I want to use fingerprint reader

actually i want to use finger print reader i download the drivers but now hp securitytool protocol manger is missing and i want to download but couldnot find it please help me.....

Hello @utopianshaNI ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a link to your software page.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

I can't use fingerprint reader on Windows 7

I'm going into Control Panel > Biometric devices, I choose a finger to enroll and then I get a notice :"Truesuite.FPR has stopped working."
Anyone else run into this one yet? What can I do to use Fingerprint?

Hey,
Have you tried running the uninstaller built into the temp folder for the B209? Try the steps listed below.
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3777182&
3. Once the download is done extracting, cancel the download.
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers. For HP computers run the Uninstall_L3.bat
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use this tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional. You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3777182&
15. Run the download to reinstall the printer
Some of the instructions are for a re-install and can be ignored if you simply need to uninstall.
As well, if necessary try running the link below from Microsoft for programs that cannot install or uninstall.
Fix problems with programs that can't be installed or uninstalled
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Using Fingerprint reader with Apex 4.2

I need help with integrating Fingerprint reader with Apex App 4.2. I want to store the fingerprint data in the database (blob column ) and be able to match the stored data with new scanned data.
Thank you.

This will be hard, you will not be able to do it purely through the web browser;
Either make an Active X control to install on the client, or write a small client which shares a cookie or similar to upload the data from. Both ways require interfacing with the actual hardware device and sending the data to the back end process.
Here is an open source matcher and analyser (with a list of supported hardware). APEX will not help you here, this will be hard work.
http://www.sourceafis.org/blog/
I would *seriously* consider something like QR codes instead to eliminate 'duplicates'.
1. register name and password to 'vote'
2. you are sent a unique QR code to your phone/email/normal mail (your vote)
3. you present the QR code to the voting process via a camera and vote.
4. The QR code cannot be reused.
Web QR is a typical example of this, and works, right now. And wouldn't be too hard to integrate with APEX. There are many examples of generating QR codes on the web, including javascript and even APEX if you dig hard enough.
Honestly, use QR codes. It will make your project more fun and with a *much higher* chance of success.
regards,

Use fingerprint reader in application software

Hi
I'm an application developer. I need to use the Lenovo integrated fingerprint reader as part of a timeclock application I am building. Basically a worker will authenticate and 'punch in' using a fingerprint scan
Where can I find doc about using the Lenovo fingerprint reader driver in my application?
Thank
Yakov

Hello and welcome,
I've moved your post here to the Technologies dev board. It's a bit of a guess on my part where it should go.
If you or others think it would be better in some other forum, we'll move it again.
And sorry, I don't have a clue how to answer your question. Hopefully someone else will join the conversation.
Regards,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Is it possible to use Fingerprint recognition in iOS7 in third party app?

We are trying to develop an app which need to include Fingerprint recognition in iOS7. We searched lots of communities to find the solution, but haven't get any correct information. Somewhere written that the Fingerprint recognition only use in native app in iPhone 5S. But we can not use that hardware (Home button)/api in third party app. I am not confirmed yet. So is it possible to use that functionality in a third party app development?

hi friend,
i am facing problem with my fringerprint machine.i dont have any idea how to connect that macine with my system and how to extract that fingerprint machine data in to my application witch is build up into Apex.
i want to use fingerprint machine to manage Employee Daily attendance.But i dont know how can i do this in apex.
if you have any idea please help me
Thanks
Manoj Kaushik

How to use the read out feature to read Korean or Arabic

I am now using Acrobat 11.And I want to use the read out loud feature to read the Korean charactors or Arabic.
But only the English words can be read in my computer.
Could some please tell me how to read other country languages besides English?
Thanks.
Have a good day.

Hello Gerd.
I have posted this question at Francois site. No answer yet.
Anyone familiar with the LAF project might be aware of what i'm talking about.
I don't believe questions about this project are not to be answered on this forum. Indeed i've found and posted some questions myself about it and get answered before.
Regards, Luis ...!

Recovering Windows password from fingerprint reader

Hello,
I have used fingerprint reader for a long time and forgotten my windows password. However, I need it now.
I'm running Windows 8 on Lenovo E530 with Fingerprint reader 6.0.200.75.
Is it possible to reveal your windows password in the same way than website passwords? And if it is, how?
Googling didn't produce results and the previous topic here referred to fingerprint reader 5.9.x with different settings page, where it was possible.
Thank you for assistance.
P

Hi and welcome to Lenovo Community.
If you have reviewed Lenovo's fingerprint utility documentation and that has not helped, perhaps calling Lenovo Support would be the best route to take.
Sometimes these public forum discussions can get into how to circumvent security. Therefore, based on the Lenovo Community Participation Rules, I am going to close this topic.
" No posts shall include instructions or directions intended to subvert security measures, including passwords, locking mechanisms, fingerprint scans, etc, or to subvert safety measures. Nor shall any posts provide descriptions to the location of, nor direct links to content related to these topics."
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Can I use Adobe Reader XI on Azure RemoteApp ?

Can I use Adobe Reader XI on Azure RemoteApp ?
I want to use Adobe Reader XI on my Template Image's Azure RemoteApp.
Error in Japanese:
AcroMissingCompWClass: AcroRd32.exe -- Application Error
Regards,
Yoshihiro Kawabata

Thank you, Eric for quick reply.
I can use Adobe Reader XI on template image on Hyper-V host.
but, I cannot use it on Azure RemoteApp by Application Error.
Replo step,
Step 1. Create Windows Server 2012 R2 on Hyper-V host for template image of Azure RemoteApp.
Step 2. login to Windows Server 2012 R2.
Step 3. execute CMD "change user /install".
Step 4. install Adobe Reader XI.
Step 5. execute CMD "change user /execute".
Step 6. launch Adboe Reader XI, and check it work fine.
Step 7. execute CMD "sysprep.exe /generalize /oobe /shutdown"
Step 8. create new VHD file from Windows Server 2012 R2's VHD by copy.
Step 9. upload new VHD file to Azure RemoteApp template image.
Step 10. update Azure RempoteApp collection by new template image.
Step 11. launch Adobe Reader XI on Azure RemoteApp client.
Step 12. ERROR.
Regards,
Yoshihiro Kawabata

HT204053 I want to use my cloud on my new iPad, but I did not set it up at first. How can I activate now?

How can I activate my I cloud on my new iPad when I did not do it during set up?

Go to Settings>iCloud, sign in with your Apple ID to create your account, then turn on the data you want to sync with iCloud. Also turn on My Photo Stream and Photo Sharing in Settings>iCloud>Photos if you want to use photo stream, Find My iPhone and iCloud Backup in Settings>iCloud>Storage & Backup if you want to use these.

Will I have to press "accept" button each time I use adobe reader?

Do I need to press the "accept " button (which I don't see) each time I want to use adobe reader?

Only once. See if anything in here helps: http://helpx.adobe.com/acrobat/kb/cant-click-accept-acrobat-reader.html

Fingerprinter reader driver for Linux

I run Ubuntu linux on my x200s laptop and would like to use Fingerprint reader for logging into the machine. Currently Lenovo doesn't seem to provide linux drivers for the fingerprint reader. Is there a plan to provide the linux driver and if so, may I know when its expected?

Lenovo does not support Linux on its systems...You can go through thinkwiki.org and see if there is a work around
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Newest version 6 will not work with Digitalpersona fingerprint reader, I want to reinstall version 5. Can you send me a link or tell me where to find it? Thank you! Howard L. Medinger

Foolishly, I got a message to install the newest version of Firefox and did so without considering the consequences. Now, my Digitalpersona fingerprint reader will not work and I have many many programs that I use this feature. (It enables me to avoid typing username & passwords for different sites). I have tried to find the older version 5 to reinstall it, but so far have not been able to do it. All the Mozilla sites just offer version6. HELP!

Yes, of course.
Here is the link for all of the versions:
[ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ Firefox All Releases]
Don't forget to hit 'Solved it'.
'''IMPORTANT NOTE: Don't forget that the previous versions might have security problems. For the latest security updates you MUST upgrade to latest version. That's what I STRONGLY recommend. If you really want to downgrade the recommended version is 3.6.21. Thank you for paying attention!'''

Why I don't use the fingerprint reader in my 5S

I loved the fingerprint reader when I first used it, until I noticed one thing: When you enable the fingerprint passcode unlock, you lose the ability to set a duration of the "Require Passcode" option to anything other than "Immediately". If I'm txting or driving with my navigation app, I constantly need to be able to get in and out of the phone, and it's very inconvenience to have to swipe the notification on the lock screen and then have to use my fingerprint to get in. I want to still be able to only have it require a passcode after x minutes, even if I use the fingerprint option. For that reason I have turned off the fingerprint feature. Is there a workaround? Does anyone else find this anoying?

Not sure what you are asking. Does your account not work on your phone, are you getting an error message ?

Using Eikon USB fingerprint reader to access accounts

I am using an Eikon USB fingerprint reader to access my coomputer.
My question is, Is there a way to configure the logging in to the computer with multiple finger print scans to use one admin account?
And does anyone know how to use this type of scanner to set up username and passwords to access website accounts?

I have the Eikon USB fingerprint reader too, on a mac and a windows. On the windows side I have always been able to set up access to web sites, but on the mac I don't think it is supported yet. Also, if you want to enable different people to access the same account, just put their fingerprint in, they don't necessarily have to correspond to the correct finger in the illustration, but if you want to set it up so that you need two people to swipe their fingerprints to access one account, I don't know.

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

I want to use fingerprint reader

Similar Messages

Maybe you are looking for