I want to use the Airport Express to play my iTunes through the house

I moved into a house that has speakers throughout the house. The speaker cables from the speakers are terminated in one location in the basement entertainment area. One thought is to hook up the speaker cables to a speaker selector to setup zones in the house. However, I would like to integrate the Airport Express device to this. It would be awesome to be able to play my iTunes library through the house. I see that there is a 3.5mm output from the Airport Express. Does anyone have a recommendation on how I might be able to set this up? Do I have to buy a stereo receiver that takes the 3.5mm output from the Airport Express and then hook the receiver up to a speaker selector? Any thoughts or tips would be greatly appreciated.

One option is to get an AV receiver that supports both whole-house connectivity and AirPlay. You would connect all of your speakers to this receiver. The receiver would control which rooms get sound. In turn, you would stream from any AirPlay-ready device to the receiver. You can also substitute an AV receiver that does not support AirPlay directly. In this case, you would connect an AirPort Express to the receiver's digital optical audio port and send the streams to the Express instead.

Similar Messages

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Want to use my Airport express to connect to my itune-air tune only.

I am travelling with my Airport Express to different countries, where I am not using it as a device to connect to the internet, but to connect my external speakers and want to enjoy my itune Air tunes.
I have had it set up back home, to connect to the internet and my external speakers.
Now, my Airport express is flashing amber, in the airport utility, I see my AirP Express, but I it takes forever to read base station configurations, so I can't make any changes.
All I need is to be able to use my itunes over my airtunes, using my Airp Express.

Ah - that fully explains what is going on.
In that case:
1. if you are currently on the road, you will need to do a hard reset of the Airport Express to return it to its default mode of a standalone base station. You will then be able to access it and configure it as necessary. And yes, the amber flashing light will persist. And lastly, will will need to reconfigure it from scratch as a remote base station on your home wireless LAN when you return home.
2. if you are home right now, read up on the use of the Airport Express stored profiles feature, to save its current settings as a remote base station. You can also create a profile for the Airport Express to function as a standalone base station for when you are on the road. Just remember to switch profiles before you hit the road. If you forget to switch profiles before going on the road, just do a "soft reset" of the Airport Express, connect to its default wireless network, and use the Airport Utility to switch the Airport Express to your previously saved "on the road" profile.

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

I want to use the Airport express to have wireless music through a home amp and speakers.

My problem is that I have a wireless router (from Telstra - Australia) on one end of the living room and then the stereo amp at the other. It is my understanding that the only way to connect everything is to have the wireless router plugged into the airport express and then the amp connected to the airport express my the rca cable. Is there another way as I do not want a rca cable running the length of my living room.
What i am trying to say is can the wireless router (from Telstra - Australia) talk to the airport therefore meaning I can have the airport sitting behind the stereo out of sight with no massive cables in my living room?
Help please..

Yes, simply have the Express "join" your existing wireless network in client mode.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

Using Airport Express to play music while surfing the web via netgear

Can I play music over my airport express (airtunes), while simultaneosly surfing via a different wireless router. As it stands I have been unable to do this, because I have to set my wireless connection to one or the other. When I link up to my NETGEAR for browsing, the remote speakers in itunes become unavailable.
Has anyone found a solution to this?

Hi, thanks for your help. It got me reading, and here's what I figured out:
The problem was when I originally set the profile I had my internet cable plugged into the airport express; So the set up assistant assumed that i would be using that as my internet connection. I just had to re-setup with the airport ONLY plugged into the stereo.
Again, thanks for your help.

I am using an airport express to stream from iTunes to my stereo. My router is a net gear type G. Setting up is no problem for the first time. But, when I close iTunes then restart I have to reset (using the reset button)and reset up. Wanna do it one?

Using a. Airport express to stream from iTunes. My Router is a Netgear type G. The express sets up fine and works the first time. When I try to use it at a later date after closing then reopening iTunes I have to physically reset the express and then go through the process of finding it again. Is this normal?

I have a 3rd generation (802.11n capable, 2.4Ghz only) airport express, my problem is that I've tried using it to extend my network and that brick wall, no matter how close I get the express to the room, the signal and throughput in that room becomes abysmal.
As you might imagine, brick is a lot like cement, and it will not allow much of the wireless signal through.
Regarding your Express, there is no such thing as a 3rd Generation model....yet. You likely have a 1st Generation AirPort Express. Check and confirm the Model No on the side of the Express. A 1st Gen model is A1264.
Here's my problem, I don't think the express supports "extending" a network from a wired network jack.
The Express can "extend" wirelessly, or using an Ethernet connection. The configuration for this is very simple, but post back if you need it.
The jack just seems to be shut off
Have you temporarily turned off the wireless on a laptop and tried to connect it using an Ethernet cable to the wall jack as a "test"?
If you can get a good Internet connection this way, then you know the Ethernet cabling and jack are working correctly.
On the other hand, if you cannot get an Internet connection on the laptop during this "test", then this indicates that the Ethernet cable or jack is not functioning correctly and the wiring will need troubleshooting before you can proceed any further.
I need to create a whole new wireless network in this room for this configuration to work?
AirPort Setup will take care of this for you automatically during the configuration of the AirPort Express.
If I have an apple TV connecting to the express and an AppleTV connecting to the extreme, will they both be visible when connected wirelessly to either network?
Yes
Will I be able to connect to my network seemlessly?
Yes
Post back after you have confirmed that the Ethernet cable and Ethernet jack are functioning correctly in the temporary "test" mentioned above. Then, we will continue.

Just want to use my Airport Express for airtunes

I have a 2WIRE DSL wireless router/modem that is working just fine. I'm trying to add an Airport Express just to play Airtunes thru my home theater - not to extend my 2WIRE signal. Every time I try to set the AE up it fails on restart. Any one?

Let's double-check the steps necessary to configure your AirPort Express Base Station (AX) to join your 2WIRE wireless network for iTunes streaming.
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing 2WIRE's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

I just set up a wireless network using an airport express. How can you change the network name

How can you change the name of a wireless network set up with an airport express

Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

Can I connect the Airport Express to a TV and watch the screen of my Mac on the TV?

Could I know if I can connect the Airport Express to the TV and watch the screen of my Mac or iPad or iPhone... On the TV?

Welcome to the Apple Support Communities
That's not possible with an AirPort Express. However, what you can do is to use an Apple TV if you want to mirror your iPhone, iPad and Mac onto the TV, being all of them connected to the AirPort Express. Read > http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

The airport express needs to be plugged into the modem to work?

I already have a wifi device plugged to my modem I was trying to get a wifi extension signal to the other room. I boguht the airport express expecting to get wifi signal without having to plug it to the modem. Is that possible?

As I said....
The AirPort Express can "extend" the wireless signal of another Apple product....an AirPort Extreme, Time Capsule, or another Express......using wireless only.
Another way of saying the same thing is that you must have a minimum of two Apple routers if you want to be able to "extend a wireless network".
The Express will not be able to extend the signal of your Xfinity modem/router using wireless only. It should be able to "join" the wireless network if you want to connect a remote printer or use AirTunes. But, the Express will not provide any additional wireless signal coverage when it "joins" a wireless network.
You will need to plan to connect the AirPort Express back to your Xfinity modem/router using a wired Ethernet connection if you want the Express to provide more wireless signal coverage for your network.

HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way. If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

I have a Time Capsule as my main WiFi router in my home. I'd like to extend my WiFi service to my guest house located approx 100 feet away. Will the AirPort Express fill this need? Is the AirPort Extreme a better fit?

I am using a Time Capsule in conjunction with my IMAC 27" system as my main WiFi router in my home. I would like to extend my WiFi service to my guest house which is located about 100 feet away. Can I use the Airport Express to provide this extended range? Would I be better served to use the Airport Extreme? Thanks!

The normal location for an AirPort Express or AirPort Extreme is a point that is about half way between the main router....the Time Capsule in this case.....and the area that needs more wireless coverage.....the guest house.
I doubt that you will be able to locate an AirPort at this "half way" point, correct?
Before you buy anything, take a laptop, iPhone, iPad, etc out to the guest house as a test to see if you can log on and get a reliable Internet connection over the wireless.
If you can, then either an AirPort Express or AirPort Exreme could be used to provide additional wireless signal coverage in the guest house.
If you cannot get a reliable connection with the "test" mentionded above, neither AirPort will help since they can only "extend" the quality of signal that they receive.
If this is the case, you will need to look at running an Ethernet cable from the Time Capsule out to the guest house to provide the reliable connection that you will need.

I have the airport express and trying to connect to the internet on my Vizio and can't find a code to put in to connect..

I have the airport express and trying to set up internet service on my TV (Vizio) but having no luck.... I need a code to enter in order to connect! Can you help?

Hi - you might be getting full bars but a slow connection - games can be very sensitive to this - have you tried connecting via ethernet to see if it is better? - however if your wireless speed is good too then it could be a ps3 issue and a call to their support might help - otherwise there could be interference issues, radio channel conflicts, etc. - without knowing the specific aspects of your entire network environment it is hard to make any more suggestions.

I want to use the Airport Express to play my iTunes through the house

Similar Messages

Maybe you are looking for