I want to write the name (label) of push_button in multiple lines.....

I have a push button, I want to write the name of it in multiples lines because its too long so how can we do it... I mean I think there's some coding or any thing else. Just if we want to label a button we take it properties and in the label properties we write its name but if the name is too long then it does not come from the next line..We have to maximize the button so the full name comes....How we can do this thing that the name comes from the next line or in multiple lines....

Also, you could make a text item, with raised bevel and a when-mouse-click trigger:
Re: Changing caption of a single row button in multi-record block

Similar Messages

HT4437 I have a Pioneer VSX-1012-K and i want to change the name of it on my iphone to something elce. Is there any way i can do this.

I have a Pioneer VSX-1012-K airplay amp and I want to change the name of it when i am using AirPlay. Is there any way i can do this?

If it is showing off line, either the battery is dead, the SIM has been removed or the iPhone has been restored. Report it to you carrier. Some offer blacklisting. You can also send a remote wipe to the phone via iCloud. There was also the option to send you an email if the phone is located when you were in Find My iPhone. Report it to law enforcement, change the passwords on all accounts that were on the device. Did you have a passcode on it?

How to access the Name label tag of a layer.

Hello I need to access the Name Label of the Action layer in a movieClip with AC3.

movieclips have a currentFrameLabel string property, a currentLabel string property (the current or previous labeled frame) and a currentLabels array property.

I want to know the name icloud account

I want to know the name icloud account
<Personal Information Edited by Host>

Hi,
As Rich Mentione there is no BAPI for Schedule Agreeement.
You can Try : ME_UPDATE_AGREEMENT_PO -Update Pur Document
ME_READ_OUTLINE_AGREEMENT_DISP --Read outline agreement item (From Agreement no and item no)
Lanka

I've bought three new ipod products and want to change the name of my old ipod when i plug it into my laptop. how do i do this

When you plug your ipod into the computer it's name comes up. ie bill's ipod. How do you edit the name. I've recently bought some new ipods and want to change the names of my old ones.

Double click the iPod under Devices in the source list on the left side of the iTunes window then type in a new name.

I just want to change the name of my network. no other settings?

I just want to change the name of my network. no other settings?

We can likely help, but we do not know what device that you are asking about....or....what version of AirPort Utility that you have on your computer.
(Normally, we would know things like this, but our crystal ball is broken).

I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

Can you use the number 3 key elsewhere?
[topic moved to Downloading, Installing, Setting Up forum]

Want to edit the name of the std. key figure

Dear All,
I want to edit the name of the key figure from the standard s001 info structure. I aslo want to add new key figure as High edu cess in my MCTA. I am working in mfg. co. where as we are compairing our sales register with mcta report but in mcta report high edu cess is not coming.
while compairing with sales register the name of the filed is not matching with mcta key figure for example
1) billing doc. ps5 = tax amt.
2) Net inv. SIS2 = BED (excise duty)
now I want to edit the name of net inv. SIS2 as excise duty (bed charges).
I need help in this case.
Nikhil

Hi,
If you want change the name of key figures, see this answer i thread :
how to change the description
You can enter element data to modify the description.
Warning : if you change this element data, all program displays the new description.
Another solution : use this extension MCR00002 to modify description for key figures.
Or create flexible analysis (Tcode MCSA) in ref to S001 (evaluation structure). In this analysis, you can add new key figures by using formula (in ref to std key figures like Bill. doc: PS 5 = S001-UMKZWI5).
Regards,
Lionel

Want to see the names of pictures in Ipod.

Simply I want to see the names of pictures in my ipod.
When I view the photos in my ipod, I see pictures only. Is there anyway i can see pictures and the names at the same screen?

There is no Way to see the Names of your pictures but you can Suggest it to Apple
http://www.apple.com/feedback/ipod.html

Want to change the name of the tab

Hi All,
I want to add a new tab at Header level for sales transaction using transaction EEWB. However it will always have the name as 'Customer fields'. I want to change the name of the tab in SAP GUI not in PCUI.
Thanks for your help,
Regards,
Smruti

Hi,
Use the badi "MB_MIGO_BADI". See the sample code & BADI documentation for reference.
Regards
Vinod

I want to change the name of paragraphs styles. Is this possible by script.

I want to change the name of paragraphs styles. Is this possible by script.
Thank you

Hi Hasvi,
May the below coding helps for your question:
var myDocument = app.activeDocument
var myPStyles = myDocument.paragraphStyles.everyItem().getElements()
for(i=2; i<myPStyles.length; i++)
myPStyles[i].name = "A_".concat(myPStyles[i].name); //Please change as per your requirement
//myPStyles[i].name = "BBBBBB_".concat(myPStyles[i].name);
Please use the below URL for more details.
http://forums.adobe.com/message/4909340#4909340
If my answers helps you, please provide "Helpful" or "Correct Answer" for me.
Thanks
Siraj

Although we have iPhones and iPads, this is our first mac pc and we wanted to know the best way to set up multiple users with parental contro;s

although we have iphones and ipads, this is our first imac and we wanted to know the best ways to set up multiple users with parental controls

I'm assuming you have the lastet OSX version 10.9 "Mavericks." Here are some useful links from Apple I think will help:
http://support.apple.com/kb/PH14414
http://support.apple.com/kb/PH14099
http://support.apple.com/kb/PH14280
and a video:
http://support.apple.com/kb/VI28
I suspect you have a newer iMac than the pre-2006 models this forum covers (the forum labels are unbelieveably vague). If you can confirm that yours is newer than 2005, I can ask the Hosts to move you the the forum for current iMacs, which gets many more views.

How do I access my music in iTunes without downloading? I want to hear the music not save it on multiple devices...

How do I access my music in iTunes without downloading? I want to hear the music not save it on multiple devices...

Thanks, I tried that. It shows me only the songs i purchased and just gives me a snippet of the song. After much more reading and a phone call, it looks like Match will stream all the songs in my iTunes account without having to download them, but of course for a fee :( Thanks though.

How can i make the input/output field to a multiple lines in ModulePool...

hi all...
can any one please let me know, is there any possibility thru Module Pool program where i can make the input/output field to a multiple lines...
say, when we drag & drop the input/output field on the screen - it'll come with single line display. so, how to make the same field to multiple lines field.
rather i can say my question like, how to increase the height of the input/output field.
Desired Functionality:
The user wants to display a long text.
now the input/output field should not display the record as a single line, now the field has to display the text in multiple lines (something like wrap option in ms excel).
hope u got my question...
please help me in this regards...

hi Rengith, i'm not using Text Field, i'm using Inpu/Output Field to display the long text.
If u mean text field as input/output field then can u let me know the process for this, how to do the same thru module pool program...
Edited by: murashali on Mar 18, 2008 1:36 PM

Copying the item text in case of multiple line items

Hi All,
                I have a scenario where the sales order gets created in our SAP through a 850 idoc. The incoming idoc has only one item segment which carries the total order quantity ( for example say 1000). Since my company has contractual agreements with the end customer for doing multiple shipments , our sales department splits the total quantity into multiple line items in the sales order. Say splitting the 1000 quantities into 5 line items of 200 each.
The problem here is that when the sales order got created , all the related item text were copied only to the first line item ( of 1000 qty) and which is standard SAP. Since the order quantity was manually split, the related item text are not carried to the subsequent line items. The issue comes when an outbound (810) idoc is sent to customer . As I told earlier since only the first line item has the item text , the 810 idoc which was created for the first line item only has the item text . The rest of the 810 which were subsequently created for multiple shipments/invoices on different dates didn't have the item text in the 810's. This is becoming a major problem as the 810 files are failing at our trading partners end because of missing text.
Now my question is, Is there a way that I can make the item text copy automatically when multiple line items are created manually by business. Like is there a way where I can modify MV45AFZZ to copy the item text in their respective segemnts ( z003,z004 etc) to "N" number of line items.
Also please suggest if there is a better way of doing it. Suggstions are most welcome !!!.
Regards
Amrith

Hi,
First of all try to avoid doing select into corresponding fields. THis would improve the performance of the program.
Try to do a single fetch from the BSIS table . fetch the hkont, belnr, dmbtr fields in to a master internal table. Manipulate and play with the data as required. Don't hit the data base table more than once (unless it is required) . This would improve the performance of your code.
Try to code this way.
types: begin of ty_bsis,
             hkont type hkont,
             belnr type belnr_d,
             dmbtr type dmbtr,
          end of ty_bsis.
data: it_bsis type standard table of ty_bsis,
         wa_bsis type ty_bsis,
select hkont belnr dmbtr
          from bsis
          into table it_bsis
          WHERE HKONT IN S_RACCT
        AND PRCTR IN P_PRCTR
          AND MONAT IN S_POPER
         AND BUKRS EQ P_BUKRS
         AND GJAHR EQ P_GJAHR
          AND PRCTR IN S_PRCTR.
Using the data availabe in the it_bsis, you can manipulate as required.
Hope this would be helpful
Regards
Ramesh Sundaram

I want to write the name (label) of push_button in multiple lines.....

Similar Messages

Maybe you are looking for