I want trigger source code

Hi to all,
i want trigger source code through oracle query . i know this is java forum if any one know this query plz reply me
Thanks
supriya

macrules2 wrote:
kajbj wrote:
priya_naidu wrote:
Hi to all,
i want trigger source code through oracle query . i know this is java forum if any one know this query plz reply me So why didn't you ask in an Oracle forum?It's all Oracle's now ;)not until the shareholders, EU, US gov, and SEC give their approval.

Similar Messages

I want jvm source code

Jvm I want all the source code, who can help me?
Thank you

Go to [http://openjdk.java.net/|http://openjdk.java.net/]
See "Source Code" on left nav bar
Select how you want to access the source.
-Roger

Wanted: Sample source code for voice recorder

I've been google searching for some sample source code to implement a voice recorder on my AudioVox 5600. I would like to learn how to read from the microphone and write to my SD card in a standard file format like wav, wma or mp3.
Can anyone help me understand how to do this?
Thanks,
Siegfried

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

How to release top-level VI (only) source code?

Hello,
I am developing an addon to an application I already have. The application is large (over 1,500 VI's) and the VIs are set up to compile with mostly default settings (there's a top-level VI, a few with Front Panel visible, most of them are not visible).
The customer wants the source code to the work I'm going to do, and it's going to use many existing sub-VI's. The addon itself will be a sub-VI (I have a Main.vi that basically opens 'screens', and this is a new screen). The existing sub-VI's basically do the data collection and processing, and the new code will do some additional processing and have a nice GUI to the existing code. The customer wants the source so they can make modifications as needed.
Is there any easy way to provide just the source for the top-level VI? Basically, I want to give them M.vi, where M.vi calls n.vi, o.vi... etc, but o-z.vi need to remain closed-source. Also, M.vi is called by Main.vi, which opens screens A-M.vi
One option is do copy the entire application, then open every sub-VI and save it without Source Code. But with so many files, this seems like a bad idea. I also then have to maintain two applications.
Any good ideas out there? It seems so easy in other languages (use object files) that it seems like there should be a solution here I'm not seeing.... Thanks!
Message Edited by rnelsonee on 06-02-2010 08:28 AM
Message Edited by rnelsonee on 06-02-2010 08:31 AM
Solved!
Go to Solution.

Dont know if this is the best solution for you, but you can create a "virtual folder" in the LabVIEW project with all the sub-VIs that you want to keep closed-source. Then create Source Distribution build specifications in the project and remove the block diagrams assign passwords to all VIs in the virtual folder. See attached pics.
Attachments:
Project.JPG ‏23 KB
SrcDist.JPG ‏62 KB

Where does the source code of linux reside in arch

Just wonder where is the source code. In freebsd, all the source code is in /usr/src, does arch have that directory? or do I need to install something to get source code?

tomk wrote:Arch does not install the source code for anything. Under /usr/src/linux-2.6.17-ARCH, you will find the kernel headers required for building other apps, but apart from that, if you want the source code for the kernel or any of the apps, you need to get it from the relevant website/ftp server/etc e.g. kernel.org for kernel source.
no, those headers in there are for kernel modules only. the headers for applications are a sanitised copy based on 2.6.12 and exist in /usr/include/linux.
As for the source to Arch packages, we have something similar to fbsd's ports system (ports is on fbsd isnt it or am I wrong), it's called abs:
http://wiki.archlinux.org/index.php/ABS#The_ABS_tree

Tetris source code in Xlet

Hi,
Can anyone please post me the tetris game source code in Xlet?? I have found source code in which points(polygon) are taken to create the shapes. I want the source code in which images are used to create shapes.I have tried by using four small rectangle type colored image and combining them together to make single images that are of L-shape,I-shape,T-shape etc..etc.Also I want the codes of positioning the shapes and the disappearence of the lines when it is completely filled. Kindly help me .I am in urgent need of the source code.
The code should be in Xlet.

Hi,
Hey thanks. I am able to log into the site. I also got the code but again i found that the code is written by taking points and colors to create the shapes. I need some codes in which the shapes are created by taking colored images somewhat in this way,
colorImage[0] = TrackPicture.loadImage("./images/square_red.png", 29, 29);
          colorImage[1] = TrackPicture.loadImage("./images/square_blue.png", 29, 29);
          colorImage[2] = TrackPicture.loadImage("./images/sqaure_yellow.png", 29, 29);
          colorImage[3] = TrackPicture.loadImage("./images/sqaure_green.png", 29, 29);
These are the images and by taking co-ordinates they are joined to create shapes. I have tried combining them through the paint( drawImage )method. Please give me some solutions if you have. Thanks in advance.

Download java.nio package source code

Where can I find NIO source code? Any Java 5 version would be great.
This code is open source.
thanks!

Sun's NIO source can be downloaded from the JDK d/l page.
This IS NOT open source code, you have to agree to the license terms.
If you want open source code, check out the OpenJDK project at java.net

I want to see the source code of JVM

Can anyone tell me how to see the source code of JVM, but not the src.zip that including in the java libraries. I just want to know how Java is implemented.
Thanks a lot for any answer.

You can get the source code (written in C++) of Sun's VM under the Community Licence arangement. Not sure quite where it is on this site, but if you look for it, I'm sure you'll find it.
BTW, it's not easy reading.
Sylvia.

I want to get the source code of the examples of berkeley DB with Java

Hi
I want to get the source code of the examples of berkeley DB with Java
Thanks and Regards
Rahul

Look in the "examples" directory, in the BDB JE package that you downloaded.
--mark

I want to update source code based

Hi Guru ,
My requirement is like - i want to replance all name space (/ABC) to (/XYZ) in All table , Program .
Please suggest which is better way for that.
Example.
/PAYMETRC/PM30 to /XYXMETRC/PM30 like Remane .
Same thingsh should be replace in source code like in source code - table is USING /PAYTABLEPARAM TO /XYZTABLEPRAM.
Same in Structre - Data Field , Data Element and Domain,,.. etc.
Please suggest what is best way for taht can we do it programatically and Manul.
Thanks
Durgesh

Hi Soumya,
Its not standard code . Its all Z programe more than 2000 and using only z table . in this i want replace all table name , data element , domain to customer name space based on custom requirement .
eq. Z table is using in ZPROGRAM LIKE ZBAAPARAM table to change customer name space ZABCPARAM and same in data element and domain with having custom declaration.
That is only one simple example .
As i know here by two way i can do --
1. Manual
2. Programatically.
BY using manual is lot of time takan - more than 100000 object need to convert Z name to some othe z custom name space.
Programatically it can fit or i dont know .
Can any suggest me about this requirement.
Regards
Durgesh

Source codes wanted

does anybody have codes for any of the following reports?
·     Report for Sales Orders due for delivery.
·     Revenue Reports based on Order Types.
·     Report for list of Pending Purchase Orders, Cancel Purchase
orders.
·     Interactive Report that lists out all the materials for a given
plant. Secondary list contains Vendors who supply the chosen material.
·     Analyze material receipts & issues. It finds the balance of
issued goods & received goods based on plant, storage location, and
material in particular period.
·     Classical Report list sales order line details for those orders
where the confirmed quantity is greater than the quantity PGI (post goods
issued) after the customer requested delivery date has passed. Price list analysis report using various pricing procedures and pricing conditions.
·     Report for displaying the material batch information such as
storage location, batch number, fiscal year, stock details for the given
range of materials, plants and period information.
·     Purchase order Report.
·     Purchasing Requisition pending report.
·     Interactive Report for displaying Vendor Information based on the
selection made the corresponding Vendor Bank Details is listed.
·     A report to get all the sales order with particular delivery.
·     Report to display the item purchased in a particular period of
time, the vendor information, and credit period.
·     Report that lists the shipping point, loading point, transport
partner name and the shipping date given the sales order number as user
input.
·     Report for Material Requirement List for a Production Order. It
displays the quantity of materials required to produce a material based
on its BOM for any date duration.

Hi Seenu,
You said that you are able to see the screen. On that screen follow the following navigation.
System -
> Status
Now you will able to see a dialogue box. In that you will find program name.
Copy that program name and go to SE38 TCode, and paste there. Now click on display push button. Now you can see the source code.
Regards,
Ramesh.
Mark all helpful answers.

Need sample source code for calling stored procedure in Oracle

Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.

Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause.

Customize interface without touching the source code

My VP of of marketing is at it again. I have pasted in the exact email that he sent me. If anyone has ideas or suggestions or knows if Forms 9i has this built-in capability, please let me know.
Thanks.
Can you post this on metalink and see if someone at Oracle (or elsewhere) has an answer for us? Somehow, other LIMS developers are distributing LIMS products that allow their users to customize the interface without touching the source code -- no impact on their ability to take new releases. How do they do that?
Here's my question:
Anyone familiar with the Tools / Forms / Design this Form feature in MS Outlook? This allows a mere mortal to actually create and publish a custom Outlook form (could be a Contact, Task, Note, Journal, etc. form) across the organization. Is there such a capability built into Oracle9i Forms? In other words, can a developer easily build and distribute an Oracle software app such that the end-user can use an administrative tool to modify the interface/forms, add fields, change field names, move things around on the form, change colors, etc. -- without needing the Oracle Developer tool used by the original software developer, along with source code?
Here's my original email from a few months ago:
Our VP of marketing has been on my case about the ability to allow customers to "map" a form label (prompt) to a "custom" label of their choosing. The only way I know to do this is to create a "mapping" table and each time a form opens have code in the Post-Query trigger that changes the prompt of each column to the label that is in the "mapper" table. My fear here is Performance. Also, if the user closes that form and comes back to it - that logic has to be executed again - once again Performance. We have thought about the global variable idea, but we have over 100 tables with approx. 20 columns each. That's alot of globals to carry around. What's the overhead of carring around let's say 150 global variables?
My questions to all of you are:
1) Is anyone else doing this exact thing?
2) If so, what is the performance hit?
3) Is there a way to "remember" after the first time it paints - until the application is closed (not just that form) - other than global variables?
4) Is there a solution already in place within Forms for this?
5) Is there newer technology that has overcome this problem?
My VP doesn't like the mapping idea. He wants to know isn't there a better way instead of mapping all the fields. Isn't there some simple utility provided by Oracle that allows the user to simply change the form labels (no, he's not talking about Oracle Developer). He is a real Outlook nut. So he's always comparing everything to how Outlook works. This is how it works in Outlook -- you click on Design Form, modify it, then install it on the machine. Surely Oracle must have something like this. He thinks we're asking the wrong question or not asking it in the right way. I'm not sure how else to ask it. Our users want to see "Date of Birth" spelled out instead of "DOB" as the label for a column on a form. Is there a way for them to take the fmx and change that label? Is there a better way other than storing this in a table and querying it up each time the form opens? Yes, I could use a global so I don't have to query it from the database every time, but I still have to evaluate every time the form is opened during that session to see which label I need to use and then set the prompt accordingly. Our VP doesn't like this, he wants this to be a one time change.
Thanks so much for you help,
Tina

Hmmm.... either your VP of marketing or the users have too much time on their hands. ;-)
I would go with a lookup table. If your database is responsive and you index the table by form name, you can retrieve a number of rows and setup the screen quickly enough that nobody would notice any time lag.
If there aren't too many titles stored in the form, you could use a PLL library procedure and stuff all of them into a few globals -- just stack them into a single string separated by an odd character, like maybe chr(3). Then when the form is called again, it could first check to see if the globals exist, and parse the titles from there.
But be careful about changing field titles. If they change DOB to Date of Birth, the length changes, and so you need to determine where the extra length goes. The title field must be wide enough and the text justification should be set properly.

How to track DDL Changes and source code changes

How can I track the DDL Changes and the Source code (Functions,Procedures,Packages & views) changes made for selective schemas?.
I mean I want to maintain the history of DDL changes and the sourcecode change history. How to do that? Please provide your guideline with some example...

Hi,
you could use a DDL trigger (before create)
to maybe capture the code and do the audit as well?
Try this:
SQL>create table old_code
2 as
3 select user username, 0 version, sysdate date_changed, user_source.*
4 from user_source
5 where 1=0
6 /
Table created.
SQL>create sequence version_seq;
Sequence created.
SQL> create or replace trigger create_trigger
2 before create on schema
3 declare
4 l_date date := sysdate;
5 l_ver number;
6 begin
7 if (ora_dict_obj_type in ( 'PACKAGE', 'PACKAGE BODY', 'PROCEDURE',
'FUNCTION' ) )
8 then
9 select version_seq.nextval into l_ver from dual;
10
11 insert into old_code
12 select user, l_ver, l_date, user_source.*
13 from user_source
14 where name = ora_dict_obj_name
15 and type = ora_dict_obj_type;
16 end if;
17 end;
18 /
Trigger created.
SQL> create or replace function f return number
2 as
3 begin
4 return 0;
5 end;
6 /
Function created.
SQL> select * from old_code;
no rows selected
SQL> create or replace function f return date
2 as
3 begin
4 return sysdate;
5 end;
6 /
Function created.
ops$[email protected]> select * from old_code;
USERNAME VERSION DATE_CHAN NAME TYPE LINE TEXT
aaaaaaaaaaa 2 17-OCT-02 F FUNCTION 1 function f return number
aaaaaaaaaaa 2 17-OCT-02 F FUNCTION 2 as
aaaaaaaaaaa 2 17-OCT-02 F FUNCTION 3 begin
aaaaaaaaaaa 2 17-OCT-02 F FUNCTION 4 return 0;
aaaaaaaaaaa 2 17-OCT-02 F FUNCTION 5 end;

4472 external trigger source name

Dear All,
I have a PCI-4472B which I want to program in order to acquire a signal from channel 0 whenever it recives a TTL signal throw the External Trigger input.
I'm using a modified example but I don't know which is the name of the external trigger source. I always recive this kind of error (for example if I connect a string containing "EXT_TRIG"):
code: "-200265"
"DAQmx Start Task.vi:1<append>
Property: Start.AnlgEdge.Src
Corresponding Value: EXT_TRIG
Task Name: _unnamedTask<DB>"
The program I'm using is of this form:
First of all, does this error mean that I didn't input the right external trigger source name?
If so, which is the right name of the external trigger source for NI4472B?
Thank you for help

Hi tooooommi,
would you mind expanding the error message? I cannot see the entire message and there should be more information about the error that we can use to solve it.
Also, have you tried connecting another Physical Channel control (like the one that you connect to the AI Voltage function) to the Start Analog Edge function? That may allow you to browse to find the right source for your analog trigger.
Let me know, so I can try to help you further. Best,
Corrado Degl'Incerti Tocci
Application Engineer

I want trigger source code

Similar Messages

Maybe you are looking for