I want XSLT do not create any output file

I have a xslt file.
<xsl:variable name="var:InValidReceiptCount">
.... In here. I want xslt do not create any output file, also an empty file
</xsl:variable>
Thanks for helping :)

If you can tell us your application scenario and why you are trying to control the output name only with xslt, then we can drive you towards correct direction. Remember you cannot control output path with xslt.
if you are using bizTalk, you have to use xslt with maps and set the output path at ports
if you are using .net, you have to control it from your dotnet code.
Xslt alone cannot control the output path.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

Should not create any output file when transform with xslt file

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?
any help will be appreciated!

Do you mean the xslt file always return the output file?
I have tested this xslt file following (only xslt file, not run in BizTalk project):
Create a blank console application using visual studio and add attached xslt file to newly created console app. Next open the XSLT file and select input file and output files and start xslt debugging to create output file.
I want to edit the xslt file how to cannot create output file in the case OrderStatus = Reject.
I don't say in particualr xslt file, its actually your map as a whole that returns a output message on successful execution.
since you are testing the xslt file as individual file, you are able to control it as per need. i mean you can write incomplete code or any kind of output elements that are not present even in schema. But when you set the map properties to use external
xslt , map completely relies on xslt and xslt has to produce output that matches the output schema structure.
So you better test your xslt by setting it to your map. Once you set map properties to use xslt, you can test your map by right clicking on map and choosing test map.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Should not create any output file when invalid input source schema

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?

I'd ask them over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Log4J not creating any output file

Hi,
I've just started looking at log4j and following a simple example online.
I have the folowing properties file
log4j.rootLogger=INFO, stdout, logfile
[color=#444444]
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=%d %p [%c] - <%m>%n
log4j.appender.logfile=org.apache.log4j.FileAppender
log4j.appender.logfile.File=c:/mylog.log
log4j.appender.logfile.MaxFileSize=512KB
# Keep three backup files.
log4j.appender.logfile.MaxBackupIndex=3
# Pattern to output: date priority [category] - message
log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d %p [%c] - %m%n
[color]
I have the properties file in my classpath.
Problem is the file never gets created. The output goes to the console alright. What step might I be missing? I just followed this tutorial.
http://vegdave.wordpress.com/2006/08/31/how-to-con...n-tomcat-for-one-of-your-apps/
looks very simple but can't get it to work, no errors being thrown in the console

user13477955 wrote:
I have the properties file in my classpath.Runtime classpath?

The system could not create any outputs for mv type 561

Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

issue is resolved

Report RCCLROUT does not create any output

Hi experts,
I hope someonw can help me on the following incident:
Running report RCCLROUT from se80, I do not get any output.
However, the report#s description says:
*& Creation of routing IDOCs to a given selection                      *
*& This program selects to an input given via the selection screen the *
*& corresponding routing data from the database. Then the function     *
*& module for creation of routing idocs is called.                     *
*& In general this report is called from the report RCCLMDAT, but it   *
*& can also be used for its own.                                       *
I read the source code an found out, that the selection is not used.
In my simple understanding, just the function call should be un-commended.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
*CALL FUNCTION 'CLOI_ROUTING_READ'
*     EXPORTING
*          date_fr   = date_fr
*          date_to   = date_to
*          lot_fr    = lot_fr
*          lot_to    = lot_to
*          mestyp    = mestyp
*          logsys    = opt_sys
*     TABLES
*          matnr_ro = matnr_ro
*          werks_ro = werks_ro
*          rout_data = t_mapl
*     EXCEPTIONS
*          others    = 1.
*&   Event END-OF-SELECTION
end-of-selection.
As nobody changed the report and it is last used by SAP, I woder myself about how to get my LOIROUT02 EDI File....
BTW: all of the other reports in this development class are working fine.
I'd be thankefull for any response...
Data of SAP: 4.6C;
Data of Report:
Title       Generate Routing IDocs
Original language      DE   German
Created                29.01.1997       SAP
Last changed by        01.04.1998       SAP
Status                 Active
Type                  Executable program
Status
Application           PPC
Authorization groups
Development class     CLOI                  for logistics optimization
Logical database
Selection screen

Thank you very much for your quick response.
I have implemented Userexits for Planed Order, Production Order and Work Center to fill my extension segments.
The Settings are defined correct and the Data (Files) are created for the above and the BOM Files.
(BOM s are also used in standard)
Only the Routings (in Standard) are not working correct.
I have no RFC components and therefore nothing to configure. All of the other settings did work (at least) for
- LOPLO01
- LOPRO01
- LOIBOM01
- LOIWCS01
I will try to use FUB CLOI_ROUTING_SEND instead.
If this works, than it's a bug of the report as far as is see.
FUB CLOI_ROUTING_SEND works fine!!!
Any ideas?
kind regards
Christoph
Edited by: Christoph Huber on Dec 1, 2008 10:21 AM

Get-EventLog System -Newest 1 is not giving any output

Note getting any output from below script when I put Newest 1.. but when i remove Newest , i get the output.
why so..
I need only latest event id in output
Get-EventLog System -Newest 1 -ComputerName (Get-Content D:\script\serverlist.txt) | Where-Object {$_.EventID
-eq 1074} | Select-Object EventID,MachineName,TimeWritten,Message
Please help or guide me on this

Here is one way to seek the instance when it is a debug event.
$EventID=1074
$instanceID=[uint32]([uint32]1074 -bor 0x80000000)
Get-EventLog -LogName System -InstanceID $instanceID -Newest 1
There is one other mask that should never appear in a production system. It is used to flag records that are inserted as test records. THey are ued when we want to test a programms error capabillity but do not want the eventing system to retain
them or act on them. I believe it is 0x40000000.
We can also cascade ID.
$EventID=1074
$instanceID1=[uint32]([uint32]1074 -bor 0x80000000)
$instanceID2=[uint32]([uint32]1074 -bor 0x40000000)
Get-EventLog -LogName System -InstanceID $instanceID1,$instanceID2 -Newest 1
Without the Newest 1 this would return both kinds of records.
If you can use Get-WinEvent as it mmasks all of these to use true EventID. It is alos much faster and more flexible. As soon as WS2003 is ended Get-Eventlog is likely to be marked "Deprecated".
Get-Content computers.txt |
ForEach-Object{
get-winevent -FilterHashtable @{Logname='System';ID=1074} -MaxEvents 1 -ComputerName $_
¯\_(ツ)_/¯

Not getting any output when running the Webservice through Xacute

hai all,
I am using a transaction as web service to be called in another transaction in the same server. I can see the output of the web service in the tracer, when I execute it in the BLS. But if I run the same transaction via xacute query I am not getting any output. I had read in one of the threads that reference document has to be assigned. I tried doing that also, but no luck. Can somebody pls. throw some light on how to use reference document & whether it is required in my case?
Thanks,
vidhya

Hai Rick,
thanks for the hint i have used document and row actions now iam gettting output through xacute...
thanks,
vidhya.

"Cannot evaluate parameter 'NewName' because its argument input did not produce any output." error received

I need to rename a set of files with a subset of the files' original name. I wrote this script:
dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'){$name=$matches[1]; -replace '.+', "$name";}}
This works in that the file and/or directory names are changed, but it also gives me the error:
Rename-Item : Cannot evaluate parameter 'NewName' because its argument input did not produce any output.
At C:\...\FileStrip.ps1:1 char:28
+ dir | rename-item -newname {if ($_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (Vivek Shyam:PSObject) [Rename-Item], ParameterBindingException
    + FullyQualifiedErrorId : ScriptBlockArgumentNoOutput,Microsoft.PowerShell.Commands.RenameItemCommand
I'm not sure how to fix this. Any assistance would be appreciated.

ok, thanks.
You've avoided the whole 'use the piped data implicitly' thing by the explicit ForEach. I'm ok with that, but I'm still curious how to get the non-ForEach version to not error.
Anyway, what you provided almost worked. I modified to be this:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        $match=$matches[1]
        $newname=$_.Name -replace '.+', "$match"
        Rename-item $_ $newname
to get it working properly.
But it looks like the simplest form is:
dir -file |
   Where{$_.name -match '\d{4,5}\-\d{5}\s\-\s(.+)\s\-\s.+\s\-\s.+'} |
   ForEach-Object{
        Rename-item $_ $matches[1]

Keynote 6.2 foes not open any previous files. Even the one created 1 week ago.

Keynote 6.2 foes not open any previous files. Even the one created 1 week ago.
I have 2 computers and both gives the same bug.
Either Keynote says that the file cannot be opened or it crashes.
What can I do?

Check you are using the correct version of Keynote to open the files; right click the file and select Open With > Keynote 6.2.

SQL 2012 - SSIS Error -The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.

Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

New package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

Iphone locked itself? I did not create any password!!

When I was in China Iphone locked keypad itself? I did not create any password before!!

You should have set up a password. It is important to have one in order to prevent other users from installing applications and to make your Mac safer.
If you have set up your Apple ID, you can try resetting your user password with your Apple ID > http://support.apple.com/kb/HT1274
If it does not work, reset your user password through Recovery > http://discussions.apple.com/docs/DOC-4101 Then, set up a different Keychain password > http://support.apple.com/kb/ht1631

When i am doing proxy recording it is not creating any parameters

Hi All,
When i am doing proxy recording in e-tester and it is not capturing parameters and finally i am not creating any databank inorder to do Auto Map or Auto Bind.Please help.
Thanks
Vsk

HI
If you are doing an external proxy recording eTester will not record the parameters, however Navigation Editor will have them, and since you only need that for load testing that wont be a problem.
Regards
Alex

Monitor is not displaying any output

Hi all,
I have sun ultra 25 workstation with solaris 10 OS with SUN XVR-300 graphics card. my problem is that monitor is not displaying any output however monitor is fine with another workstation.
when I powered on workstation, front panel shows green light.but monitor is not showing any output. however VGA cable and monitor is OK.
I am in trouble PLZ help me ASAP.
T&R
gaurav

I have also display problem, i use ibm desktop, more quite days the colour of monitor goes red. then i put some piece of paper between display jack & cpu body, then colour is ok, but when when i inserted new VGA card in mother board, when machine reboot it shows good colour of windows logos and ten the monitor display blank, i remove the VGA card, ram, cell, processor, all the cables & then restart but again no display, when i remove vga card, the monitor display no cable also blink light of monitor goes green but when i insert the wire the blink light goes yellow & one more there is no light in keyboard, when i inserted the keyboard slightly light blinks then it goes off, whereas the cpu starts smoothly.

I want XSLT do not create any output file

Similar Messages

Maybe you are looking for