I want

Hi All,
I have some java code for user defined function
i am sending 5 fields from source structure and this five fields should concatanate as a one string to target structure field.
thanks,
Anil.

Hey
no need of Java mapping,jst use Concat function of graphical mapping
as u have to concat only 5 fields,it wont make mapping that messy,but in case u have to concat lots of them,then u can go for java mapping
thanx
ahmad

Similar Messages

How can multiple users want to use airpaly to apple tv?

Our family wants to be able to share different media from our iphones/itouches through Apple TV 2. How can we do this? It seems that only one device and connect at a time. While we understand that all 4 of our devices cannot simultaneously connect and play, we would like to be able switch back and forth. We cannot. Also, when the last person to use Airplay is leaves the house or is gone (their itunes library is closed/off), others would like to access the Airplay through their device to the Apple TV 2 but more often than not we cannot seem to get the Apple TV 2 to recognize a new user. Any tips?

It's a fundamental oversight of Home Sharing - it assumes you're a single user with a single AppleID.
You can go to Setting>Computers and log out of one AppleID and change to another HomeSharing ID, but that seems a hassle.
AC

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

Want more versatility with text options

I'm new to Aperture, and I checked with the Manual but have not found what I want.
I am making a book and have many pages that have paragraphs of text describing the photos. I can change fonts, type sizes, bold, italics, etc. But I would also like to change the text inset margins of the text boxes. Another adjustment I would like to make is to add line spacing between lines of text. I would like to add a little more vertical space between paragraphs, rather than using double line returns. Perhaps I am spoiled from using the many text adjustment features of QuarkXpress to do all my text editing.
Aperture is very sophisticated when it comes to photos, but it seems to lack the same versatility when it comes to text adjustments. Perhaps those adjustments are incorporated in Aperture, but I just can't seem to locate them.
Anyone know how to handle my test adjustment requests?

I second your request for more text formatting options in Aperture (and iPhoto). I'd settle for just the formating tools in Pages. In Aperture you can at least add multiple text boxes. I guess you could create an entire page in a page layout application then save it as a JPEG file then import it into your Aperture book project. Not sure what the quality would be like though.

When adding folders to iTunes 11, they don't show up in the library. On one folder add, it created a playlist (not what I wanted). On the second folder, it shows nothing. Never seen this before. Advice?

I added my first folder of MP3s and it created a playlist, but didn't show up in the library. When adding a second folder, it didn't show up anywhere. I can do a search for them in the search window, and it finds/plays them, but I want to be able to browse them in my library. These are not MP3s downloaded from iTunes, but are personal files located on my hard drive. Can anyone help?

I have a Dell that's running Windows XP. I have found that itunes is very temperamental. this works most of the time... except on my son's computer that's running Windows Vista.
Go to your library in iTunes. Then go up to file and try one of the options (import, add folder to library, or add file to library).
Adding a folder is the least work. You can add all the files from a folder with one click... if it works. Remember that itunes is temperamental.
If that doesn't work, try adding a file. The problem with that is that you have to go through the whole process for each and every file (song, movie, etc).
Sometimes the only thing that works is to import.
I haven't gotten iTunes to work on my son's computer (Windows Vista).
I can't get support from apple in any way at all! They are good about creating electronics that appeal to us But they are lousy at support. If anyone figures out how to access support (where you can actually contact Apple) please let me know ([email protected]). I've been trying for 6 months.

TS2446 My phone want let me download apps I put the password in then it's say billing options which tell me I have invalid security code

My phone want let me download any apps when I put the password in it take me to billing option which tell me I have the wrong security code and that's the security code that was on the card on the account

iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646

Recently my phone updated itself to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want it just clicks but doesn't start to download any help?

recently my phone updated to ios 7, it wont let me sign into my iphone app store to download apps,i click on an app i want and it just clicks but doesn't start to download, i can see thats its not signed in so i tried to re set up my account under the app store in settings , but its just a grey area and wont let me click to input any information. this happened right after i updated my phone, any help?

Hi SarahHannah,
If you are having trouble activating iMessage, this article contains relevant troubleshooting steps:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Take care,
- Ari

When I login I get a message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?

Every time I login I get the message "aosnotifyd wants to use your confidential information stored in "my name" in your keychain." How do I know if it is safe to allow this? Can anyone advise please?

My immediate reaction is to deny.
Have you downloaded or installed any application that may relate to the abbreviation AOS? It may not necessarily be the application's name, could be the developer or distributor.
As it's occuring at log-in, go to System Preferences > Accounts > your account > Login Items and look for a related item. If there's one there, right-click (or ctrl click) on it and select Reveal in Finder. That will show you where the originator of the item is on your system and should give you more of a clue as to what it is.
I'd remove the item from login items anyway (highlight and click the minus sign at the bottom of the window). There shouldn't be anything trying to use your keychain info to notify anyone.

New to HD Editing and CS, building a PC to suit requirements of HD edit. Experienced help wanted :-)

Firstly let me say hi and thanks in advance to all that read and assist with my questions
A Bit about me..
I have recently acquired the need for video editing at a much higher level with both having a family now (baby daughter) and a very active hobby (rc heli flying at a sponsored level). With this in mind I bought a HD video camera some time back without the realisation that, to effectively edit such footage requires horsepower!!.... so i have saved up for a new computer and ended up here after much reading on various forums (toms hardware, video guys etc etc).
Where I am up too....
I have started by firstly implementing a NAS into my Home network which is primarily used to store and stream media (Gigabit LAN) around the home. It is setup in RAID 5 with 5 x 2TB disks (so about 7TB of storage). I have done this so there is some backup of photos, movies, home video etc (if I lose a disk , hopefully i will not lose the lot). I have also acquired adobe Premiere Pro CS 5 and now need a workstation that will allow me to edit in confort ( the one I have will not even run it!! .
My aim is to store original files and completed work on the NAS (or burn to Bluray etc).
I am looking at a PC solution, as I can obviously get more horsepower for less $$ than a laptop solution.
I have built PC's in the past but not with high frequency and this will be the biggest budget one I will have attempted. I have been researching alot over the last few weeks about sytems and components and found this forum to be very good in dealing with hardware specs and requiremnts in a very proffesional way.
I am now at the point where I getting a little muddled with which way to go and still have a lot of research to complete. My approach is to tackle each of the components needed one at a time in a fairly hierarchial manner.
What the PC will be used for..
This PC will be used primarily for the video editing and some gaming (when I have time). AlLso any other horsepower intensive apps if needed (I have a laptop and other comps for general duties).
Budget
My budget is fairly rigid at $2500 AUD (so I am not looking at a Zeon solution LOL). The budget is to include:
Case                              ?
CPU                            Intel I7 2600K (based on my research this seems to be the best way to go with my budget and needs)
CPU Cooler                  Standard Intel supplied Cooler (seems to perform reasonably well even when moderately overclocking (~4.0 - 5.0 khz)
MOBO                           ?
RAM                              ?
Graphics Card                 ?
BLURAY Writer               ?
PSU                               ?
HDD Storage               1 SSD and 3 HDD's with 2 in Raid "0"
OS                              Windows 7 64 Bit
23 inch Screen               ?
Questions
     Motherboard
I guess my issues with MOBO slection revolve firstly around which chipset to go with Z68 (newer) or the P67? It seems the Z68 is feature rich, however I also seem to feel that the Quick sync and SRT would be better disabled with what I am setting the machine up for? So therefore what advantage is there with going with Z68 if any? or am I better off getting a more established P67 chipset based board?
I also see that some boards have the Nvidia NF200 for expanding bandwidth on the restrictive 16 PCIe lanes available on the 1155 socket boards given I am only looking at one decent Graphics card is this a chip I should avoid (as I have read this can cause latency with only one graphics card)?
Another thing I have noticed is some boards have a PLX PEX8608 chip which seems to manage the limited PCIe lanes better if other cards are plugged in?
I also see some boards have the Marvell Sata 3 controller on them that does not seem to perform as well as the native Intel Sata 3 controller on the Southbridge in tests. I guess I have no real idea of when I would be looking at stretching the bandwidth and wonder whether I need to concern myself with 4 x sata 3 connections (2 intel and 2 Marvell)?
One last question I see there is now MOBO's available with PCIe 3.0 available (even though there are no devices that can utilize it) is this even worth being a consideration or is it not really of any importance to the slection process?
In summary it appears there is lots of goodies on offer with different chipsets and boards, however I do not want to waste budget on things I have no use for or gimmicks.
     CPU Cooler
It is my intent to start with the factory supplied Intel bundled cooler and invest the money not spent on this item on better graphics card etc. For moderate Overclocking it seems to perform ok.... am hoping this will be ok?
    HDD Storage
At this stage I am not up to speed with the exact storage devices I need, I am initially looking at whether my ideas for a storage system have merit? Please bear in mind I am not a CSpro user as of yet and so some of this is just based on research with no base knowledge....?
1 x ~120Gb SSD                                    for OS and Programs
1 x ??Gb/TB HDD 7200 rpm                    for Media Projects
2 x ?? Gb/TB HDD 7200 rpm in raid "0"    for Media Cache and Preview Files
Will the onboard Raid controller accommadate the above adequately?
    Graphics Card
I am looking at Nvidia as far as I can tell so that I may make use of the CUDA threads and as far as type I assume I pick the best one of the approved list (adobe approved list)? I am still confused ast to whether there is any benefit from a using a twin GPU card, its unclear to me whether the CUDA can tap into both of the GPU's on such a card? Of course budget restraint will come into play here.
     Ram
I am looking at 4 x 4gb dual channel Ram cards to give a total of 16Gb total (DDR 3) as for brands, types and frequencies I have no idea yet and need to cover off some of the above first before my research gets too wide?
     PSU and Case
I am hoping for a modular device for this, however I was thinking this and the case are a low priority at this stage (until some of the other solutions are verified).
     Blur Ray writer /reader
With me using my NAS for media streaming I will not be burngin to many Blu ray disks, however I will be reading a few so that I can upload them onto the NAS via this unit. I have no idea what is a good or bad unit or what to look for in this area?
     Monitor
I have found some cheap solutions in the 23" sizing for a main screen (~160 AUD) supported by my existing 17' monitor, however is there anything I should be looking for in particular with the monitor I choose?
I will update each section with what is decided on so that it may help others who are having the same tough decisions to make?
Even if we just tackle the Motherboard first I would be greatfull...
Thanks for reading and again all assistance is appreciated.
Regards
Jody

Ok well after much reading I have got the following as the setup that shoe horns in at $2500 ish...
Interested in thoughts for Premiere pro:
Component Model $ each Stat Ice Store
Case
UNKNOWN AT THIS STAGE BUDGET $200
Power Supply
FSP Aurum Series 750W Modular Power Supply $139.00 PCCASEGEAR
Motherboard
ASUS P8P67 Deluxe REV 3 $212.00 I-Store
Processor
Intel I7 2600k Gen 2 $324.00 All needs Computer
CPU Cooling
Thermalright Silver Arrow CPU Cooler $89.00 PCCASEGEAR
Memory
G.Skill Ripjaws X F3-12800CL8D-8GBXM (2x4GB) DDR3 $79.00 $158.00 PCCASEGEAR
OS/Programs Drive
Patriot 120G Wildfire SSD SATA3 $289.00 Umart
Capture/work Drive
2 x Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
Render to Drive
2 x Samsung SpinPoint F3 1TB HD103SJ setup in Raid "0" $54.00 $108.00 Green Box IT
Dual/Quad Head Video
Gigabyte GeForce GTX 580 Super Overclock $589.00 PCCASEGEAR
DVD-RW
LG BH12LS38 Optical Media (OEM) $68.71 Mega Buy
Operating System
Windows 7 64 Bit Pro $129.00 Umart
Monitor
Samsung S23A300B 23in Widescreen LED Monitor $149.00 Netplus $2,362.71
Total
This will be supported by a 10tb 5 disc NAS on Gigabit connection for long term secure storage.

I want to implement thems functionality in my swing application

Hi All...
I want to implement the themes object in my swing application,How ,where to start and move that functionality,If anybody use this functionality in your program experience can u share with me.
Than to Advance
ARjun...

Hi Kuldeep Chitrakar
I can do that in web intelligence. dont want that
I am replicating some of the sample report of SQL Servers in BusinessObjects XI R3.1.
One of the SQL Sever's report is of product catalogue type that gives complete information like name, category, description along with the products image etc... for each of the products.
I am trying to replicate the above said SQL Server report in Business objects XI R3.1. I am facing problem in bringing the image in to my BO report. The image resides in a table and its datatype is of varbinary(max). I don't know the exact matching while creating an object in the uiverse designer.
Here is the url link http://errorsbusinessobjectsxir3.blogspot.com/2010/10/business-objects-image-errors.html
Regards
Prasad

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

Have entrourage and want to use Mail. Can't get it to work.

I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.

check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.

How to make mac address gmail contacts overwrite the ones on my HTC Android phone - I don't want to sync - that makes the phone scramble and overwrite my computer. I want to remove or correctly overwrite the phone information as I have done with iPad.

Please help - I am beginning to hate google, my android and gmail. I have just wasted about 5 hours in a futile attempt to try and get my current Mac contacts list on my computer updated to my phone. I'm not that computer literate but I have looked up about google phone accounts, vCards, backing up contact lists, what SD on phones are, and God know what else. I have searched the internet and tried all sorts of things and I still have a mac with a now correct contact list (after the iPad contacts scrambled it and I spent ages manually correcting them all) and a phone with an outdated contact list. If you try and sync them the phone wants to overwrite the computer one just like the iPad did (would it be so **** hard to give you a choice on the phone as to which overwrites which!). After all the advice on the internet failed, I got the bright idea to completely delete all the ones on the phone and if it was empty of contacts the computer one could be exported to it. Not as simple as it sounds. First I backed up (I think) my computer contacts list. Numerous futile attempts to go through the phone options to globally delete all contacts did not work - they gave a warning message and you got to choose whether to continue or not, I did, and it looked like it might be working as it changed to zero data on the phone, but then they all popped back up again from God knows where from, but without their little added bits like pictures of the people. So, I tried un- syncing the darn phone from google and then deleting them globally. That didn't work either. I tried deleting them all again and again and google would crash and not let me do it. It is absolutely ridiculous that this is so damned difficult to do (especially if you are not computer savvy) and that you cannot choose which device overwrites which when syncing. I gave up and ticked sync with Google again (not that it appears to do anything to the phone contact list at all). So after 5 hours I am back to where I started from, with a phone showing all the same incorrect contacts (but the pictures are back), which wants to overwrite the computer if I try any sort of sync, and no way to fix them except go into each one manually and try and do it - and how long would that take (and I've already wasted hours and hours fixing scrambled contact lists!). I think I will do a print out of the computer contact list and just carry it around with me like an address book - so much bloody simpler. So now I have a headache, am fighting an overwhelming urge to hurl the phone at the wall, hoping for a heat wave to evaporate icloud things and am wishing I had bought an iPhone instead of the stupid HTC Android. Can any one offer me any suggestions on how to get rid of the contacts on my phone and replace them with the ones in my mac address list - hopefully after that they can sync to their hearts content and not stuff everything up again (which was why I unsynced google a while back - because the phone's list kept making stuff ups and scrambling and duplicating my computer contacts list). Am I the only one on the planet having this problem or is there someone else out there who has had it and solved it.

Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

I am locked out of IMAP for want of a password and I don't know what password is required.

I had an unauthorized attempt to login to my Gmail account which was blocked. Gmail wanted me to change my Google password, which I did. Gmail now works fine, but Thunderbird now asks for:
"Enter your password for -- [email protected]@imap.gmail.com:" to which I have
1. Put in the new password several times and gets rejected each time, and
2. I deleted the old password, as well as the new password, that Thunderbird recorded, several times (The only way to change a password saved by the password manager is to delete it, get prompted for the new password the next time it needs it, and then tell it again to save that password. You can delete the password using Tools -> Options -> Privacy -> Passwords -> View Saved Passwords by selecting the password and then pressing the Remove button). I have been prompted for the new
password.
I keep getting the generated tiny reply at the bottom right of my screen" Thunderbird Alert from account [email protected]: Application specific password required: http://support.google.com/accounts/bin/answer=185833 (Failure).
This question is similar to the gentleman having problems in the Uk/Carribean, but Gmail did not generate me a new password, I did.
Any new suggestions welcome!

''""Enter your password for -- [email protected]@imap.gmail.com:"" ''
on imap & smtp servers:: Change user name from [email protected] to pvedxxxxx
Try another client. Perhaps [http://www.seamonkey-project.org SeaMonkey] (requires manual configuration of accounts).
Since this is IMAP your messages are stored on the server, so the following should not cause you to loose any e-mails. Try the following as a last resort.
Delete the account from Thunderbird and then add it; starting over from scratch.

I want

Similar Messages

Maybe you are looking for