I was asked to restart FF4 in 32 bit mode from a web site and unfortunately clicked "OK", anybody know where these settings are found?
When loading a web tv snippet I got the message that Firefox needed to restart in 32 bit mode, and if I am assuming right, I need to reset at some point to 64 bit. Cannot find out how, though
go to your apps folder, then CMD+I on FF, there's a check-box for 32-bit mode.
Similar Messages
-
The settings are all correct. New machine. Only has the operating system and Firefox. No conflicting programs. It did 5 then stopped. Nothing has been added or changed since downloading FF.
Same issue here. I am '''NOT '''running in Private Browsing mode.
This may be an issue related to other add-ons, or not. I tried the remember-password bookmarklet with one site and it Worked! But when I looked in the saved passwords, the new userid and password were not there. I waited a few minutes and looked again, and mysteriously, it was there. Perhaps a caching issue. Exceptions box is empty.
I think this in an important issue that must be tracked and not assumed is always an operator-error. -
Whenever I am asked to upload an photo on my iPad
The word upload is not highlighted and I am unable to upload or attach an image ?Which os version are you using? Which browser?
Solution may be found if you search in the "More Like This" section over in the right column. -
I'm taking a class in HTML and XHTML
the coding may be complicated and difficult, but if i can see HTML coding in a Fire Fox feature I'd like to know the exact steps to get there.Right-click the web page and select '''View Page Source'''.
-
How do I restart Safari in 32 bit mode?
How do I restart Safari in 32 bit mode, to enable Cooliris?
To restart Safari in 32 bit mode locate the app in Finder, Right Click, select Get Info and in the info panel tick the box to Open in 32-bit mode.
-
after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.
My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...
-
Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password. -
Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?
yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(
-
I recently brought in a broken iPhone 4S and was told the damage was too great and therefore that is was BER and Apple would not cover the phone. I have never dealt with this issue before and was curious as to where in the terms and conditons Apple reserves the right to not cover if the think that the phone is beyond economical repair. When I asked clerk I was told that everybody knew that BER applied and "you would not expect an insurance cover to pay for a car if it was totalled." I told the gentleman in that case the BER only applies as to whether I received money for car or insurance company repaired the vehicle. When I asked to see the terms that set this out nobody in the store (or the chat support agent later). Does anybody know where this term or terms is set forth. Also, has nobody ever questioned if it is fair to sell consumers coverage for accidental damage and not tell them that only small damage is covered and not major damage? I am a little suprised unless I am missing something really obvious. I have never had this issue with Asurion or with Best Buy coverage. Thanks
You mention Apple Care, not Apple Care + which are two completely different things. Apple Care is nothing more than an additional year of standard warranty coverage. Apple Care + is what addressed accidental damage. Warranty has never covered accidental damage. What kind of damage did you do? An out of warranty replacement can be done for $199 for the iPhone 4S, and that just means you brought the phone in at least somewhat intact.
Never heard the term, but what I wrote above is what warranty is. -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I received an iTunes Gift Card as a Christmas Present in the amt of #15.00. I validated it using the code on the card on your web site and was informed I now have a $15.00 credit. I then attempt to buy music downloads and when I attempt to pay using the code on the gift card I am told it is an invalid code. Several times I have tried getting the same results. Since it was a gift I do not have a receipt or know where the card was purchased. This is very discouraging. Help please....
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of Issue. -
my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.
Who is powermac? Are they and authorized iPhone sales site?
-
This might sound stupid, but once when I was about to quit Firefox, I got the warning prompt if I wanted to close multiple tabs.. As I was going to click save and quit I accidentally pressed the "save these settings". Now I jsut wonder, how do I turn it off, so that Fireox sends the prompt whenever I try to close multiple tabs? I'm running 3.6.6 with OS X Snow Leopard.
You can reset the ''warn'' prefs on the '''about:config''' page via the right-click context menu.
browser.tabs.warnOnClose , see http://kb.mozillazine.org/About%3Aconfig_entries
browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
In Firefox 3 you do not get the "Save & Quit" pop-up dialog if you choose Firefox > Preferences > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time".
To get the "Save & Quit" pop-up dialog you have to select one of the other choices (Show my home page,Show a blank page). -
I just recently installed Firefox for the first time. It seems nice and quick. The version is reported as: "10.0.1".
I wanted to save some text from a web page, so navigated to that page, selected the text, and pressed the Control-C combination to COPY the selected text to the buffer. For example, the text I selected looked something like this:
Harry
Ron
Hermione
Hagrid
Albus
NOTE: Each line of text has a small icon to the left of the text.
It is not reasonable to COPY and PASTE each line individually, as there can be hundreds of lines of data. I recall, however, that
doing a COPY and PASTE on this data into Microsoft's Excel will produce cells which have the icons included in the cell, but unfortunately one cannot can't get rid of them! At least I've never found a way to remove them, but that's another issue. :)
Once I'd done the COPY operation I switched to a Notepad window and did a PASTE operation. To my surprise, the text from each line was duplicated. It looked like this:
Harry Harry
Ron Ron
Hermione Hermione
Hagrid Hagrid
Albus Albus
Thinking that there might be something unusual about the web page I looked at the source, but it appeared "normal" -- that is, as expected.
Note: I have done this operation several times before, and have never seen this occur before.
Note: In the actual data some of the lines have quoted text in them. Curiously there is weird behavior on these lines. In some cases the entire line is shown only once. (These occur at the top of the line, and the quoted text is at the beginning of the name.)
When quoted text appears "later" in the name, in some cases the quoted text is duplicated, and in other cases the quoted text is missing altogether! I have also noticed an error with the quoted text, and so will be reporting that to the web site which generates the HTML.
Note that each line of "text" is "anchor text", so if I click on a name the browser navigates to a page for that name.
I believe that the problem is that the COPY operating in Firefox is not simply copying the visible text, but also the ALT=
Below is a sample of what the source HTML looks like:
<a class="lnk" target="_blank" href="http://details.aspx?id=Harry">
<img width="16" height="16" alt="Harry" class="tb_icon" src="http://.../Harry.gif"/>
<span>Harry</span></a>
<br/>
(Because of the true length of the lines in the source HTML, I have stripped out the actual URL of the site.)
To make sure I wasn't imaging this difference I repeated the process within Internet Explorer. In that browser I did not get duplicated data.Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/ -
I am assuming the plugin that the Firefox message is referring to is for attaching a file to the email. I say this because at the bottom of a new email it has a link that says "Attach files more easily" which, when you click it, takes you to a setup process where you download an att updater. I ran that and it did seem to change anything. I am wondering if there is anything I can do to make Firefox handle this page without having to restart in 32-bit mode every time.
That means that you need to run Firefox in 32 bit mode if you want to use that plugin.
# Close Firefox
# Open the Applications folder in Finder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox
Maybe you are looking for
-
Real-time photo resolution info?
I had been using Quark 8 for a few months and now am back to ID CS 4. While using Quark, I noticed that when you re-size a photo by dragging its frame, Quark will tell you in real time what the effective dpi is of the current size of the photo. In ID
-
Regarding Remote function module ARCHIV_CONNECTION_INSERT
Hi All, Can any give me more detial about remote function module ARCHIV_CONNECTION_INSERT . So i have requirement that our client is archiving document from Commonstore. So want to create custom function module for TOA01 ( ZTOA01 ) and add a maintan
-
hi, I want to create new document types for purchase order and need to do field selection for that particular doucument type.. Can anyone tell what is the customizing procedure for that.? thanks in advance abi
-
Import to new Server with Standard Database Failing at 5%
Since the new database edition (basic, standard, premium) preview has gone live I have been trying to import an automatically exported bacpac onto a new server and into a Standard S1 database using the portal UI. So far every attempt has failed at ro
-
Element has secret/hidden sizes only apparent when testing or copy-pasting element.
Having difficulty describing this issue. Including a video description here: Adobe Edge Bug - YouTube Essentially, for some elements, the values listed for size are not seem accurate. However, once the timeline that the element is on plays, the value