I was charged by adobe, but cannot download or use product. There is no proof of my purchase in my profile but the money is not in my account. What is going on with this situation?
I was charged by adobe, but cannot download or use product. There is no proof of my purchase in my profile but the money is not in my account. What is going on with this situation?
Hi there
Please check that you are signing in with the same Adobe ID/email address you used to make the purchase.
If you need further assistance, please message me.
Kind regards
Bev
Similar Messages
-
My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.
Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!
-
What is going wrong with this config ??
Hello guys,
I am busting my head to find out what is going wrong with this config and cant figure it out since i am not an advanced cisco technician.
Problem is that i cant access the 94.70.142.127 server that is supposed to be in a DMZ zone.
I know it is a bit chaotic but would really appreciate any help since i am running on a deadline.
I am building the config step by step and although it seems to be working access to the server all of the sudden is denied.
No idea if its a NAT issue a firewall issue or a security audit issue.
There are 3 vlans.
Vlan 1 is the inside network.
Vlan 2 is the DMZ server
Vlan 3 is the Management Network.
thanks in advance
Building configuration...
Current configuration : 11796 bytes
! Last configuration change at 11:28:33 PCTime Fri Jan 4 2013 by admin
! NVRAM config last updated at 11:27:51 PCTime Fri Jan 4 2013 by admin
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
hostname R1
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 8
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$oT7y$BwhdEjMJfAaTQI3dzDVwP.
no aaa new-model
memory-size iomem 10
clock timezone PCTime 2
clock summer-time PCTime date Mar 30 2003 3:00 Oct 26 2003 4:00
crypto pki trustpoint TP-self-signed-2567543707
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2567543707
revocation-check none
rsakeypair TP-self-signed-2567543707
crypto pki certificate chain TP-self-signed-2567543707
certificate self-signed 01
30820244 308201AD A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32353637 35343337 3037301E 170D3133 30313032 30383431
35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 35363735
34333730 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100ABA4 B7FFF4F1 9FBE79D8 2CEBCA68 A14BE3AB DBF770C2 EB35A954 B271AE3E
F8485837 F2E8566B 66E5EF6B BCFCDFA3 8F6F91F3 FD8E3015 879A67F5 85DD95F5
C26875C0 2202CA6C CE95888F 545AB4F6 6F708A0E C65E78D1 60967480 5589F5EE
80505E46 8767CE2C 37C994FE AB555AF0 BA4C4679 63FF7641 34FFF6EF 3EC38006
46B90203 010001A3 6C306A30 0F060355 1D130101 FF040530 030101FF 30170603
551D1104 10300E82 0C52312E 646F636E 65742E67 72301F06 03551D23 04183016
8014F0DE 85318FB3 70C36B4A FEB4B0CA 446025F0 329C301D 0603551D 0E041604
14F0DE85 318FB370 C36B4AFE B4B0CA44 6025F032 9C300D06 092A8648 86F70D01
01040500 03818100 5D76D5F4 5FB659C3 1E5B3777 420E1703 CD019889 AE79390D
A2AA4D26 AD9913B4 B3292277 97ACACDD D7093465 78279B4D 5FAC0A21 EFBF3B74
6A25BC5B ACFB648F 08F92678 00BB495C 037DEAF7 C5910944 3D2C0643 EA19E9BD
0AFE5423 AADBB3C2 B2C94296 DABE0D3D 6438F7A8 32B0A92B 3E8E0D26 635070A3
ACF87E49 65A9E468
quit
no ip source-route
ip cef
no ip bootp server
ip domain name docnet.gr
ip name-server 195.170.0.1
no ipv6 cef
username admin privilege 15 view root secret 5 $1$Lny5$et1FhWOpIKOOYRUtN89H10
archive
log config
hidekeys
ip tcp synwait-time 10
ip ssh version 2
class-map type inspect match-any WebService
match protocol http
match protocol https
class-map type inspect match-all sdm-cls-sdm-pol-NATOutsideToInside-1-1
match class-map WebService
match access-group name WebServer
class-map type inspect match-all ccp-cls-sdm-pol-NATOutsideToInside-1-1
match access-group name Spoofing
class-map type inspect match-any CCP-Voice-permit
match protocol h323
match protocol skinny
match protocol sip
class-map type inspect match-any tcp-udp
match protocol http
match protocol https
match protocol dns
match protocol icmp
class-map type inspect match-all ccp-cls--3
match access-group name mng-out
match class-map tcp-udp
class-map type inspect match-all ccp-cls--2
match access-group name mng-self
class-map type inspect match-all ccp-cls--4
match access-group name mng-out-drop
class-map type inspect match-any ccp-cls-insp-traffic
match protocol cuseeme
match protocol dns
match protocol ftp
match protocol h323
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp extended
match protocol sql-net
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-any http-https-DMZ
match protocol http
match protocol https
class-map type inspect match-all sdm-cls--2
match class-map http-https-DMZ
match access-group name web_server
class-map type inspect match-any MySQLService
match protocol mysql
class-map type inspect match-all sdm-cls--1
match class-map MySQLService
match access-group name DMZtoMySQL
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-all sdm-nat-https-1
match access-group 102
match protocol https
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect sdm-pol-NATOutsideToInside-1
class type inspect ccp-cls-sdm-pol-NATOutsideToInside-1-1
drop
class type inspect sdm-cls-sdm-pol-NATOutsideToInside-1-1
inspect
class type inspect sdm-nat-https-1
inspect
class class-default
drop
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-insp-traffic
inspect
class type inspect CCP-Voice-permit
inspect
class class-default
drop
policy-map type inspect ccp-permit
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--1
class type inspect sdm-cls--1
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--1
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--3
class type inspect ccp-cls--3
inspect
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--2
class type inspect sdm-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--5
class class-default
drop
zone security out-zone
zone security in-zone
zone security dmz-zone
zone security mng
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security sdm-zp-NATOutsideToInside-1 source out-zone destination in-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security zp-dmz-to-outside source dmz-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security zp-outside-to-dmz source out-zone destination dmz-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security sdm-zp-dmz-zone-in-zone source dmz-zone destination in-zone
service-policy type inspect sdm-policy-sdm-cls--1
zone-pair security sdm-zp-in-zone-dmz-zone source in-zone destination dmz-zone
service-policy type inspect sdm-policy-sdm-cls--2
zone-pair security sdm-zp-dmz-zone-self source dmz-zone destination self
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-mng-self source mng destination self
service-policy type inspect ccp-policy-ccp-cls--2
zone-pair security sdm-zp-mng-out-zone source mng destination out-zone
service-policy type inspect ccp-policy-ccp-cls--3
zone-pair security sdm-zp-out-zone-mng source out-zone destination mng
service-policy type inspect ccp-policy-ccp-cls--5
interface Null0
no ip unreachables
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
encapsulation hdlc
shutdown
isdn termination multidrop
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
switchport access vlan 3
spanning-tree portfast
interface FastEthernet3
switchport access vlan 2
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security in-zone
ip tcp adjust-mss 1412
interface Vlan2
description $FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security dmz-zone
interface Vlan3
description $FW_INSIDE$
ip address 10.0.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security mng
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly max-reassemblies 64
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 0918425001505245
ppp pap sent-username [email protected] password 7 13511B4B1359417D
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.0.10.0 255.255.255.0 Vlan3
no ip http server
ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static 192.168.0.101 94.70.142.113
ip nat inside source static 192.168.1.102 94.70.142.127
ip access-list extended DMZtoMySQL
remark CCP_ACL Category=128
permit ip host 192.168.1.102 host 192.168.0.101
ip access-list extended Spoofing
remark CCP_ACL Category=128
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
permit ip 172.16.0.0 0.15.255.255 any
ip access-list extended VTY_incoming
remark CCP_ACL Category=1
permit ip host 10.0.10.2 any
ip access-list extended WebServer
remark CCP_ACL Category=128
permit ip any host 192.168.1.102
ip access-list extended mng-out
remark CCP_ACL Category=128
permit ip 10.0.10.0 0.0.0.255 any
ip access-list extended mng-out-drop
remark CCP_ACL Category=128
permit ip any any
ip access-list extended mng-self
remark CCP_ACL Category=128
permit ip any any
ip access-list extended web_server
remark CCP_ACL Category=128
permit ip 192.168.0.0 0.0.0.255 host 192.168.1.102
logging 10.0.10.2
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 remark VLan 1 Access
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 remark VLan 3 Access
access-list 1 permit 10.0.10.0 0.0.0.255
access-list 1 remark Vlan 2 Access
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 102 remark CCP_ACL Category=0
access-list 102 permit ip any host 192.168.0.101
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner login ^CWARNING!!!This is a highly monitored private system. Access is prohibited!!^C
line con 0
no modem enable
line aux 0
line vty 0 4
access-class VTY_incoming in
password 7 12292504011C5C162E
login local
transport input ssh
scheduler max-task-time 5000
ntp authentication-key 1 md5 10603D29214711255F106B2677 7
ntp authenticate
ntp trusted-key 1
ntp master 2
endHello karolos,
Here is the thing.
You said you are trying to access 94.70.142.113 and that is a server on the DMZ but based in your configuration that is not true
ip nat inside source static 192.168.0.101 94.70.142.113
So 192.168.0.101 is on Vlan 1 witch is the in-zone
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
security in-zone
If you got confused with the security zone that the host is assigned to then just add the following and it should work
ip access-list extended WebServer
permit ip any host 192.168.0.101
Regards -
EE What is going on with this outage? This is on a national level 27.07.15
HI,There needs to be an answer from EE what the hell is going on with this national outage? its been down roughly since midnight (27/07/15).This is not good enough from a mobile network provider, and to make things worse you have no way of communicating this issue to your customers.
Just because you aren't affected, doesn't mean there isn't a problem?
My wife and I have a shared account, mine doesn't work, hers goes. This has been a problem since Friday for me. 2nd Line have acknowledged an issue. After an update they pushed on Friday to an undisclosed amount of users on the network. I can't dial 150 from a PAYG or a colleagues PAYM phone. See the other thread, posted into.
Coincidence?
The issue is with No Service displayed on phone, a sim registration issue. Not no signal or other (though may be interpreted as no signal to the layman). -
I want to download pictures/videos from my Apple iPod onto my Dell laptop computer, but cannot. Is there a device I need to purchase in order to make this operation possible?
For photos/videos taken by or saved to the iPod:
iOS: Importing personal photos and videos from iOS devices to your computer -
I have some music videos on my i-pad. when I play one, the music plays but the video does not. I go under "music video" play list select and play, i get music but no video. Can someone be so kind as to help me. this problem just started today.
Thanks Johnathan for trying to assist. I purchased these music videos from i-tunes, in the past I just had to go into "Music" on the I-pad and select "music videos" then the one I wanted to play and it would just start playing with video. I don't see any "VIDEO" app. These music videos was downloaded from i-tunes and shold play through the i-pad music app. Any further suggestion?
-
I bought this iPod mid-March, I've only had it for a little less than 5 months. I bought it at Best Buy, I don't know if that matters or anything- I have a geek squad and apple warranty. I'm only nineteen years old and this was my first real big purchase and I'm very disappointed. I've had other iPods before and never had any issues with them, my last one lasted from 2008 - 2013. I take very good care of my iPod Touch, never dropped it or anything of the sort and I keep it in a thick case. This iPod worked fine up until recently. First the home button became unresponsive, I had to activate the assistive touch because I use this iPod for school work. I was about to take my iPod into Best Buy so they could take a look at it and see if there was anything they could do before I contacted apple, but now my iPod is completely dead. It won't respond at all. I had to disconnect the charger because the iPod screen was getting hot and it wasn't charging. It's been disconnected for a few hours and the screen still feels hot. I'm really concerned, especially with recent news reports of handheld devices overheating and burning people or even exploding. Will the apple warranty cover this so I can get a new iPod? What are my options?
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I would appreciate if someone can help me. Best,
AGIWindows: http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac: http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
What's going on with this site
Hi,
I've made this page for a client some time ago
http://munck-feldthusen.dk/
and it works just fine.
Today I got a call from him saying that he bought another
name... this
one
http://www.glarmesterservice.dk/
which he asked his host to point to
the original URL (
http://munck-feldthusen.dk/)
and it does. But when I
look at the page it's like things are not working and the
source shows
me a frame!
I would appreciate if anyone can tell me what's going on... ?
I've nothing to do with the extra domain name, the forwarding
etc...
just trying to come up with an explanation.
Kim
http://www.geekministry.comIt's how hosts do such things sometimes -
<frameset rows="100%" border="0" frameborder="0"
framespacing="0"
framecolor="#000000">
<frame src="
http://www.munck-feldthusen.dk"
name="framenavn">
</frameset><noframes><h1>glarmesterservice.dk</h1></noframes>
Are both sites on the same host?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"kim" <[email protected]> wrote in message
news:fr3tv4$l7h$[email protected]..
> Hi,
>
> I've made this page for a client some time ago
http://munck-feldthusen.dk/
> and it works just fine.
>
> Today I got a call from him saying that he bought
another name... this one
>
http://www.glarmesterservice.dk/
which he asked his host to point to the
> original URL (
http://munck-feldthusen.dk/)
and it does. But when I look at
> the page it's like things are not working and the source
shows me a frame!
>
> I would appreciate if anyone can tell me what's going
on... ?
>
> I've nothing to do with the extra domain name, the
forwarding etc... just
> trying to come up with an explanation.
>
> --
> Kim
> ---------------------------
>
http://www.geekministry.com
> -
What's going on with this Illustrator CC 2014.1 layer thing?
Used it for couple days until I tried to work on layers and realized it looks like this:
It doesn't show the layer contents, and if I create a new layer from the info dropdown (there is no control buttons either), it will literally becomes "2 layers" and don't show any contents. Is this an error or is something I didn't turn on?
Here is the "2 layers" imageadayday,
It may be time for the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
HELLO. I WAS ALMOST FORCED TO UPGRADE TO MAVERICK BUT I SHOULD HAVE KNOWN BETTER. AFTER LOSING THE MOST IMPORTANT THING""FRONT ROW"' NOW I CANNOT TYPE INTO MY EMAIL FIELD WITHOUT DOWNLOADING 100 OTHER BROWSERS. THIS IS APPLES PROBLEM AND I SAY YOU SHOULD FIX IT. I DON;T HAVE ANOTHER $3,000.00 TO GO AND PURCHASE ANOTHER COMPUTER. I AM 60 AND I'VE GOT ONE FOOT IN THE GRAVE. I WANT TO HAVE A LITTLE FUN BEFORE I DIE. PLEASE APPLE GET THIS FIXED!!!!! CHETZ..THANX
easy there chetz
First -- TAKE THE CAPSLOCK OFF -- above the Shift key on the left
Now - let's get some pertinent info we need to help you better...
"Keep It Short and Simple" - Take your time... but Be Specific
What exactly are you trying to do when you are overwhelmed?
What exactly happens when you do it?
In your frustration and excitement, your question came out as PANIC! Just relax and take it a step at a time.
CCC -
Can anyone explain what's going on with this dual 2.0 G5???
I've been trouble shooting my PowerMac G5 dual 2.0 recently. I've gotten to the point where I think it's the processors. I was getting random freezing and Kernel Panics so I bought a set of used 2.0 CPUs (U1 and U2)in unknown working condition. Well, I took out the original CPU (O1) that I though was causing the trouble and replaced it with one of the untested ones (U1).Everything worked great except that the computer only recognized one CPU (don't know which one). Swapped out U1 for U2 and again it powered right up but froze after a few minutes. So I replaced U2 with U1 and went about using it as a single G5.
I later aquired a 100% tested and working 2.0 CPU (T1) and popped it in with O1. I got nothing. No chime or start up. I switched their positions and got as far as trying to calibrate the fans only to repeatedly get an error saying the processor was bad.
After this I tried something I hadn't thought of before. I put U1 and U2 together and to my surprise, the computer started. It was working with both CPUs once again. The only thing I noticed was that CPU A's temp was about 103 degrees F and CPU B's was 118 F. There was always about a 15 degree difference. The computer ran fine for a while so I opened 6 full length movies in Quicktime to stress the CPUs. After a few minutes of running and expose work, the computer froze. I didn't see what the temps were when it froze, I just did a hard shutdown and left it off.
My point is, I'm starting to wonder if it's the logic board and not the CPUs. Both O1 and O2 work together and are recognized as dual, but the computer will freeze. O1 and U1 work together but are recognized as a single 2.0 G5. U1 and U2 work together and are recognized as dual but, again, the computer froze. I couldn't get T1 to even register, but I've been told Rev A and Rev B CPUs cannot be mixed so maybe that's why.
Does anyone have any ideas? Two (or more) heads are better than one and I'd love to figure this out. I hope this doesn't sound too confusing. I'll give any additional info if needed. Thanks in advance.
Message was edited by: fiveinchwrenchHey DaddyPaycheck and Japamac,
Thanks both for your replies.
+You are a tenacious one, that's for sure! :-)+
I don't know if that's a good thing in this case.....;)
I do agree with the statement that it cannot handle dual processors. I swapped the the "original" working CPU with the "original" one I thought was giving me problems. It is now running (although showing as single) with the CPU I thought was bad. Both sets, original and untested, will work together and register as dual, but will be unreliable and randomly freeze.
+The defining bit of data would be if you could determine that one socket or the other is continually working, or if one is sporadic (thus explaining the occurrence of the pair working).+
I'm having trouble narrowing down that part. I can swap them back and forth and get the same result-so both sockets seem to be working. But like I said when both pairs are couple together, it shows as dual, and it works for a certain amount of time. So I know they are working to a certain degree. But when they're mixed, only one (don't know which one) is being seen.
Yes, I've run thermal calibration and everything goes fine. Even with the diagnostic disc, when the CPUs are mixed, hardware specs show one CPU. But when the original pairs are coupled, it will show both.
This is like a splinter that I can't get out. It runs great as one CPU, and I could let it go like that, but knowing that it could (and should) be dual is driving me nuts.
Is there anything either of you can think of that I can try?
Message was edited by: fiveinchwrench -
What's Going On With This Forum? Posted comments wait for a moderator
They wait, and wait, and wait, and wait.
Whose policy is this to screen everything before allowing posts to show up? Is that a Toshiba policy? What is Toshiba afraid of? If this is a Toshiba policy, I object. I object very strongly. Strongly enough that I'm just about tempted to pack up the mini notebook and ship it back to B&H and buy a different brand where the manufactor doesn't censor the support forum.
Let's see if this shows up.Hello Edmund
To be honest I don't understand your question. As I can see you have posted 40 times until now.
Be honest and tell us how often you saw message like this:
*Please note, your reply will need to be approved by a moderator before it is posted in the forum.*
Probably first time now. I have noticed that sometimes forum is closed for postings but there must be some reason why moderator do this. At the moment you can write what you want.
There is no reason for panic or comments about Toshiba policy.
Every serious forum has own policy and this forum is more than serious. Isnt it?
So it is nothing unusual and it can be done due to some technical or any other reason.
Look a little bit what people write here and you will find very critical postings but nothing is blocked or edited by Toshiba so I think this forum is free and democratic. Your posting is also published.
In my opinion it is the best evidence that your critic and opinion about this forum and Toshiba forum policy is completely unjustified. Do you agree with me?
Good luck! -
What is going on with this cycle count business?
I just bought my first Mac, a 13-inch Macbook Pro, about a month ago. I started learning about the cycle count and seeing where my computer stood. This morning, while unplugged from the charger, my cycle count was at 16. High, I thought, since I was under the impression that it was a full charge followed by a full discharge that registered each cycle count. I haven't used it but for maybe 20 hours of total time, so I found this to be strange.
The real problem though was when I just checked it. It's been off the charger since this morning and has dropped from about 74% when I cracked it this morning to 33% now, and it's now telling me that the cycle count is 20... 4 more cycles after just using 40% of the battery? Is this normal?
It also says the battery health is at 96%. I just find this to be quite a degredation after a couple of hours of use a week for a month.Hi m,
I would contact Apple. You have 90 days of free AppleCare phone support. -
Dunno what's going on with this trigger
I created the following trigger:
CREATE OR REPLACE TRIGGER common.auto_entity_types_type_id
BEFORE INSERT ON common.ENTITY_TYPES
FOR EACH ROW
begin
if :old.type_id > 0 THEN
null;
else
select SEQ_ENTITY_TYPES_TYPE_ID.nextval
into :new.type_id
from dual;
end if;
:new.type_fkey_id := :old.type_id; -- debug
end;
it compiles OK with no warnings.
It works as expected when I don't suppy a number to type_id column. If I supply a number on insert, the query doesn't come back.
I'm trying to create an auto-number feature that can be overridden. kinda like the following PostgreSQL DDL (does not work in oracle since aracle will not allow anything non-deterministic in the DEFAULT clause). Arrgggh!
CREATE table pg_rules_ok (
id int default nextval('seq_name') primary key
This only auto-implements the sequence when a value is not supplied. I want the developer to be able to select a value from a sequence manually and then use it for any number of subsequent operations without having to use transaction locking to prevent a race condition as a result of the ol' INSERT, then SELECT max(id) bodge.
Any assistance would be appreciated.You were close, you just needed to reference .new instead of .old:
sql>create table seq_test (pk int, name varchar2(10));
Table created.
sql>create sequence seq;
Sequence created.
sql>create or replace trigger seq_test_trg
2 before insert on seq_test
3 for each row
4 when (new.pk is null)
5 begin
6 select seq.nextval
7 into :new.pk
8 from dual;
9 end;
10 /
Trigger created.
sql>insert into seq_test (name) values ('Test');
1 row created.
sql>select * from seq_test;
PK NAME
1 Test
1 row selected.
sql>insert into seq_test (name) values ('Tester');
1 row created.
sql>select * from seq_test;
PK NAME
1 Test
2 Tester
2 rows selected.
sql>insert into seq_test (pk, name) values (99, 'Supplied');
1 row created.
sql>select * from seq_test;
PK NAME
1 Test
2 Tester
99 Supplied
3 rows selected.
Maybe you are looking for
-
Transfer from iPod to New Computer
I use my iPod to listen to recordings of lectures. I do the recording using a digital recorder, then download to the PC and import into iTunes then sync to iPod. Recently my PC crashed and the hard disk is no longer recognized. I will have to buy a n
-
ITunes randomly linking to non-song files... a real curve-ball of an issue
I have been having problems with songs in my iTunes library suddenly not playing. When I select "Reveal in Finder" the file that it revealed is often a driver in my library - worse still, the song is then no-where to be found using spot-light but it
-
Since a FF8 update, all bookmarks were lost and none of the recommended restore methods work, even though I have been able to find the backup ".json" files; I continually get "Unable to process the backup file" for all methods of importing or restori
-
Hi, I am planning to clone from a multi tier( db+car==>1 and web+forms==>2 ) to single tier. Which application folders (appl_top,comn_top etc) should I copy? Shall I copy both or only one will do?
-
Stream page docs wirelessly with macbook pro
How can I stream page docs or keynote presentations wirelessly to an overhead projector??