I was copying a movie project to my hard drive from and external and I received a notice that it wasunable to do so due to my time machine being too full. Now when going to time machine, I am only able to go back in time 3 days?? Why? JMB
Not sure where my old backs up went, in time machine. I am only now able to see 3 days ago? Did it delete any old stuff after it gave me a message when I was attempting to download a movie project to my hard drive, and it told me that I was out of space? Is there any way now to go back in time? JMB
See Pondini's TM FAQs for starters.
Similar Messages
-
I am looking for anyone in the west Tennessee area using Wild Blue along with Apple IMac who is having a problem with their screen going complelely white every so often. Have had the maching into the Apple store in Memphis. They could not get it to fail. Help
TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams -
I copied my Itunes library to my laptop hard drive from an external drive, I now have dual entries in Itunes. How do I remove dual song entries?
iTunes will run fine with the media on an external drive.
However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
http://support.apple.com/kb/HT1364 -
Access Time Capsule's Hard Drive from Windows Vista
Hi, I have a Time Capsule connected to my network.... It works beautifully with with my Mac mini and Macbook Pro on wired and wireless... I can easily connect to TC's hard drive and share files between the two.... I was wondering if I can access the hard drive from my Windows Vista PC that is also connected... I tried to access (The device is classified as unknown by windows) it but it I get an error message (the properties cannot not be found) from the network setup center ... Is there an easy way so I can access TC hard drive from my PC???? Thanks...
I don;t know about Vista, but I have no trouble with the several flavors of XP that are in the house.
In the Airport Utility _> Manual Setup -> Disks ->File Sharing, I have entered the Workgroup name that is used by the Windows machines, and the Time Capsule password is the same as that of the Admin user on the XP machines.
If you haven't set the workgroup maybe that will help. -
Trouble with slow Macbook Air. I have first generation MacBook Air and have a hard time keeping hard drive from being full. After trashing many docs, I have almost 5 gigs available, but mac is slow and I keep getting color wheel when I use Mail. I'd like to install Lion, but now I'm afraid it will slow down my machine even further. Do I have enough free hard disc space? Is Mail problem related to free hard disc space? Thanks for your help!
7gb of free disc space is required to install Lion. Read this about how to free up disc space: http://pondini.org/OSX/DiskSpace.html. Also, advice on how to speed up your mac: http://www.maclife.com/article/feature/25_ways_speed_your_mac
-
After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?
The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication. -
I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.
You can download Creative Suite 5 here:
Other downloads
To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
Adobe ID, sign in, and account help
See the bottom of the page for a link -
I recently had a catastrophic hard drive failure and had to replace it. At the time, I had a VERY extensive music library and it is now lost. This entire library was also on iTunes. Is it possible to recover that library, or do I have to download again?
If your hard drive was not backed up then you can download items purchased from the iTunes Store.
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Did you subscribe to iTunes Match service? If you did, your other music would be available too.
Note, this restores the music files themselves, not playlists, playcount, ratings, or other things associated with the actual library file structure.
You really should consider getting a backup drive. Hard drives failures are a certainty and it saves a lot of grief. -
How to backup external hard drive to another external hard drive using time machine ?
Hello,
i have an external hard drive which i store all my drum samples and sound library on and files are contantly changing, adding new sounds, deleting old ones etc ..
So my method of back up as of now is to just copy all the edited files and click and drag to the back up disk.
Now, my question is, how do i back up my external hard drive to another external hard drive using time machine ? I read somewhere that you can do this, i cant find the post however. It would be nice to automate the back up process rather than manually finding the files to copy over.
Thanks in advance !The question you pose is conditional, in that you should have more than an exact
capacity replacement for a clone, if the drive you are going from (or one going to)
has insufficient free space and that has a bootable clone on the drive; any space
tied up in a partition for Time Machine backup, takes away from the running space
if you should need to run the computer from a clone on the external HDD's other
partition.... Better to have a good capacity of additional reserve unused free space.
Be sure any clone copy that you hope to use as a re-close, that each in turn is tested
after a clone operation. Also consider using each running system's Disk utility and
have First Aid 'repair disk permissions'. Preparation of a new drive or even an old
drive that may have questionable artifacts or errors on it, should be reformatted. To
even go as far as Secure Erase (overwrite) at least one-pass before reformatting it
again, could help.
However, I'm not sure if the drives and situation you are looking at would necessarily
be a good match. It could work, but you'd need a reasonable size partition or hard
disk drive for a system. Snow Leopard and all its associated applications, can do
OK in a 100GB HDD. (My computers have more storage capacity than is used; so
for mine to have 60% free space, is good.) Virtual Memory is drive space used by
OS X, that can be a substantial amount for swap and temp files. Some applications
make duplicates of works-in-progress, for each change in an open file; that adds up.
{This question (& my reply) should've been in their own thread & not at the end
of one that is nearly three months old, + marked 'solved' by the original poster.}
So I guess I don't have a direct answer to your question; having just returned from
a few hundred miles and automobile issues, too. I'm not really thinking on-topic...
The clone should be on its own separate drive, and up to 3TB drive dedicated to
Time Machine may be overkill, however that software will consume old backups first
when it uses up all the space. Or usually that is what happens in TM backups. If
that isn't happening, there may an issue in how Time Machine is set up.
Good luck & happy computing! -
HT1553 I restored my hard drive from time machine. Why is iPhoto not displaying images properly?
I restored my hard drive from time machine after power blinks corrupted the file system so badly that disk utility could not repair it. Since then, iPhoto has not displayed images correctly. Events are there, and blank squares are shown, but that's all. I rebuilt small and all thumbnails and permissions -- I think the top three or four options in the iPhoto rebuild utility, which took five hours to do but which seems not to have changed anything. The iPhoto library is still more than 100GB, so the photos are there. I didn't choose rebuild from backed up --- whatever the final option on the rebuild menu offers -- because that seems to be appropriate only when a backup is interrupted. Could certainly do it, though. How do I get iphoto behaving again? I have full time machine backups saved automatically and another fairly recent copy on a separate hard drive stored remotely. Thanks for whatever help anyone can provide. I've looked at existing questions and solutions without success so far.
What version of iPhoto and system are your running? Since you've tried rebuilding with iPhoto give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If you have an external HD you might want to have the rebuilt copy created on it unless you have well more than 100 GB available on your boot drive.
OT -
I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
BobBob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR -
I had my hard drive replaced and since my Time Machine backups say failed
I had my hard drive replace and since my Time Capsule backups are failing. The exact message is:
The backup was not performed because an error occurred while copying files to the backup disk.
The problem may be temporary. Try again later to back up. If the problem persists, use disk utility to repair your backup disk.No, replacing your hard drive has nothing to do with it. There is a problem with your backup drive. As far as Time Machine is concerned replacing a drive is no different than buying a new computer. Time Machine will need to make a brand new backup from scratch.
If you have a large enough backup drive this may not be a problem. Otherwise, you may not have sufficient space to maintain a new backup and keep the old one. So, I would suggest under the circumstances that you erase your backup drive, then start a new Time Machine backup from scratch.
Drive Erase
1. Open Disk Utility in your Utilities folder.
2. After Disk Utility loads select the volume you wish to format from the left side list. Click on the Erase tab in the Disk Utility main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
For additional help with Time Machine: Visit Pondini's Time Machine FAQ for help with all things Time Machine. -
How do I move all files from one project, to another hard drive?
I am using CS3- I created a project on one hard drive, began editing, etc.- but now I'd like to move that project to another hard drive.
Where are all of the files associated with it so I can move it successfully?
Thanks!You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
Can't restore new hard drive from time machine back up
Looking for some help on this one....
Briefly: iMac 24" aluminium early 2008 (model 2134) trying to upgrade the original 320 gb HDD. So I bought a WD Caviar Black 64 mb, 6gb/s 1Tb drive, intalled it pretty smoothly and then using an install disc restored it from a time machine back up. That went fine then I could not restart the mac (kernel panic). So i trouble shooted with an extended hardware test, disk repair and everything seemed fine. I reinstalled my old HDD again and worked perfectly so I figured my iMac doesn't like this Caviar (due to sata3 perhaps??) so I went and bought a Seagate barracuda sata2 1 TB 7200 rpm and repated the whole process. Again everything went super smooth until the restoring process ended and the iMac was restarted. Kernel panic again. Already tried PRAM, option key. Booting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Any thoughts ???
ThanksBooting from the CD or my old drive is not a problem at all but from the newly installed drive (x2) ... Impossible
Disconnect all peripherals from your computer except for the keyboard and mouse. Double check to make sure that you installed the hard drive correctly - http://www.ifixit.com/Guide/Browse/iMac#SectioniMac_Num20
Select your imac then select hard drive replacement, and there are the instructions.
Video instructions - http://www.youtube.com/watch?v=QzuBW3mu7LI and http://www.youtube.com/watch?v=EVzYXgUhygI
Maybe you are looking for
-
How can I move some track from music folder to the podcast or audiobook?
I have a lot of audiobook in my hard drive.When I add these files to library,they place in the music section.How can I move Them to the audiobook section? I've tried to chenge their genre to the Podcasts or Books,but there is nothing happened.
-
Analysis Services Execute DDL Task Internal error
Hi all, I need help in solving this sporadic problem... the dimension below (blanked out as xxxx) is based on a view. The cube processes fine many times - but fails - abruptly once a week... it's being called from a sql job. Any ideas? Thanks in a
-
Dear all, I have an AE base station that is used to provide network access for a number of machines, most on AE cards, but one (G4 733mhz) has an original airport card. Until recently, I have had security set to 40 bit WEP, not wonderful I know, but
-
Dear All, Required BAPI which shows the status of Open Deliveries, whose shipment is not done. Pls help on this Regards Ranjit...
-
Urgent !! Help me to update firmware Nokia E63 (my...
My phone is Nokia E63. How to update firmware (offline) ? Coz my computer doesn't has internet connection ! Or, how to update firmware from my phone instead ??? Thank you.