I was filing TAX thru TurboTax. While filing TurboTAx changed full amount which wen to iTunes but TurboTax app says "payment didn't go thru'. TurboTax suggest to contact iTunes Support to dismiss purchase or fix the problem.

I was filing TAX thru TurboTax. While filing TurboTAx changed full amount which wen to iTunes but TurboTax app says “payment didn’t go thru’. TurboTax suggest to contact iTunes Support to dismiss purchase or fix the problem.

you have paid for app and when app purchase will be approved then ony you should able to make payment for your TAX.
I had same problem. I called apple guys and got my money back than I use web version ofn turbo tax.
that works perfectly well.
problme with app is that you can not see your tax paper next year as web and app does not have any sync link.
use web version.

Similar Messages

  • I have error code 2330 when i tried to download itunes 10.5, how do I fix the problem?

    I have error code 2330 when I tried to download itunes 10.5. Different sites I have visited give different solutions and most seem to indicate removing the current itunes program then reinstalling the new 10.5. I did try to remove the program but it took a long time and I had to reboot the computer. Has anyone had the same issue and how did they fix the problem?

    I was having this problem with my wife's computer today so I did a Check Disk from the command prompt. (start/run then type chkdsk) let it do its thing then restart windows and it does some other BS on the start up. Relaunch itunes and then retry to download. I went to the apple website and click on the download and saved the file to my desk top then ran it from there. Let me know if you have the same luck. -Mike

  • Secure link to iTunes failed. How can I fix the problem?

    Secure link to iTunes store failed. How can I fix the problem?

    Try resetting the iPod. Nothing is lost and it cures many ills.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • When I type .ssh root@10.0.02 it says host not recognized I'm unable to get in to known host file can not fix the problem.

    When I open terminal and do sash [email protected] it says warning rsa key not recognized to go to known-hosts file which ican not grt into I have download pico but am not sure how to launch it or what I ave to do.

    sibeen, please stop starting new posts when you are really just continuing the first post.  "Reply" to one of your existing posts when you are really just continuing the same question.  If I have not lost count, you have posted 3 times about this same ssh rsa host key issue, and Linc Davis and I have been trying to keep track of all the details, but with it spread out across multiple new posts, it is difficult.
    I'm guessing as you again forgot to post the actual error (I'm starting to wonder if you are testing how well Linc and I can guess at your problem ).  Anyway, I'm guessing that you managed to delete the $HOME/.ssh/known_hosts file, and now when you try to ssh to 10.0.0.2 it wants to add the remote system's host rsa key into a newly created known_hosts file.
    The authenticity of host '[10.0.0.2]:22([10.0.0.2]:22)' can't be established.
    RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
    Are you sure you want to continue connecting (yes/no)?
    Generally the command ask if you want to do this, yes or no.  You type "yes" and your Mac memorizes the remote system's host rsa key.
    If this is not the warning message you are seeing, then as Linc has requested, please post the exact error (feel free to mask put the actual key or usernames or IP addresses, but keep the words.
    If you are still getting the original error from 3 posts ago, then I would not try editing $HOME/.ssh/known_hosts, and instead just delete the file, and when you get a message like I have posted above, answer it with "yes".
    WIth respect to pico, Mac OS X already has pico installed, so there was  no need to download it from anywhere.  However, most people just use 'nano' which has essentially replaced 'pico' as an easy to use Terminal based text editor.  But like I said, I think you will be happier if you just delete the known_hosts file and get on with your ssh operations.
    Finally, I think in your 2nd post you indicated you tried deleting a file that had a dash in the name (known-hosts) instead of an underscore (known_hosts).  If that was just a typo when you entered your post, and you were really getting you cannot delete a directory, then something is seriously wrong, or you accidentally allowed a space to be inserted between .ssh and known_hosts.  Personally, I'm going with you actually entered a space and the 'rm' command thought you wanted to delete the .ssh directory instead of $HOME/.ssh/known_hosts.  I could be wrong, but using copy and paste to post actual Terminal screen output as well as the command you entered would be very helpful to anyone trying to provide useful information.  In other words, help us help you.

  • HT1386 Recently Itunes updated on my computer and I have not been able to sync to my Iphone 4 since. Anyone else have this problem? I even uninstalled and re-installed Itunes and it still did not fix the problem.

    I cant figure out how to fix this, I cannot add or delete songs from  my Iphone. hellllp

    If your iPhone no longer recognized by iTunes - not available under Devices in the iTunes source list when connected, check this link.
    http://support.apple.com/kb/TS1538

  • ITunes 7.0.1 Did not fix the problem with registering modules. Any ideas? T

    Dell desktop   Windows XP Pro  

    I have reported this problem several times and no word back from Apple. Don't they monitor these boards or are they too arogant for this?
    what a silly boy you are, jimpiatt. did you try reading the help and terms of use? we're a user to user troubleshooting forum:
    What is Apple Discussions?
    you've also chosen to rant about a problem that Apple Hosts are actively soliciting information about. in this very forum. here's a set of search results on that:
    Apple looking for info on registering modules
    speaking of searching, did you actually search on "registering modules"? that way you can keep up to date with progress is also being made by your fellow users on troubleshooting the hang:
    a search on "registering modules" at the iTunes for Windows forums

  • Hi,  I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."  I rebooted and it didn't fix the problem. I just got

    Hi,
    I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
    I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

    Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
    Best of luck.
    (Occasionally from Lower Economy, Colchester County).

  • I had itunes installed on my pc. I received notice to update. I started update but gpt the following message - this application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem. I uninstalled and have tried to reinstall

    I already had itunes installed on my pc. I received an update and tried to install it. I got a message
    This application failed to start because MSVCR80.dll was not found. Reinstalling may fix the problem.
    I uninstalled itunes and tried to reinstall. itunes says it has installed but when I try to open itunes I get the same message.
    How do I repair/sort out this error/fault
    Thanks
    David

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • When  i play a song from my itunes library, there is a short "buzzing" sound about every 20-30 seconds. I had the problem before and thought it was fixed after verifying that itunes was my default player. Any ideas to fix the problem now??

    when i play a song from my itunes library, there is a short "buzzing" sound about every 20-30 seconds. This same thing happened some time ago, and i thought i had it sovled by verifying that itunes was my default player. Howerver, it has started up again. Any ideas how to fix the problem??

    I am having the same problem I have over 11.5 GB of .tmp files, many 1000s. Here is a thread I have found with some more info:
    http://discussions.apple.com/thread.jspa?messageID=824308
    That thread is almost a year old so I'm not holding out hope for a fix from apple. I'm going to try deleting them and see how it goes...

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • ITunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed.

    I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission.  I have administrative rights... please, any help and/or ideas will be appreciated.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • How i fix the problem on windows 7  itunes could not connect to the iphone because an invalid response was received from the device

    How i fix the problem on windows 7  itunes could not connect to the iphone because an invalid response was received from the device

    take a look at https://discussions.apple.com/message/24243668#24243668.  i had this problem and that solved it for me.

  • When ordering a project I'm getting a message " an error occurred while contacting the Apple online store. Please try again"  Can anyone please tell me why I might be getting this message and how to fix the problem.  Thank you

    When ordering a project I'm getting a message " an error occurred while contacting the Apple online store. Please try again"  Can anyone please tell me why I might be getting this message and how to fix the problem.  Thank you

    I've got the same problem.
    It wasn't the case before the upgrade to v 9.2 (Iphoto 11) yesterday.
    The previous solution preferences - advanced - "select a store" (last option) doesn't solve it anymore.
    Thanks!

  • TS1717 Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Hey HaydenJulie,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks,
    Matt M.

Maybe you are looking for

  • Pdf printing issue in macbook pro

    hi everyone, since i got a macbook pro, i found this problem. it doesn't respond to command-P (printing) at all. i removed and downloaded the newest version of adobe reader, i reset printing system, updated the printer driver,.. i can't print. i use

  • Regarding Account assignment categories in ECC 6.0

    Hi All, My client is going for a upgrade from SAP r/3 4.7 to ECC 6.0, In this process while creating Emergent orders in PLant maintianence module, an error "Invalid Account Assignment category" is arising with the following explaination under diagnos

  • LAPAC1750 Access Point Problem

    I have a device (Sony Xperia Z1 Compact) which cannot connect to the Access Point. The device can connect to other Access points (tried Motorola, Fritzbox, Cisco) without any problems. It does not matter what setting I configure on the LAPAC1750. It

  • Export Data Missing in Invoice for Accounting

    Hi , in a trading scenario wher in Maurtius export goods to SC-Seychells customer. PGI is done and when we did invoice we are enocountering _Missing Export data as status. Can u guys help me out in resolving this.

  • RFC Assign Link As XML Multiple Input Error SAP JRA Function Call

    I am using SAP MII 12.1.0 (Build 201) I have a problem with SAP JRA Function Call Action in Link Assignment as assign XML. I need to assign multiple input but from local xml property to my RFC table as assign XML but when i am going to execute my tra