I was given a ipod nano i think it's a 3rd gen. i have windows vista and when i plug it in my computer says there are no drivers for it.... help
I was given an older ipod nano, i think it's a 3rd gen 8gb... i have searched the iternet for help and have had no luck. when i connect the ipods to my computer i tells me the usd device is not recognized. i have tried to reset it and it still gives me the samething notice. i have even uninstalled my itunes and updated to the newest itunes available and still no luck. i can not find updats for drivers. i have windows vista.. can anyone help?
Installing the latest version of iTunes should provide the "drivers."
It was definitely working properly for the person who gave it to you? Is that person a Mac user?
I would try the following. Shut down (power off) your computer. Use this procedure to reset the iPod
http://support.apple.com/kb/HT1320
(It's the part that says How to reset an iPod with a Click Wheel.)
Disconnect ALL USB devices and peripherals (including hubs) from computer, except for standared mouse and keyboard. Start up computer that way. Run iTunes. Connect iPod to a USB port that is directly on the computer.
Similar Messages
-
I cant uninstall Firefox in the normal way please help, the operating system on my pc is Vista I can only get as far as allowing windows permission then nothing happens
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
|
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, and click "Next".
When you get through to the final screen, click the "copy to clipboard" button and paste the diagnostics into a reply here. -
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-tunes and plug in my Ipod I get a list of my music but cannot play it. Open to suggestions on how to solve this this problem.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
MyiPod classic won't charge. I just bought a new laptop with Windows 8 and when I plug in my iPod, iTunes will recognize it and sync, but will only charge during the syncing process. Any suggestions?
rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer -
My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
Its been like this for awhile and I can not fix itTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?
Take it back for a refund.
-
I have Windows Vista and my iTunes is v10.5, I have and iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need t upgrade my phones on a Mac? Please help it would be greatly appreciated.
Your expectations are not based in reality.
Your G4 will not run iCloud. There will be no upgrade from Mobile Me to iCloud for you with that machine unless you do it manually, and only mail will work without further expenditure. -
I have windows vista and can access my itune downloads but when I try to access the store it thinks about it and then stops - the bar is stuck halfway across. I get no message come up. Desperate to access the store but am at a loss what to do. I am a novice on the computer so an idiot's guide for me would be welcome. many thanks, regards Lesley
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
My iPhone 5 was in 50% battery life when it just turned off and it won't turn on and when i plug it to my computer itunes wont recognize it and i cant turn it on
try a reset
-
I have windows Vista and can't download itunes 10.PLEASE HELP!
I also have a 32 bit system. Is it not compatible for that?
-
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling
Maybe you are looking for
-
Same 6 bit color? I bet it is.
Sadly, all we have for color depth in the tech specs is the same old 'support for millions of colors' which we know in the past to have been a total lie. All the laptop displays have been 6 bit color, 262,144 colors, period. A great article on 6 bit
-
Any help on this message while RE-INIT?
Hi, I just tried to REINIT. Now I see the datasource on the R3 side in rsa7 but when I double click on it shows no data. In troubleshooting, Monitor gives a message that: Diagnosis You have not set the indicator "Update data in source system immed
-
Getting OAPageContext in extended VO?
How do I get the oapagecontext I am in when in VO? If I need to throw an exception does this make sense? or how do I do this in an extended VO? I know I can get the ApplicationModule but can I show a Dialog Page from VO when I am validating something
-
i try to download from app store but was asking meto upgrade to MAC OS X10.10, which i try to download but wont donwload, i have a IMAC( mac os x 10.6.3), how can i go about it?
-
Hi, I have a distributed environment . 2 webtiers = W1 and W2 2 Application Tiers = A1 and A2. I have read the upgrade guide still would like to clarify some dumb doubts. I have planned the following sequence . 1. Stop A1 and W1. 2. Upgrade A1. 3. U