I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?
i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?
I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html
Similar Messages
-
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it! -
TS1702 Apps will not download on my iPad they just sit there in waiting mode. Help
Apps will not down load on my iPad,just sit there in waiting mode. This includes updates.
Your iPad can only update one app at a time.
Two solutions come to mind. The first may work; the second should certainly work:
1. Try clicking on each of the updating apps to get it to the "Paused" state. Then, one at a time, click on an app which should resume its download, then let it install and complete. Then go the next app and repeat.
2. Reset your iPad. Hold the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears. Then, once the iPad is reset, start the process to get one app at a time downloaded and installed. -
My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?
My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?
-
App, will not run from other system
I use G5 10.4.3 with external (system) drive dedicated to xcode developing. Application created here runs perfectly OK, a copy of the app on internal drive runs OK. BUT boot-up on internal drive and niether copy will open ! help!
no problem,
I have always found that there was a relatively High level of expectations that ANY dev platform has for the new developer's ability to just understand how things work. The debugging vs. release target thing had me stymied for a few weeks (during which I was in panic mode), before someone in this forum understood what I was trying to say, and took pity on me. it is squirreled away somewhere in the documentation, but knowing where exactly to look when you don't know what is causing your problem... thats tough. well, at least its not as bad as MPW! as much as i loved finding out about MPW, and learning how to interface with it... it was also very scary and VERY un-mac-like. Now its just a menu option, or a Plist entry, or a checkbox in an inspector window.
Xcode = progress. -
Do I have to buy Lion or snow lepoard or is there a way to updated from OS X 10.4.11?? I have a new ipod that will not work without the ne itunes, but the new itunes will not install without a newer vesion of Max OS X. Help please
Need to know your Mac model. If it's a PowerPC, the max OS is Leopard 10.5.x. If it's an Intel procesor, you can upgrade to Snow Leopard (for $29) & later to Lion.
*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!
Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
I ve just upgraded from the 4s to 5s and my iMessage and FaceTime will not work or log in any suggestions
Hello there, Bromers87.
It seems that you're having issues with activation of both of these features on your new iPhone 5s. The following Knowledge Base article offers some pointers with issues activating them on your iPhone:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
If it seems that activation has gone through ok, then the following two articles offer in-depth troubleshooting for each application:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
and
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have downloaded the HD version of a movie from itunes, but when I sync it to my iPad 2 it will not play. It appears that it is on the iPad, but it will not play. Is this because it is HD, and if so is there a way to change it from being HD? Thanks
I'm having a similar problem ... just used my iPad 2 to purchase the Bourne trilogy and it downloaded fine but I did not try to play it right away. Then I plugged the iPad into the computer and it downloaded the SD versions of the movie and I used iTunes to sync my movies. Then I tried to play it and it said it could not open the movie. I then did a full iPad restore and did a fresh sync and now I get the Cannot Opne pop up. Did you ever find an answer to your question?
-
I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?
Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
Delighted with the new iMac but I have had an old version of CS4 for years now and it will not run on the new machine. I have tried Adobe customer care chat but it seems that nobody is available right now. Can anyone help?
I cannot locate the Flexnet folder by the way.... and the License recovery tool tells me that ....
You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
Where do I go from here please? -
App will not download to iPad when purchased from App Store - stuck with Cloud icon
Device : iPad Air 32gb wi-fi model (not cellular data)
OS version : 7.1.1 (up to date)
Location : UK
Problem : App will not download to iPad when purchased from App Store - stuck with Cloud icon
Last night I tried to download an app over wi-fi onto my iPad Air, but the app did not install.
I have plenty of space (the app is 24.1mb, I have 3.4gb free space) and there are no restrictions whatsoever on my iPad - no blocks on App store purchases, no age-related restrictions, no country restrictions etc.
Normally from the App Store page you would tap the price (in this case the app was free), enter your iTunes password, and the app would download.
Also a new icon appears on the home screen and a circle shows the progress of the download.
However this did not happen.
Instead I have the Cloud icon (the one that shows when you have bought an app but it is not currently installed on your device) and a message that says "You've already purchased this, so it will be downloaded now at no additional cost".
If I press OK I am then prompted to enter my iTunes password, the Cloud symbol briefly changes to a circle (and I mean for a split-second, like the blink of an eye) and then the Cloud symbol appears again.
The app does not download - in fact it does not even *attempt* to download.
I have tried this >20 times now and it always occurs excatly like this.
After Googling this problem (which seems common) and reading over a dozen threads on this forum plus Apple's own official support pages, this is what I've tried:
I can re-download other apps that I have previously purchased on this iPad, with no problems.
I purchased another app on my iPhone 5 and was then able to download onto my iPad with no problems.
I have reset my iPad >5 times - both by pressing/holding the home/power buttons, and also a full switch off and restart.
I have logged out of my iTunes account on the iPad, and logged back in.
The wi-fi is Virgin Media fibre optic broadband with a verified speed of 20 meg (confirmed by Speedtest) plus an 802.11-n Belkin router and my iPad will happily load web pages, stream videos on YouTube, download other apps etc.
I have reset/rebooted my internet connection
In an attempt to eliminate by broadband connection from the possible causes, I have switched off my router, linked my iPad to the hotspot feature on my iPhone and tried to download the app over cellular data, but still cannot download the app.
I have tried on 2 other wi-fi networks but still cannot download this one app.
My iTunes account has a cerdit balance from an iTunes card, but the app was free anyway
Nothing I try will download the app in question.
The app is iPad only, so I cannot install on my iPhone to try and kick-start the process.
I guess I could install the app on my computer and then sync the iPad, but that's *working around* the problem - it's not *fixing* the problem.
(Since getting the iPad I use almost never use my computer. And anyway what if I did not have a computer? Didn't iOS go "PC-free" with version 5?)
I would like to call Apple but my 90-day telephone support has expired (the iPad is around 6 months old) and I don't want to buy Apple Care for this one problem.
I can't make it to an Apple Store to speak to a Genius.
Bearing in mind the list of things I've already tried, what do I do next?
Thanks in advance for any support.Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help -
Report will not run after upgrade to new Crystal server
My company has been using Business Objects version 11.5 Central Management Console and InfoView for Crystal reports. We are upgrading to
SAP BusinessObjects BI Platform 4.1 Support Pack 1 Version: 14.1.1.1036 Central Management Console and BI Launch Pad. I have one report that is using a sql command for nat2date of a database value that is running successfully on InfoView but will not run on BI Launch Pad. The nat2date function is converting a random number in our database to a date and then selecting the records for the report by using the LastFullWeek function.
({Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)} in LastFullWeek)
Is there something I need to add to the new CMC to recognize this sql command?
Thanks for any suggestions!Ok, with BI 4.1 you'll need to use Crystal 2013 instead of Crystal 11.5. For the vast majority of your reports, you won't have to manually upgrade them because the 11.5 version will work fine in the new version of BO.
I suspect the problem you're seeing is with the "{Command.NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)}" syntax. is "NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME)" the field alias that you're returning for this function? Or are you trying to call the function like this? I would call the function and alias it in the "Select" clause of your command so that it looks something like this:
Select
...<various fields>...,
NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) as FROZEN_DATE
from
where
You could then change the selection criteria to something like this:
{Command.FROZEN_DATE} in LastFullWeek.
That will fix the report as is.
However, when you use the Select Expert for reports that have a command, Crystal will pull ALL of the data from the query into memory and then filter it there - it will NOT push this selection criteria down to the database. So, I usually recommend that you put all of the filter criteria in the Where clause of the command. You could use something like this to get "LastFullWeek":
NAT2DATE(PY_PAY_SEGMENT_T.FROZEN_TIME) between Trunc(Sysdate - 7, 'DAY') and
Trunc(Sysdate, 'DAY') - 1
"Trunc(Sysdate, 'DAY')" will give you the first day of the current week and "Trunc(Sysdate -7, 'DAY') will give you the first day of the previous week.
If you do it like this in the where clause, you may not have to include the "Frozen_Date" in the select clause.
-Dell -
TS1702 This app will not be deleted from any iOS device that synchronizes with your iTunes library.
How do you remove an app from your iPad? I have synced the iPad and attempted to remove and this is the messgae I receive:
This app will not be deleted from any iOS device that synchronizes with your iTunes library.
HELP! Get rid of these Doodle Gods, Kick the Buddy, etc....As Jim states, that procedure deletes the app and its associated documents from the device itself. At next sync, the deletion should propagate and get rid of the backup on iTunes as well.
If not, you can also manually delete that backup. Go into iTunes on the computer you sync the iPad with. If needed, select Show Sidebar in the View menu. Choose Apps under Library in the sidebar. Click on the All tab in the middle of the window. Scroll about till you locate the offending app amongst the bunch of icons. Right-click or Control-click on it and choose Delete from the popup menu. If the app is gone already on the device, there should be no warnings. You should delete from the device first and sync, so this manual step becomes unnecessary. -
I just upgraded to mountain lion osx and now my applications are crossed out and out of date. they will not run. how do i fix this?
Here is a recent post I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open, modify and save your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on images to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.
Maybe you are looking for
-
Can we preview data after RKM in SAP in ODI 11g
can we able to right click and view data in models after reverse engineering in SAP in ODI 11g ?? Edited by: Drona on Mar 16, 2012 1:06 PM
-
How to setup a network with airport cards
I have an unusual lapse in figuring out how to set up a network with an iMac and iBook both with 10.4.7. I have an Airport card in both machines after my Airport base stopped working properly. I have Comast DSL. The iMac is working fine and connects
-
How to install Dual OS(solaris 10 and Windows XP)?
I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows: Primary partition-5GB Remaining are extended Partition. Extended partition details 8 gb NTFS partition(installed windo
-
Hello Everybody I just need your help and suggestions . It will be really worthwhile if anybody can come up with answers to my question below. I have 4 years IT experience and have been working on Project Management of Web Development Field for 1st t
-
Error 2030 end of file was encountered: setpixels
Hi, I'm trying to understand what is wrong with my code that I get this error. var rect: Rectangle = new Rectangle(0,0,newText.width, newText.height); var bitmapData: BitmapData = new BitmapData(newText.width, newText.height); bitmapData.draw(newText