I was installing soundflower macbook pro mid 2011/Snow leopard Grey loading screen
Hello i was installing soundflower for my macbook pro mid 2011/Snow leopard. However when finishing the installation for soundflower and click restart computer my mac now has a grey screen with a loading bar that doesn't finish. I already try safe mode and it doesn't work. Is there a way to disable sound flower installation?
No. You use "C" to boot from the optical drive
Hold down the Option key to select a different disk drive to boot from
When it comes up with all the disk that have an operating system on them, select the one with the bootable clone on it
Allan
Similar Messages
-
13" Macbook Pro (mid-2011) audio in/out problem in Bootcamp Windows 7 64-bit
Hello,
I have a 13" MacBook Pro (mid-2011) and when in Windows 7 (64-bit) there is no way to configure the single combination audio in/out port to be an input. It is by default assigned to be an audio output and it cannot be configured otherwise in the Sound manager in Control Panel. In OSX the port is configurable. The audio driver is Cirrus 4206A (AB28), dated 12/3/2010, version 6.6001.1.30.I forgot to add that I installed the Bootcamp drivers from the OSX disc after I installed Windows 7 as instructed
-
Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Macbook pro mid 2011 battery lasting only 3 hours
How can I get my brand new Macbook pro mid 2011 battery to last longer, now it's lasting only 3 hours.
Do not believe the advertised specs from any manufacturer regarding battery life. In the real world expect about 60% to 70% of those figures. Battery life is influenced by many factors, Among these are display brightness, the number and type of applications you are running, if the optical drive is used, external devices that may be attached etc.
3 hours seems a bit low but not necessarily out of line. Go to SYSTEM PROFILER>POWER and see what it says by 'Condition'. If it is other than 'normal' you may have battery issues (Explanations then can be found in FINDER>HELP).
Ciao. -
I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.
That would indicate a network issue.
Reboot ATV and router
Make sure DNS is set to auto
Ensure router is up to date, if on wifi try ethernet
Go to istumbler.net to get a report of the network, look for signal strength and noise -
HT204267 Macbook Pro Mid 2011 Wont Boot
I have a macbook pro mid 2011 but wont boot. THe charging light and the power light in front come on but it does not make the start up noise nor anything like.
For those driving north of Belize, some distance into Mexico, there are
some authorized service providers and some independent resellers...
These are not exactly convenient to Belize users of Apple products.
And then there's Puerto Rico... between shipping & duties, + costs.
https://locate.apple.com/pr/en/
A different look into the Apple country locator may show retail resellers
though of those, as they are not Apple Store (company) those likely do
not offer a Genius bar such as the US & Canada. One could use Apple
locator page to see Apple sales independent affiliated resellers in Mexico.
Cancún area has three companies (total four locations) for Mac service.
Mérida apple retail independent resellers (seven) + two premium "iShop" w/ service
https://locate.apple.com/mx/en/sales/?pt=all&lat=21.0023779&lon=-89.609860299999 98
Cancún apple Mac authorized service independent providers (four shown this location)
https://locate.apple.com/mx/en/service/?pt=4&lat=21.161908&lon=-86.8515279000000 1
The Apple country locator page shows Belize -- But there are no listings in the Belize result.
Appears there may have been or could be some body there who had a business, once?
Sorry to say it would appear you have limited options, for sales and service;
when my dad lived in western Belize for 4 years and had Mac computers,
they took their own and backups. Occasional visits to the US allowed the
units to get service or repair a few times each year, if taken along.
Good luck & happy computing! -
I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!
Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao. -
I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)
It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go. -
If i download the new OS X Mountain Lion to my Macbook Pro that has Snow Leopard, will i lose my apps and downloads (such as: Microsoft word, powerpoint, excel, oovoo, skype) and will i lose all of my pictures/documents and information?
I should just change the OS and leave all your apps and data alone. That said, if any of your apps are old and use Rosetta (ppc apps), they won't run under Mountain Lion.
Make sure you take a good Time Machine or Clone backup before you convert.
You can check compatibility of your apps here:
http://roaringapps.com/apps:table -
Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?
These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/ -
Can intel 520 series SSD be installed in macbook pro mid 2009
This is some of the information for the 180g SSD I want to replace my HD in my 13" macbook pro mid 2009
25nm NAND Flash Memory
2.5” form factor
SATA 6.0 Gb/s performance
My computer though has this information for its hard drive:
Product: MCP79 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
I know that the SATA 6.0 will be backwards compatible with my connection, but I was wondering if I am going to hit any problems. I am going to do a full time machine backup so I can have everything cloned onto the SSD, but want to know before I buy the SSDRecently installed same type of SSD (Intel 520 120GB) in our 2010 Macbook (white) and runs just as well as its big bro. No problems at all. Storage isn't an issue since most stuff's in the cloud these days and we carry large files around on a USB stick. Way to go!
-
Macbook pro mid 2011 video card problems
Hi. I have a Macbook pro late 2011 and a have problems with my graphic card. I read 150 pages about this problem in apple forum, but don't receive any solutions to resolve a problem.
Well I got same problem today in OS X and when I restarted I got following screen and after few minsutes Laptop was switched OFF Automatically. I powered ON again ang got same screen but this time I quickly press CMD + C and screen goes normal this time.
-
On a MacBook Pro Mid-2009, i got a black screen.
Hi Everyone,
I have a MacBook Pro Mid-2009 17inch.
I use to run Windows XP for gaming. Recently, my logic board has been replaced. Now, i am unable to boot into my Windows partition : i am getting a black screen.
I deleted it with BootCamp assistant and created a new one.
Now, when i insert the windows install dvd, after reboot still stuck on black screen. I tried with XP install dvd and a brand new windows 7 install DVD.
Any suggestion accepted.
Kind regards,Try smc and pram resets:
SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
Make a Genius Bar appointment, they have extensive testing equipment and have evaluated for FREE.
They will give you your options.
If it is your Logic Board ask about the following:
http://www.apple.com/retail/geniusbar -
My macbook pro just gets stuck at grey startup screen
my macbook pro just gets stuck at grey startup screen
Reinstall OS X:
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
OR:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac. Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install. I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit. I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5). Also, my bootcamp assistant is version 5.. I have no idea if that matters. Help please.. been searching online for hours.
What model/year is your Macbook Pro? What operating system version?
Maybe you are looking for
-
Photoshop CS3 .png format not appearing in the "Save As" drop down?
I have been searching all over the internet and forums like this for a solution but have not come across one that works. I have tried installing an update for .png 8 bit and replacing the .png format file entirely, and to no avail. I'm sure all updat
-
I cannot place an electronic signature in a document with form fields?!
I have Acrobat Pro installed on a windows 7 and windows 8.1 machine. On both I have lost the ability to place an electronic signature (Draw my signature) and only have the option for a digital signature. The problem is remedied if I print to pdf but
-
Pop-up in a report with selection screen
Hi all, I need to display a pop-up as an input component for a report as it is executed. The controlling area has to entered inthe pop-up.The pop-up is same as the one in Transaction code CO99. How do i do this for report? Its not a module pool devel
-
Hello, will OAS and JServer support the EJB 1.1 spec including entity beans in the near future? Thanks, peter
-
Are SOAP headers supported in OC4J 9.0.3? I notice that in OC4J 9.0.4 the proxy code provide the request header support method _setSOAPReaderHeaders(). Is this method also available in OC4J 9.0.3?