I was just wondering when i turn my phone on it flickers between the home screen and the apple icon any ideas how to fix it ??, i was just wondering when i turn my phone on it flickers between the home screen and the apple icon any ideas how to fix it ??
i was needing someones advice on how to fix my iphone4 when i turn it on it flicks between the home screen and the apple icon
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
How do I turn off the "make a sound" feature with Find My Mac. I think my macbook was stolen and I don't want it to make a sound when it connects. Can turn the feature off somehow?
ica310 wrote:
I've read some forums that say I have to overwrite it with a silent sound file but I do not understand how to do this.
You have to jailbreak your phone to do this, voiding all warranty & support. Just flip the Ring/Silent switch when you send. -
I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!were you able to get help on this? I need help on error 5002 as well. thank you
-
How do I move photos that were taken when photo stream was turned off into the photo stream on my iPad2?
You will need to do that by syncing them with a computer and then syncing the computer with the iPad.
-
My iPhone 4s was playing music now won't on my sony dream machine how do I fix. "This device is not supported by this I-phone". I have turned off phone unplugged sony and did the pin reset on bottom. Help please I need my tunes
Try plugging it up to your computer and launching iTunes and either resetting it to factory settings or resetting to last sync. Hopefully it just noticing it's plugged up to iTunes will fix it. This happened to my friend once and all she had to do was plug it into her computer and that fixed it.
-
Wont turn on just flashes apple sign, for an ipad 2 what would cause this to happen When I tried to restore started to flash the dead battery sign
Hello Tommythecat_nz,
I would check to ensure that the device is fully charged if you got the dead battery indicator. Let it charge for some time.
-Derrick Lambert -
What has happened and how do I get my music back? Obviously I have some of it on iTunes but others I don't have anymore... I can't understand how my music would suddenly disappear when my iPod has been working fine. My iTunes was set to manually manage music (and even if it hadn't been, then my iPod would have been synced to it anyway, so that can't explain why it's gone) and all my apps are there as usual. It's the version of the iPod touch before the camera was introduced. Please help!
CharlieCharlieCharlieCharlie wrote:
My iTunes was set to manually manage music...
That makes it difficult to provide any assistance. I hate to say this but you chose to manage the music yourself and there's no way that i/we can figure out what you did that caused the problem. -
I was working with my iMac, it frozed suddenly, then I tried to restart it manually, after turing it on again,
It started beebing and the screen is black. What do I do now?Hi,
I was working with my iMac, the screen was suddenly frozen, then I tried to restart it manually, after turing it on again,
It started beebing (alarm-like) and the screen is black. What do I do now? -
When did Apple turn into piece of ****? It prompted me to update itunes and install icloud. I did. It crashed saying it was not properly installed and reinstall it. Since then I have been trying. I worry if my thousands of dollars worth of music is lost
I had a very similar problem, error 4251. (look in your log you will see that error) Since I finally fixed my problem, I thought I would see if I can help someone else.
What I found is that I lost burn ability in both iTunes AND Windows. Like you did. I did some digging and found that this wasn't hardware related at all. In fact, this boils down to a registry key getting messed up. (sigh) Yeah. It causes the system to get a bad 'handle'.
OK, here's what to try. Go to this Microsoft KB article. Scroll down and find the *manual* instructions for Vista. Delete the registry key that it specifies. Reboot. Now verify that you can burn in Windows. (If you have a RW disc, do a disc erase, or just try and burn from Windows Media Player.) If that is working now, you're on the right track.
Now the issue is that iTunes will still be broken. Go and install the latest Gear driver. (I know you may have done it, but do it again.) Now follow the intructions in this Apple KB article to verify the "GEARAspiWDM" info is back there in the registry. Now reboot. Try and burn in iTunes.
I hope this helps. -
I dropped my iphone 5 in the toilet about 3 hours ago, I've had it in a bag of rice since. I tried turning it on, but nothing. How long should I wait before i go get a new phone?
If water drained out of your phone when you pulled it out of the toilet it is most likelyh dead. Stop trying to turn it on or plugging it in. You really need to put it in a bag of rice for 3-4 days and just leave it alone. It will take that long to get it totally dry to see if it is going to come back to life.
Good luck, but since you tried to turn it on, and plugged it in while it was probably still wet inside I would not count on it surviving. -
My computer was dropped yesterday and it will not turn on past this gray screen that tells me to reboot it, but everytime I reboot it, it just goes back to that same screen and tells me to do it again. Anyone know how to fix this?
When you jar or drop a hard drive when it's operating the heads strike the platters and ruin sectors and the data on them.
Your getting the spinning wheel because the OS has been damaged and/or quite possibly the drive.
You'll first have to determine if it's a hardware issue
Do #3 Hardware Test and #5 Disk Utlity Repair Disk/Permissions here (check the SMART status)
Step by Step to fix your Mac
If the drive is fine and you don't have a recent copy of your data off the machine then also do this
Create a data recovery/undelete external boot drive
Then proceed with fixing the damaged software, likley by #8 your problem will be fixed.
Step by Step to fix your Mac -
How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?
Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again -
I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?
What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-( -
Hi. I have this situation: iphone 5s freezes and does not respond. connect to itunes to restore it, but there says that I should turn off search by icloud in the settings of cellphone. but if the phone freezes?? what to do?? help me please!! Thanks advanced!!
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support. -
I have an IPhone 6 I'm going on a cruise and I won't be making calls or using data I'm just wanting to use the camera ...is there something I can do to to turn these off?
All you need to do is turn on Airplane Mode. It's in the settings, or the easier way is to swipe up from the bottom to open the Control Center and turn on Airplane Mode there. It's the first button at the top, with the airplane icon.
When you turn on Airplane Mode all of your data is shut off. You can optionally turn on just Bluetooth and Wifi if you want; for example, if you wanted to use the cruise ship wifi without turning on your phone radio, or if you wanted to use a Bluetooth speaker or keyboard. But if you don't need all that just turn on Airplane Mode and leave Bluetooth and Wifi off.
Maybe you are looking for
-
Is there an on-line ABAP OO Tutorial? If yes, can someone point me to it? Thanks!
-
Java Class loaded in Database.
hi I have loaded a Java class into Oracle 8.1.6 database. I have created a procedure (call spec) for calling a method in that class. It takes 3 parameters (Server ip address, From,To). Actually the purpose of the program is to take parameters and sen
-
Dummy PC/ Intercompany postings
Hi Experts, Can some provide me some reason why the dummy postings occure in any transaction related to AR, AR, intercompany, balances postings? One of the reason i know is if we don't assing Profit center to the source objects like costcenter, WBS,
-
Using WS-Security with Spring application in WebLogic
From a high level, are there any issues with using WS-Security in WebLogic 8 or 9 with an application constructed with Spring? What issues might come up between WS-Security and Spring that might make this complicated?
-
External Page Displayed In Page Fragment
Hello, I am attempting to replicate the method in which frames work by using Page Fragments. I have a header at the top of the page and a "frame" along the left side of the page that allows for navigation. The rest of the web page is an area that upd