I was on facebook and suddenly the screen froze, and nothing is working?
I was on facebook on my ipod touch and it suddenly froze, and is completely unresponsive. I've tried plugging it into a power source, restarting it, and everything but it won't unfreeze?
try holding the power and home buttons in till the apple logo shows then let go and allow ipod to reboot
all app music etc are safe
if this does not unfreeze the ipod
plug ipod in to computer if itunes finds it restore to a back up or factory settings and sync app's etc back on to the ipod
Similar Messages
-
I tried restarting it by using just the power on button at first. Once that failed I held the power and home buttom for ten sconds and that didn't work. I then plugged in the ipod to see if it needed charged, and repeated the same two steps at before but to no avail. Finally, I opened up itunes and plugged my ipod in, but nothing came up. I then tried to turn it on for a third time, but nothing happened. I just confused on what happened. Could it be a bad display, or did the whole thing just die on me? Help please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I was on my ipad and suddenly the screen went dark with only the ipad wifi connection and the battery charge visible. im not able to turn off my ipad or touch anything since nothing is visible its just dark.
never mind, i rest it, its all good
-
while scrolling thru my facebook page. The screen suddenly changed to very small print and blurred / fuzzy not clear. The whole page had changed the way it was showing. So I tried another browser and facebook page was working fine. Went back to firefox and still had issues.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
I was holding my iphone in my hand for a while and suddenly the screen is gi-normous...what do I do??? how do I reboot???
to reboot you hold the power on/off button and the large home button together until you see the little apple logo.
However if you take three fingers together you can tap the screen back to its former size.
See article below.
My iPhone Icons Are Large. What's Happening?
Good Luck -
Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?
- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on -
ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.
I think you should make an Genius Appointment.
Genius Appointment
http://www.apple.com/retail/geniusbar/ -
I was updating my ipad (ios7) while syncing with my laptop. suddenly the screen turned black and seconds later a huge itunes icon appeared on the screen. the same icon appears and not the usual interface even after resetting it several times.
please explain whta's happening.
thank youSee Unable to Update or Restore > http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766 -
HT1657 i was watching a tv show and suddenly the screen went green what can i do
i was watching a tv show on itunes and suddenly the screen went green ,what can i do
& its not because of apps or anything i think something's wrong with the screen!?!?
-
I was using my I phone 4s and suddenly the screen flickered and the colours went strange
Was using my I phpne 4s and suddenly the screen started flicking and is strange colours, phone still works in every other way. The screen has been replaced months ago. The creen also has a line 3/4 of the way through it. Is it fixable?
Oh NO!!!
http://www.youtube.com/watch?v=iJ90ZqH0PWI
I think you really need to find out who is putting that stuff into your iTunes library....
It's doing bad things to your mind....
GB -
i need help. i tried updating the software on my ipod touch, and it looked like it was working fine, because it said "verifying update", but suddenly the screen went black and when i tried to turn it back on, it only had a picture of a usb chord pointing to the itunes icon. what do i do?
Your iPod has dropped into Recovery mode. You'll need to restore it via iTunes on your computer.
http://support.apple.com/kb/ht1808
Regards. -
My MacBook pro has been working fine but all of the sudden the screen went Fluro green. I restarted the computer by holding the start button down and evert since , every time I turn it on the screen is black . I've restarted it several times and the screen doesn't change.
Shanice4 wrote:
Im not sure what that means ?
What part of the Article that I linked you do not understand? -
I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?
Most likely the LCD Display connector simply came loose from its logic board connector. Take iPhone back to where it was repaired, and ask them to simply press the connector back into its place. Ask them to apply a bit of foam material or several small pieces of tape on top so the pressure of the flex connector plate holds it properly in place for the future.
-
my iphone froze last nite and i was unable to exit the app i was on, it then switched the screen off as if it was not in use, now i am unable to open my iphone or switch it off, calls are still comin thro as phone is vibrating but im unable to answer as cant activate the screen?????
pls helpSee Here for > Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062
Maybe you are looking for
-
Thoughts on Stream-to-Disk Application and Memory Fragmentation
I've been working on a LabVIEW 8.2 app on Windows NT that performs high-speed streaming to disk of data acquired by PXI modules. I'm running with the PXI-8186 controller with 1GB of RAM, and a Seagate 5400.2 120GB HD. My current implementation crea
-
Adjusting brightness of graphics in .pdf files.
How do I adjust the brightness level of my color graphics in my .pdf files in Acrobat 9 Pro? All graphics are printing way too dark. Printer is a brother 9840 MFC color laser. Thank you.
-
Project Server 2013 - Reporting ( Project publish ) Queue Job Error - 24006
I am trying to publish a project and getting below error please provide me a solution your help greatly appreciated Reporting ( Project publish ) Queue Job Error - 24006 General Reporting message processor failed: ReportingProjectChangeMessageFailed
-
Using ActionListener to change JPanels
Hey, I'm currently writing an app which uses a set of JToggleButtons to alter the selection of a range of user interface elements on different panels. When a user selects a particular toggle button i want the panel or frame to change to a different p
-
Error occurring "opitsk: network error occurred
Hello All, Platform : Windows-2008Server 32 bit,Oracle10gStandard,OracleFS 3.4 I have two cluster nodes(NPRDB1, NPRDB2) with Microsoft clustering and Oracle Fail Safe. The Oracle database is hosted at a common node PRDB. All my services (including my