I was prompted to change batteries.  I did and now my track pad is not working

I was prompted to change batteries on my track pad.  I did and now the track pad is not working.

Did you replace your battery with one of as good quality as that you are disposing of.   Does the indicaror light show when you start up.

Similar Messages

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • Changed My HDD Password and now it says it is not correct

    I changed my HDD password and now it says it is not correct and will not key my laptop startup.  The previous password does not work either!  Help Please!
    Dell Latitude E6530
    Have all this info available if needed
    Service Tag, Hard Drive #, Asset Tag #, Computer System #
    THANK YOU

    Hi Leanna82,
    You'll need to contact Dell and provide proof of ownership for help with a hard drive password issue.
    Good luck!

  • I have a very similar problem (5506) in that I changed my appleID loginid and now none of my home shares work. All itunes have been re-authorized/authenticated with the new appleID string. Yet I still receive this error. I too am looking for suggestions.

    I have a very similar problem in that I changed my appleID loginid and now none of my home shares work (5506) . All itunes have been re-authorized/authenticated with the new appleID string. Yet I still receive this error. I too am looking for suggestions.

    If you no longer have the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store,  deauthorise all five, (Please Note: this can only be done Once every 12 months)  and then re-authorize your current Computer(s) one at a time.
    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420

  • HT204291 I did the update my apple tv this morning and now my air play is not working ?

    I did this morning update in my Apple TV and now my air play doesn't work!

    READ the article from which the question was posted and follow the troubleshooting steps provided.

  • My track pad is not working. The computer has been off for 10 days and I changed the batteries

    Can someone help me with my iMac track pad?  My computer has been off for 10 days and when I turned it on the curser will not move.  The green light on the track pad would come on then off so i replaced the batteries in the track pad but it still does not work.  Not sure if the grandchildren were on it over the holidays could something be locked on the keyboard?

    1. Make sure that battery is in normal condition.
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk  Permission
        Ignore the  time remaining estimate.
        Last 1 minute may take longer.

  • Our aol email was hacked and now our Apple ID will not work which means no acces. To icloud. Etc. how do we fix?

    Our aol account was hacked overseas.  The Apple ID and passwords no longer work.  We can not access any Apple products. ID icloud, iTunes, etc. how do we  override the old Apple id and change/or  ID and passwords?

    What do you mean by "won't work"? Are you indicating that your Apple ID was your AOL email address? Have you attempted to change your Apple ID here:
    Apple - My Apple ID
    Cheers,
    GB

  • I just changed my password for I tunes and now my I pad does not sync with iCloud

    I changed my password for Itunes on my Imac and now my Calendar does not sync on my Ipad.  Any ideas on how to get them in sync again?

    I am not sure that you changed the correct password, online credintials usually are seperate/different from wifi ones. Please check the quidelines on http://ee.co.uk/help/phones-and-device/ee/EE-Osprey-2-mini to see how to solutions. I hope this helps.

  • I did a clean install of snow Leopard and now my iWork 09 will not work. does anyone one know where I can download the version for snow Leopard?

    I did a clean install of Snow Leopard and now when I reloaded iWork 09 from my timemachine it will not open anything. any ideas.

    iWork '09 is still available from the likes of Amazon.
    Your experience is why I never trusted downloaded versions when there's a physical DVD available.
    It may be possible to reactivate with your code, but I can't advise you as to how.

  • When I purchased my ipad I logged on with my hotmail address apparently it got hacked so was advised to change this I did but on the i pad the old e mail address remains as my icloud account name how do I change this ?

    When I purchased my I pad at the store they advised me to log on with my hot mail address we did this and apparently found out that my Itunes account had been hacked. I was then told that apple would cancel my hotmail account and that I had to use a new  email address which I did logged on everything has changed apart from the Icloud account which is still keeping the old e mail address as my id. Please can someone explain how to change this. When I look on my i pad there is a red bar that says delete account I was wondering if I deleted this would everything be ok if I started over again?
    Thank you in advance for any help.

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • My MX922 needed some cartridges changed which I did, and now it will not print. The paper goes thru

    My year sold MX922 is about a year old and no trouble until today.  I needed to change some cartridges, which I did.  They are are full but when I print the paper goes thru and sounds like it is printing but comes out blank.  I cleaned the heads and printed a test.  The 8 color bars and grid at top came out perfectly.  Why can't I all of a sudden not be able to print anything from my computer?  I have a Mac 10.7.5. 

    Hi Artist85,
    To resolve this issue, it is recommended that the PIXMA MX922 is reinstalled.  Please follow the steps below to uninstall the printer driver:
     1.  Double-click the Mac HD.
     2.  Double-click the Library folder.  The default behavior of Lion is to hide your user Library folder. To get to it Option-click the Go Menu in the Finder and choose Library.
     3.  Double-click the Printers folder.
     4.  Move the Canon folder to Trash.  Note: If you have any other Canon printers installed, they will need to be reinstalled as well.
     5.  Open the hard disk icon again and double-click the Library folder.
     6.  Double-click the Receipts folder.
     7.  Move any files related to the PIXMA MX922 to the Trash.
    Please use the following steps to download the software for your unit from Canon's web site:
     1.  Visit Canon's website at:    http://www.usa.canon.com/cusa/support/consumer
     2.  Type PIXMA MX922 in the "Enter Your Model Name" box and click GO.
     3.  On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
     4.  Under Recommended For You, please click on the MX920 series Mini Master Setup.
     5.  If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
     6.  Click on the Download button.
     7.  A File Download box should appear and the file will be saved automatically.
     8.  Once the download is complete, close all windows.
     9.  Double click [mms_-mac-mx920-1_0-mcd.dmg] to install your PIXMA MX922.
    Files will extract, follow the prompts to complete installation.
    Once reinstalled, please attempt to print.
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT1750 Changed batteries in mouse and now it won't work.

    Why won't my mouse work after I just changed the batteries?

    They are in the wrong way? The new batteries are dead? You slid the on-off switch to off?
    Bluetooth got turned off, mouse is no longer linked to system?

  • I have changed my location from korea to pakistan and now my iphine 4 is not working?

    i have shifted in pakistan but my i phone is not working.
    its iphone 4 and version 6.01

    Very vague.
    In what way is it "not working"?

  • We have not changed any settings and now our face time will not work!

    Since last week I updated my iPhone we now have 4iphone 4s who cannot now get facetime, yet on the same router the 2iphone 5s can receive calls no problem, Antony know why!!!!!!

    If the 4S are still running iOS 6.x, Apple insists that is the problem. Especially after the recent release of 7.1.1.

Maybe you are looking for

  • Shared Review problem for remote review SME

    One of my SMEs works offsite via a VPN connection. When she tries to participate in the shared review process from the PDF location on the network drive, she has display problems (all the text is highlighted in black) and she can't "connect" to see o

  • I have got a problem that all application in my iPhone gone

    Dear Sir, I have update soft wear for iPhone 5 after update version my allocation are disappear

  • I need to be able to "swap" themes...

    I have two slide decks that have the exact same content but need to be themed differently (different clients, etc). Is there a way for me to "swap" themes so that I only have to update in one place?  When I've attempted this, Keynote seems to not "ma

  • Help me needed

    Hi Experts, can any one mail me step by step process of BDC for both (session and call transcation) with screen shots, I dont need links, [email protected]

  • Canon XF camera metadata in CS6

    Hello, Can  you see camera metadata, like Shutter Speed, F Number, Gain, Color Temperature etc. from Canon XF files, directly in Premiere Pro? I can't find this properties in Metadata Display menu.