I was stupid, and now Flash won't play (Mac)

I have a problem — due mostly to my own stupidity, I think.
A couple of days ago I was visiting MacUpdate and spied a listing for Adobe Flash Player 10.2.161.22. It didn’t say, at the time, that this was a beta release. Anyway, since several sites had suggested that I needed the latest Flash Player to view their content, I downloaded and installed it: that was my first mistake.
Once installed, all the graphics in both browsers (Firefox and Safari) went nutty: nothing would display properly. Thinking that I could just install the previous version, I downloaded that from Adobe. Well, that couldn’t be installed, because a newer version was in place.
Okay, I thought, I’ll just throw away the Adobe Flash Player and re-install. What I did, was to go to my folder Internet Plugins and throw away the Flash Player and the other file in there: that was my second big mistake. I then installed Flash player 10.1, but all my sites were now telling me that I had no Flash player installed. Just to make sure, I tried reinstalling several times: didn’t work.
I suspect that the second file (whose name I can’t remember) that I threw away in my Internet Plugins folder just might have been important. Can anyone help? Any advise would be really, really appreciated. How do I fix this mess?
I’m on a Power Mac G5, dual two-gig, 6 GB ram, running system 10.4.11 (32 bit), with the latest versions of Firefox and Safari.
Thanks,
Bob Dawson

Hi, Well Bob, that is certainly good news!!
You did very well, glad it is working for you. That was tricky, getting all those ducks back in their row:-)
You might try www.ESPN3.com. If you have any problems read the system requirements and especially the FAQ part.
Thanks for posting the steps you took. Hope you didn't have a difficult time following the procedures on the Uninstall or Install sites.
No more betas for you!! LOL,
Regards,
eidnolb

Similar Messages

  • Updated Firefox AND Flash, and now flash won't play anymore

    So, back in the last version of Firefox, Flash v11.3 wouldn't load correctly. The official solution was to roll it back, install a previous version, and I guess that's alright, but I was really hoping it was a temporary solution.
    So now Firefox has updated to version 15. I thought this would solve the problem, and according to the old entries about Flash not working, it has. But then I updated flash, and now it's 11.4, and after updating twice I'm right back where I'm started.
    Maybe this hasn't been articulated well enough? The problem isn't that it's a specific version that doesn't work and I'm willing to keep all my plugins in eternal limbo, it's that it doesn't work period. So, I guess I'm just supposed to roll back again? What should it be this time? Flash or Firefox? Does it matter? Which one hates the other one more? Will there ever be an actual solution to this, or will I just have to have outdated versions of one or the other forever?
    And also, this is curious, according to this thing below that automatically reads your plugins and what not, I not only have 11.4, but also still have Flash 10.3 installed somehow. Maybe that will make it easier to roll back, but... does that make a difference? Is there anyone with Firefox 15 and Flash 11.4 that doesn't have this problem? I'm kinda hesitant to delete 10.3 because I might... you know, need it.

    Shockwave Flash 11.4 r402 <br />
    Shockwave Flash 10.3 r183
    Having both versions installed is probably a big part of your problem.
    Uninstall Flash completely. <br />
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    Then install the version that you found to be least problematic for you, which sounds like v 10.3.
    Personally I have stayed with Flash 10.3, which is still getting security updates from Oracle / Adobe. Then again, I am using WinXP - not Vista. I have had no problems with Flash 10.3, like the problems I have seen posted here with 11.3 and 11.4.
    YMMV.
    Keep in mind that IE uses its own version of Flash - ActiveX is what it is called in the Add / Remove Programs in the Windows Control panel. That version won't affect Firefox in any manner. The version numbers don't need to be the same for both the ActiveX version of Flash and the '''Plugin''' version which Firefox ''(and most other browsers)'' use.

  • I was playing my iPad 2 I left the room for 5 minutes when I came back it was off and now it won't turn back on

    I was playing my iPad 2 I left the room for 5 minutes when I came back it was off and now it won't turn back on

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My iphone 5 was 'restored' and now it won't sync with my mac calendar

    my iphone 5 was 'restored' and now it won't sync with my mac calendar

    Have you tried resetting your device: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the "Slide to Unlock" screen redisplays, see if your issue is resolved.
    Cheers,
    GB

  • Upgraded to the latest Keynote (5.3 1170) and now videos won't play in presentation mode, only audio

    Upgraded Keynote on my home and work computers to the latest version in the AppStore and now videos won't play in presentation mode.  In edit mode you can double click and it will play in the editor.  This happens on both computers running the latest version of ML (10.8.4).
    Any help here?  Alread tried a reinstall of ML on one machine with no luck.
    Was previously running Keynote 08 (non AppStore version).  Tried creating brand new presentations in 09, no luck.
    -steve

    I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
    Here what I figured out so far:
    1. It happens when you have PPT open and connect to beamer afterwards
    2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
    3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
    4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
    So in short: Connect to beamer first, then launch PPT
    I know it is only a symptom fix but it worked for me

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

    i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
    If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen.

  • Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

    Hello
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Best of luck,
    Mario

  • I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why

    I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix

    I have 2 ipad ist generations.  I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix.

    I have the iPad2 with IOS5 and Netflix works fine with the Netflix application - I didn't try from Safari. 
    It shouldn't behave differently between iPad1 and iPad2.

  • Updated itunes and now it won't play any of my music, updated itunes and now it won't play any of my music

    i updated my itunes, and now it won't play any of my music. i tried deleting it and reinstalling itunes, but it still is doing the same thing: whenever i click on a song, it looks like it's going to play (and my last.fm thing starts scrobbling it) but it just doesn't play the song, ever. it sits there, with the play button played. i am so frustrated with itunes, and i have no idea how to resolve this.

    Hi ryanmar,
    If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Regards,
    - Brenden

  • I downloaded a rental movie, and now it won't play. I get an error message that says "We could not complete your iTunes store request. An unknown error occured. (-42110)" This computer is authorized, and I am online and I've downloaded rentals b4. Help?!?

    I downloaded a rental movie, and now it won't play. I get an error message that says "We could not complete your iTunes store request. An unknown error occured. (-42110)" This computer is authorized, and I am online and I've downloaded rentals before. Help?!?

    Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • HT4993 I have an app that was updated and now it won't open

    I updated an app on my iphone 5 and now it won't open. How do I fix this without loosing my data on the app.

    Double-press the HOME button, find the app, and flick its screen image up to kill the in-memory copy of the app. The reboot your phone by holding the HOME and SLEEP buttons until an Apple logo appears.

  • Bought an album and now it won't play!

    I bought an album off of itunes store and it shows in my purchased and also in my music library, but it will not play. I push play and it stays at 0:00 and i'll move the dot to another time in the song and it still won't play. Anyone know whats wrong? I'm so mad if i can't do anything about it!!!!

    Hi There
    I suggest contacting the Apple iTunes Store by clicking the report button in your iTunes purchase history (Step by step guide for doing this: http://support.apple.com/kb/HT1933) or by filling in the form at http://www.apple.com/support/itunes/store/browser
    Hope this helps
    J.C

  • A glass fell on my MacBook Pro when it was open and now it won't turn on. Any suggestions?

    A glass fell off a shelf onto my open MacBook Pro. It initially started making strange noises, so I tried to restart it and it froze. I then turned it off and now when I try to turn it on, the screen lights up with just a question mark and continues to make strange noises. Any suggestions on what I should do? I think it is insured so would the apple insurance cover this?

    Accidents are not covered by the Apple warranty.
    If the glass had water in it, you need to keep it turned off and unplugged until full water damage can be determined.
    If just a heavy object, then the "questionmark folder" and funny noises suggest the image on the hard drive was injured or the drive itself injured.
    I suggest getting it evaluated  by Genius Bar.  Too many variables currently.

Maybe you are looking for

  • Capture contents from an editable alv

    I'm trying to capture fields from an editable alv. I have an update button in the application toolbar. So when i press this button, whatever changes I have done on the screen, the internal table should get updated. I'm using the function module    RE

  • Remotes will not work with Apple TV

    I am so very frustrated with my Apple TV right now. It has worked flawlessly for over a year, using both the Apple TV remote and the Apple remote on my iPhone. A couple of weeks ago, my ATV Remote stopped working, but I figured it was the battery. I

  • Foreign Trade Reporting

    Hello We have a requirement to create two customs related reports out of SAP 1. The Foreign Trade Zone report-a report of all items entering and leaving the Foreign Trade Zone over a month 2. The Pedimento report-a report of all duties owed to the Me

  • Chart / graph won't show negative values (Keynote '08)

    Hi, I have a range of values from -100 to +100. When I edit the source data accordingly, the line only shows value from 0 upwards. all negative values are shown as Zero 0. problem occurs in numbers too, and also carries over to an export. Am I missin

  • FlexRIO DRAM problem in Labview FPGA 2010

    Hello, I am just switching from Labview FPGA 2009 to Labview FPGA 2010 and I am having compilation problems with very simple projects that shouldn't fail to compile. I am using a FlexRIO 7965R board as a target. Initially, I just wanted to recompile