I was trying to connect my nano 3rd gen 8 gb to spotify, so i restored my ipod, but then it started resyncing my itunes library, so i cancled the the sync by exiting itunes, then it still wasnt in spotify so unplug replugged it and now the screen is grey
and myt computer wont register it at all anymore, itunes alerted me that it was in some sort of mode, but i do not specificaly remember what it was
Try to reset it. To do this, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Try this more than once if necessary.
B-rock
Similar Messages
-
i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......
-
I have an iPod Nano - 4th gen. How do I get music (which I didn't purchase on iTunes) from my iPod into my iTunes?
If the iPod is the only place that you have the music (e.g. you don't have it on a backup drive) then there are some programs listed half-way down this page which should be able to copy it back from it : https://discussions.apple.com/docs/DOC-3991
You can then add it to your computer's iTunes library via File > Add To Library -
Greetings!
I clicked on a few free game Apps to check them out. After deciding I did not want them, I deleted them from my iPad by leaving my finger on their icons until it started shaking. However, each time I click on the App Store icon, I see the same game Apps there as "purchased" Apps, with a cloud and an arrow pointing down from it, next to each App. How can I get rid of them once and for all?You can't it's only a history. The apps are in the cloud and not taking up space on your iPad.
-
Hi, I have a mac book pro running mavericks and recently tried to connect to a 3rd gen apple tv but the airplay icon is not showing up in the top bar. I then tried my girlfriends laptop running mountain lion and it showed up straight away. Any suggestions?
How old is the MacBook Pro? AirPlay is only supported on 2011 and newer models, due to the requirements it has in hardware for graphics acceleration.
-
Ethernet connectivity problem appleTV 3rd gen to airport extreme 5th gen
I have an airport extreme connected with Tivo via a Trendnet ethernet plugin adapter via electrical outlet, and it works fine. When trying to connect my AppleTV 3rd gen to another ethernet port of airport extreme with another faster (85mbps) Trendnet ethernet adapter via a different electrical outlet, my extreme goes from green light to flashing amber light and my wifi stops working. Only when I disconnect the ethernet and start using wifi for my appleTV, will the airport extreme start working again. It's driving me nuts.
My setup is ethernet (no cable modem or DSL modem) with the ethernet cable that supplies internet to my house coming through a router device (I think it is?) that is plugged into my airport extreme. However, I do have a double NAT setup as my ethernet service has its own NAT too. I tried switching from DHCP and NAT on the airport extreme to bridging mode as recommended, but then my internet doesn't work and I get a flashing amber light. So I went back to DHCP and NAT on my extreme and am ignoring the double NAT, and so the wifi works fine now.
I have done multiple hard resets of all devices involved including the appleTV, airport extreme (I have set up my network at least 10 times) and have unplugged my router device and disconnected the ethernet cable supplying internet to the house as well. Nothing seems to work. I called tech support, and originally thought that my 3rd ethernet port wasn't working, so they mailed me another unit, which doesn't work as well (in fact, I keep getting a message to unplug my cable or DSL modem or disconnect the battery pack to cycle it no matter what I do but that is for another time).
Would greatly appreciate any help. Thanks.When trying to connect my AppleTV 3rd gen to another ethernet port of airport extreme with another faster (85mbps) Trendnet ethernet adapter via a different electrical outlet, my extreme goes from green light to flashing amber light and my wifi stops working.
If the Apple TV was originally setup for WiFi, I suggest that you reset the device back to default settings and then configure it again with Ethernet plugged in. Settings > General > Reset > Reset Settings
As a test, connect a spare Ethernet cable of any length (that you know is working) from the LAN <-> port on the AirPort Extreme to the Apple TV for the setup.
Setup the ATV again and double check to make sure that it is operating correctly
Change the location of the ATV back to the desired location on the network behind the powerline adapters
If you have a problem now, the first thing to check is the powerline adapter and or wiring -
Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
NEED URGENT HELP!
My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!Reset the SMC.
Barry -
My ipod nano 3rd gen will not sync with itunes now that we have downloaded the latest version 8.0.1. Itunes locks up immediately upon recognizing my ipod and closes upon clearing the error message (systems error upon opening itunes). Originally I was unable to open Itunes all together, but after going through the support programs and following the instructions of removing one of the SDDb files, Itunes was at least opening. Unfortunately I am unable to do anything with my nano when it is connected to the computer or when I try and connect it after opening Itunes. Itunes open if there my nano is not connected to it.
I am completely at a lose. Please offer some advice.
cheers,So, to bring closure - and possibly help someone else with the same question - I'll answer my own question.
The new 3rd Gen Nano arrived today. I just decided to install iTunes on the new computer and connect the new Nano to that computer. I was prompted to name the Nano and I was able to log into my existing iTunes account and purchase music. I was not able to transfer those purchases to the Nano - got an authorization error. I needed to authorize the new computer and then I was all set.
It turned out there was already a 2nd authorized computer on the account (my laptop which I had forgotten about). I was surprised that when I connected the new Nano to that laptop, it was recognized without question - and without affecting the old Nano that had been previously docked to the laptop.
My only problem was downloading a podcast that I subscribe to (Leo Laporte's The Tech Guy). I tried downloading the last 4 or 5 podcasts on the new computer - but, kept getting a network timeout error. I tried on the laptop and got the same errors. I knew that these had been previously downloaded to the old desktop. So, I updated that to the latest version of iTunes and was able to get those podcasts onto my new Nano.
So, the bottom line is this turned out to be a no-brainer. Was worried for nothing. -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT1447 Plugging in my Nano 3rd gen into iTunes 11.1 on OSX 10.8.5 causes iTunes to beachball.
I've restored the iPod with iTunes 11.0.5 on my Macbook, and iTunes 11.1 still freezes/does not recognize the iPod. Help! Is the iPod nano 3rd gen still supported by Apple?
I finally let iTunes have time with the nano and it eventually popped up the following window:
"iTunes cannot read the contents of the iPod "<name>".
Go to the Summart tab in iPod prferences and click Restore to restore this iPod to factory settings."
Then iTunes beachballs again.. then eventually shows me the restore screen. I restore and after the nano reboots.. iTunes once again beachballs and eventually shows the Welcome to your new ipod sceen. It starts to sync, then eventually errors out with The iPod "<name>" cannot be synced. An unknown error occurred (-54).
It's almost like there's something blocking the hardware from mounting or something. This doesn;t happen on any iPad's or iPhones. Disk use is enabled, but I cannot turn it off. I wish I could as maybe that would help. -
My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes
I'm tring to convert video from Youtube to play on my ipod nano 3rd gen. When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
What do I do? I tried Real player converter too - no luck.I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
B-rock -
Ipod nano 3rd Gen not recognized by itunes or windows 7
USB device not recognized.
things I have done
put Ipod in disk mode still didn't recognized
My Ipod Classic 6th Gen works fine
It shows 3 Mass Storage Device
when I plug in Ipod nano 3rd gen it shows unknow device
have deleted Mass storage devices and Apple Moble Devices
unpluged computer from wall
nothing solving problem
I also tried it on my laptop its not being recognized
my wife Ipod nano is doing the same thing as mine
its got to be the software download from itunes because it has worked on all previous versions.I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
I have tried resetting, I have tried downloading newest Itunes.
Must be the Nano itself if it doesn't get recognized by mutliple PCs?
I haven't used the Nano for probably 2 months. Previously it worked fine...
One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer... -
heey i bought an iphone 3gs about 2-3 months ago (used) was in mint condition well taken care of not even a scratch as soon as i got home i tried syncing it to my computer but didnt work it didnt even sync or notice my iphone software .. so i went to my friends and synced it there it has been working for music but videos wont work? but i didnt care and then the pop up that says update so we would click it wait and it wouldnt work ever since ive had it so i left it like that so i went to my friend today i blanked it off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it PLEASE HELP and cant get a new sim at the moment or take it into the apple store because i live about an hour and a half away from the city and rarley go to it please help me !!!!!!!!!!!!!!
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
Maybe you are looking for
-
Even though I connect my computers with an ethernet cable the files are still being transferred wirelessly. I can tell because the transfers (usually around 4GB) take a few minutes with AirPort off, but 30 minutes to an hour with AirPort on. I want
-
Hi everybody; I have an issue with UTL_FILE. I have defined ORACLE directories with SYSTEM : select * from all_directories; OWNER DIRECTORY_NAME DIRECTORY_PATH SYS TEST /home/support/I gave the gran
-
Save pdf to folder as JPG fails
I have completed the update process so I am running Yosemite and Aperture 3.6 When I try to use the automator work flow that was installed with Aperture (Save pdf to folde as JPG) , I get an error message that "Retrieve Disk Item References encounter
-
How to tell Apple about the bugs
I do not think Apple read this community Therefor EVERYONE here should report bugs to https://www.apple.com/feedback/ipad.html Be sure it is a bug and not a question
-
Bridge Prerelease Program Openings
Bridge Customers, We are looking for a few interested Adobe Bridge users to join our Prerelease Program. We need customers who use Bridge in their workflow regularly and want to provide constructive feedback to the Bridge team on monthly prerelease b