I was unable to access migrate assistant to reinstall my hard drive. I didn't know if it would work but I used the time machine restore button that opens up in the space movie. The computer said it would download it to "Volumes". Now I can't find it.

I was unable to access migrate assistant to restore my hard drive. Out of desperation and ignorance I opened up Time Machines space page and selected my most recent backup and pushed restore. The system accepted it and said it would intall in in "volumes". I was unable to figure out what that meant but I went a head a tried it. The download took four hours and then puff it was gone and so was my data. I can't find the back up anywhere. The only thing I think it might be is that I had named the hard drive a different name than the original (don't ask me why). Have any ideas?

Choose Go to Folder from the Finder's Go menu and provide /Volumes/ as the path.
(71792)

Similar Messages

  • When I plug a LaCie external hard drive into my new Mac mini, [os 10.9.1], to use with Time Machine it effects the performance of my internet and email. Turn off Time Machine and unplug the hard drive and the internet and email are working normally again

    When I plug a LaCie external hard drive to work with Time Machine into my new Mac mini, [OS 10.9.1] it drastically effects the performance of the internet and email, turn off Time Machine, unplug the hard drive, internet and email go back to normal. Why?

    Maybe:
    http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference

  • I had to restore my 2006 MacBook Pro back to factory settings (Tiger 10.4). Can I use my Time Machine back up from Snow Leopard to put it back the way it was?

    I cannot locate my Snow Leopard disks but I was able to use the Tiger disk that came with the computer to restore it. However, it completely erased it and set it back to Tiger. Can I use my Time Machine to put Snow Leopard and my data back on the computer?

    You can't restore a Time Machine backup made with Snow Leopard onto a system with Tiger. You can, but you will damage Mac OS X.
    In order to restore your Time Machine backup, you should have your Snow Leopard disc. Then, insert it and hold the C key while your MacBook Pro is starting. Finally, choose your language, go to Utilities menu (on the menu bar), choose the option to restore the backup and follow its steps, so you will recover Mac OS X Snow Leopard

  • I have my complete computer using Lion backed up on the time machine. Then I installed Mountain lion. I do not like it at all. Is there a way I can remove ML and put my old Lion system back pin my computer?

    I have my complete computer using Lion backed up on the time machine. Then I installed Mountain lion. I do not like it at all. Is there a way I can remove ML and put my old Lion system back pin my computer?

    If you have got a backup, press Command and R keys in boot and restore an old backup. You can install Snow Leopard and upgrade to Lion if you haven't got the backup

  • I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

    I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
    Please I'll be thankfull.

    I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through.  Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while.  My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much.  That's why I was hoping I could use the migration function piecemeal.  I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

  • My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software.

    My external hard drive (1TB WD My Book Essential) suddenly has no room to backup with Time Machine! I am using Maverick OS and wondered if it is because of a bug in the system software. I purchased a new external drive with 3 TB and wonder if I will run into a problem installing it. I don't know how to transfer my files from the previous HD to the New one. I was told to use a cable, but how do I do it? Do I connect them both to the computer and drag the old into the new? How is it done?  Why did this happen, the overloading of the Time Machine?

    Why has the TimeMachine drive run out of space?
    With the limited amount of information you've provided it is hard to answer this question. TimeMachine should continue making backups until the drive is full and then it should erase the oldest backup(s) to retrieve enough space for the next backup. Unless your computer's hard drive has close to 1TB of space on it, you shouldn't see a message saying TM cannot backup because it is full. However if you do have more than 500GB (1/2 a TB) then I can see how that message might occur. Also, if you are using the TM drive for double duty (backing up more than one computer or storing data other than TM) you could get that message.
    Will you have this problem with a 3TB drive?
    I always recommend that people look at how much they'll be backing up in total, add a bit extra for the future, and then multiply that by at least 1.5 and even better to double it. That indicates how large the TM backup drive should be. The TM drive should only be used for TM backups. It is ok to use one drive to back up  more than one computer but if doing so, add up the contents of all the computer drives, adjust for the future and then double it.
    Moving Forward
    Disconnect the old TM drive for now. Connect the new drive and let TM do its job. I don't recommend that you try to transfer the TM backup from the old drive to the new one. Keep the old drive around for a couple months just in case you find you need it and then after a few months, if you like, you can erase it and use it for something else.

  • How come that the time machine backup takes 5 days to sync 200 GB over the ethernet?

    I'm really not happy with the backup speed of the time machine. it has been 1 day and half that it is syncing and for now just 36GB are done of 210GB.
    The remaining time estimation is ridiculous around 5 more days?
    How come this is possible?? I cannot move my mac pro anywhere else it needs to be plug-in 24/7 to the Ethernet and power, of course hoping that everything goes already during these 5 days to backup.
    I've tried different things, I've check my disk for issues also for permission issues none existed.
    I've tried to restart the backup from scratch, even some times it start fast it slows down to a very low transfer rate, and now the current rate of transfer is around 1KB or lower :S
    The soul purpose of the time capsule is to do backups but at this speed rate it's useless, and from what I saw it happens to other people.
    I must have being doing something very wrong, can anyone help me or give me suggestions?
    Regards
    P.S. Mac pro 13'' early 2011 with 8 GB, Mac OX 10.7.5

    The latest update to Lion.. 10.7.5 added slowness of TM as a new feature.. (There are no bugs just features).
    Until Apple sort out their beta testing I would recommend a different backup software. CCC, SuperDuper, Chronosync.
    The issue from reading the various posts is affecting everyone.. including people using external drives.
    Welcome to the new Apple beta program.

  • HT1178 I have set up Time Capsule to use with Time Machine.  When I open Time Machine it 'cannot find' the Time Capsule and I have the Select the Disk each time.  In the Next Backup tab it always says "When disk is connected" even though the disk is alrea

    I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.

    Your pro doesn't matter.. I presume it is happily working.
    Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
    Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
    You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
    There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
    This is the most relevant I think. http://pondini.org/TM/B6.html
    But look at the whole section B setup problems.
    http://pondini.org/TM/Troubleshooting.html
    If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
    Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
    See if you can get Pondini to respond.. !!

  • HT3231 Migration assistant doesnt see external hard drive

    Mac OS 10.7.5  Intel 2 gHx Core 2 Duo.  Just replaced a crashed hard drive.  Migration assistnat doesnt see external hard drive, although it is on desktop and working fine.  Connected by USB.  I have a backup on the external drive.  Too large to place on internal hard drive.  So frustrating!  I looked at forums online, no help.  Any ideas?

    1.  Definitely 10.7.5
    2.  I'm not convinced it is a TM drive.  It has been used as such, but I am not sure of its current status.  Of note, Time machine is currently using it, but I get the sense that it only uses part of the drive.  The file I want to use is in a seperate directory of the external hard drive than backups.backupdb, where Time machine is currently writing.  The file I want to use is called "Untitled - 2012.01.16-10.17.00.766.FullBackup" and the file type is package.  Of note, Time machine let's me have the option to restore the stuff it has been writing for the last few days.  Migration assistant, however, is not so cooperative.
    3.  I have been opening migration assistant, putting in password, choosing "from a Time machine backup or other disk", and then it shows only "Mac OS" as an option under "select your system". 
    Thanks for your interest and help!

  • Firefox does not load 1/2 the time and in order to open it I have to reboot my computer. Please help, I do not want to use Bing or IE.

    When I click on Firefox to open the browser window nearly 1/2 of the time it never opens. It shows that it is trying to open and then it does not. No matter how many times I click on it it will not open unless I reboot my computer.

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Check for crash reports;
    In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
    have '''BP''' in front of the numbers, click it and select '''Submit'''.
    Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
    '''copy''' them. Now go to the reply box below and '''paste''' them in.

  • I spent  two hours downloading Elements today and now I can't find the program on my computer.

    Where is it???

    I believe so but that would be a question better asked in the Photoshop Elements forum.  You can post your inquiry to the Elements forum at http://forums.adobe.com/community/photoshop_elements.
    If you are still facing difficulty with the download of the trial software then please try the directions listed at http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l.  Please make sure to complete the Very Important Instructions section prior to scrolling down and clicking on the download links.

  • How do I use a backup of my previous system in migration assistant from an external hard drive?

    I had to redo my system completely because Snow Leopard broke my Parallels and then when I went back to Leopard my entire system got all screwed up. So I archived and reinstalled Leopard. Transferred the entire Previous System file to my external hard drive then erased and installed a fresh install of Leopard then upgraded to Snow Leopard. Now I'm trying to restore my Previous System on my computer and I can get the Macbook Pro to recognize the external hd in Migration Assistant and in Disk Utility it appears I would have to transfer section by section. I'm trying to prevent that. I don't have money to buy Super Duper or anything else at the moment so Migration and Disk U. seem to be my only options unless you know of anything else.

    Carbon Copy Cloner or SilverKeeper - CNet Downloads or MacUpdate.

  • I have a 27" imac (intel) my hard drive failed and I installed a new one. This is my first time dealing with this so I am having trouble re-installing the OS. Install disc spits out and ? mark with folder appears what am I missing?

    Like the title says. My 1 TB drive failed and unfortunately my computer isn't covered on the replacement program even though my hard drive is the one they are claiming to replace. So that is not a solution just to get that out of the way. So I replaced the hard drive. What I am having trouble with is re-installing my OS. I have 10.6. When I load it and restart it just spits it out and I get the question mark folder. What am I doing wrong is there a step I'm missing? I did do a back up to my Time Machine before the crash. Can I plug it into it and reload format? I'm new to this so any help would be appreciated.
    Thanks!

    Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
    If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

  • The Time Machine backup of my photos is a lower quality than the originals?

    I recently had some problems with my mac and ended up deleting my iPhoto library. Fortunately, I had a Time Machine backup that was only missing a few months. When I recovered the iPhoto Library from my Time Machine and loaded it into iPhoto, I realized that the pictures are in a lower quality (almost like thumbnails of the originals). Is there something I may have done wrong, or is there anything I can do to get my original photos back?
    Any help is greatly appreciated...

    Try right clicking on the iPhoto Library and "show package contents" it's really a folder and inside should be a folder called Originals.
    Copy this folder out onto the desktop and then delete the iPhoto Library, then restart iPhoto and reimport the Originals.

  • On my Mac, in , I can't find the bookmark file-nothing by that name. Want to drag into Mercury App on iTunes to download to my iPad! Where do I find the file?

    I can't find the Firefox bookmarks file on my Mac. Have looked in Application Support/Firefox/Profiles/[the only one.default].I should be looking in the correct spot, as described above. Firefox for Mac has no facility to "export" the bookmarks either.
    Running Firefox 5.0 with Snow Leopard.

    Exporting bookmarks to an HTML file
    https://support.mozilla.com/en-US/kb/Exporting%20bookmarks%20to%20an%20HTML%20file
    How to set up Firefox Home on your iPhone
    https://support.mozilla.com/en-US/kb/How%20to%20set%20up%20Firefox%20Home%20on%20your%20iPhone
    Check and tell if its working.

Maybe you are looking for

  • Sending email to multiple address using Utl_Smtp

    Hi, I want to send email to multiple address using the Utl_Smtp feature. When I am sending email to one email address in the To:Field it works fine.However, when I send to multiple address I am getting the below error.I am using a table(Email_test) t

  • PDF simple vectors look OK in Preview, distorted in Adobe Reader?

    I am working on a document in Illustrator CS5 on Mac OS 10.5.8. The doc is meant to be viewed primarily through e-mail, possibly printed to a desktop printer. I am replacing certain letterforms with vector objects – basically, I'm using simple rectan

  • Debug/Trace a proxy client?

    Hi, I've created a proxy client and logical port to consume a web service in SAP 6.40. However, I'm getting an error upon testing from SAP that one required field in missing; I'm not getting any error when I test from WFETCH. Is there any way to deco

  • How to call a session variable into sql?

    for example, I have a coldfusion session variable - session.testvar I am writing a Stored procedure in sql server 2000. The query within my stored procedure needs to insert a value into a table. The value needs to be my CF session variable. I have no

  • Can I more iweb pages to wordpress

    Can I move iweb pages to wordpress