I was updating my 4th gen ipod and it got disconnected now it is stuck at an apple screen with and empty bar below it and wont change

i need help i was updating my 4th gen and it got disconnected now its stuck at a screen with an apple and an empty bar below it

Do a hard reboot (Hold home and power until Device reboots) and attempt the restore again.

Similar Messages

  • HELP! My cord failed during sync and now my phone is stuck on the Apple symbol with an empty bar underneath it and iTunes won't pick it up at all. I can't tur off my phone to reset and just letting it be dosen't seem to be workig either. What's wrong?

    My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?

    My cord failed during sync to an update and now my phone is stuck on the apple symbol but there is a empty bar under it. I tried to turn off the phone but that didn't work and the iTunes onn my computer isn't picking up the device at all. Whats wrong? How do I fix it?

  • TS1363 i just updated my 4th gen ipod touch with ios 6.0.1 and cant get my email to work

    i just updated my 4th gen ipod touch with ios 6.0.1 and can't get my email to work anymore

    See:
    iOS: Unable to send or receive email

  • HT201210 I am trying to update a 4th gen ipod touch to version 6.0 but keep getting "connection cannot be made" errors. I am connected to internet. It is the first time i have updated/synced with my new laptop since getting it for xmas.  my iphone has wor

    HELP
    Help needed to update a 4th gen ipod touch running version 4.3.5 (8L1) to the latest 6.0 version.  When I connect and try to update i keep getting a box which states that a connection error occured and I cannot update.
    I have been given a new laptop for xmas which runs on windows 8, and the new itunes version (which is in itself a hurdle as I am a technophobe!) and this is all becoming a bit fustrating. 
    I have connected, updated and synced my iphone successfully, but just hit a brick wall on the ipod.  (which incidentally maybe where this laptop will end up!!)
    Help if you can, but in laymans terms.......

    Thank you for you input so far.....
    I think we are getting nearer to the solution sort of!
    Let me get this straight...... I have paid for content on itunes, bought the apple devicds in order to play said content, now I have to subscribe $25 for the privilage of playing MY library content on MY other devices. Which wasn't such an issue to do before the new and improved itunes version!!
    Have I got that correct.  I think I cannot associate my other iOS devices with my library because I am unwilling to pay further through the nose!!!???  or am I missing something?
    Thanks
    Frustrated even more now!!

  • If I update my 4th gen ipod to the iOS 5, will I lose the data on my apps?

    If I update my 4th gen ipod to the iOS 5, will I lose the data on my apps?

    If everthing goes as planned, your app date wil be restored to the iPod. To help guard againste a possible mishap. sync (iTunes also creates a backup) the iPod before the udate and caopy the backup file to a save location in case something happens.  The backup is located here:
    Where iTunes backups are stored on your computer
    The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • HT4623 How do I update my 4th Gen iPod if it doesn't give me an option to do it on the general settings?

    How do I update my 4th Gen iPod if it doesn't give me an option to do it on the general settings?

    Read the second half of the article you linked

  • HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Or it could be an Apple problem and you will have to wait.

  • HT4623 My iphone had an error while updating and is now locked up on the apple screen with the progress bar

    Itunes was updating my phone from 6.01 to 6.1 and it came up with an error. I closed the error not thinking about it and now my phone is locked up on the apple screen with the progress bar on it.

    hi i tried to update my iphone 3gs from ios 4.1 to 6.1.2, while doing the same i got an error message (-5000) which i ignored an continued. it was almost about to complete while my itunes is not able to detect the iphone kindly help.

  • HT4623 I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.

  • HT4623 so i downloaded the iOS 7 onto my computer. then wanted to upgrade. iTunes is waiting to connect to the phone after the restart. now it's stuck in the black screen with the white apple with the progress bar. then i look to iTunes and found out it s

    so i downlaoded the iOS 7 onto my iTunes. then i wanted to upgrade. the phone is stuck in the black screen with the white apple and the progress bar. next time i click on iTunes, it says my phone "has an error and cnanot update" and now it is stuck on the black screen with the white apple and the progress bar almost finished. hasn't moved in 20 minutes.

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • After Update to 10.5.8, stuck on Grey Apple screen with turning gear...

    After Update to 10.5.8, stuck on Grey Apple screen with turning gear... and it just stays there...
    Apparently I can't safe mode it
    Started it in verbose mode and it say disk02 i/o error
    Then I restarted it in single user mode, did a sbin/fsck -fy and it says that:
    *files have been modified*
    *REBOOT NOW*
    I reboot and still the same problem.
    When I put in the install disk it says *cannot install in this drive* (was thinking about archive and reinstall, but I suppose not ) then when I repair and verify, it says All seems OK
    Yikes. Yikes!
    Please help.
    Message was edited for additional clarity by: BrzrKrk

    Well, I brought to the Apple Store's genius bar. Can't say enough about the experience... they archived and reinstalled... tried everything else and like sometimes happens, transfer of data can become corrupt in a spot that just makes things go haywire. So the Archive and Reinstall worked like a charm.
    Moreover, they replaced my Macbook's top board casing (don't know what else to call it..) (where you rest your hands to type) it was cracked and stuff... not under warranty, but they will replace it free due to design ... I am impressed and pleased... *and me? I am a cynical critic* still, they made the experience as painless and certainly pleasant as possible.
    For all who are having problems, I urge you to not damage the wall any further with continuous headbanging: make an appointment and definitely visit the Genius Bar. Your head will thank you

  • Update got interrupted now it is stuck on an iTunes screen but won't go any further

    Update of iPod touch got interrupted now it is stuck on an iTunes screen?????

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

    my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?

    hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?

    put the phone in DFU mode (do a search for how to do this) and restore to the latest firmware. you may have to download the firmware from apple and when selecting restore or update in itunes press the shift key and select the firmware.
    Hope this helps

  • My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
    My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Maybe you are looking for