I was updating my ipad software and it appears to be frozen?
I was updating my ipad software and it appears to be frozen?
If you think that update completed and the iPad froze afterward, try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you see evidence on the screen indicating that the download and install is stuck, like the white progress bar has no moved for quite some time, you will probably need to restore using recovery mode.
You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Similar Messages
-
Just loaded recent update to IOS7 and the screen appears to be frozen with itunes logo and what appears to be the charger connection displayed. Is this normal and how do I get it unfrozen
The display is telling you to connect the device to itunes, some error occurred and you'll need to restore from itunes. If the device is really frozen, it can't connect to iTunes or do anything else, then reboot it...
press and hold the home and power buttons until the Apple icon is displayed, then let go. -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My phone was updating the new software and now will not turn back on, what do i do?
my phone was updating the new software and now will not turn back on, what do i do?
Never fear, help is here jpeterson4! Have you attempted to plug your device into your home computer? Have you verified that the device is charged? Does anything appear on the device when you plug the device into a charger? Please keep us posted, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
Hi, I have just tried to update the iPhone software and it appears to be updating but the screen on my phone has had the same picture of the apple and its at the same spot of loading (about 3 quarters) for the last HOUR!! help!
oh and the device is not being recognised by itunes now either.
-
I tried to update my iTunes software for my iPad. I got the above message. iTunes did not install and now I no longer had iTunes at all. I can't update my iPad software without it.
I have tried Revo, CCleaner, COMODO, "find" in Regedit. Nothing finds anything related to Apple Software Update.okay, download and install the Windows Installer CleanUp utility and use it to remove the installation configuration information for your Apple Software Update:
Description of the Windows Installer CleanUp Utility
reboot the PC after using CleanUp. any joy with the itunes install now? -
I was trying to update my ipad software to IOS ver 8 but it was hung and I could not even power off
I was trying to update my ipad software to IOS ver 8 but it was hung.
iTune prompted me to enter password as it could not be connected but ipad is hung.
Tried to power off to restart but could notHave you tried resetting your ipad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
as i was updating my ipad 2, it told me that it failed to restore, and then it wint come up under devices on itunes, the ipad also wont work, what can i do ?
This was copied from the Apple support site concerning unresponsive iDevices.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode.
More than likely, you will have to restore the device now. You may need to use recovery mode as mentioned in step 3.
Here is the link to the support article.
http://support.apple.com/kb/TS3281 -
I was updating my iPad 2 to the latest version, I have never updated before. It was done downloading and was backing up. Error in backing up (-5000). I tried restarting, no help. Someone please help.
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.
-
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
I was updating my Ipad because it prompted me to for IOS 7 and 2/3rd of the way my Ipad Jammed and told me to plug in to Itunes to restore. Now I get an Error #3194 and my Ipad is unusable. Help!!!!!
What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808 -
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.
Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.
-
Was updating my ipad with a new version of ios without it was plugged in and now it is showing me an arrow pointing to iTunes. Can you please help me power on bach my ipad
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.
Maybe you are looking for
-
NB200 - C000021A error and blue screen appears
Hi folks, I am having this following problem with my mothers notebook a Toshiba NB200-10g. Basically it's had a virus or a few viruses the last few days. Downloaded avg and malwarebytes hoping to solve it and it found problems but pop ups were still
-
How to calibrate analyseur HP 8753E with Labview??
ghabri Envois : 1 0 Compliments Driver instrument pour la calibration du HP8753E sous labview Driver instrument' for the calibration of HP8753E in labview Bonjour, Je suis entrain de développer une interface utilisateur sous labview 8,5 pour interfac
-
No sound in videos problem!
Ever since I updated my desktop Mac with Mavericks I have been having ongoing issues with movies I have on my Mac. They were originally downloaded as (.avi) format however with the new Mavericks these videos go through a conversion process turning th
-
Changing log file name (weblogic.log)
-
WCF_SQL Receive Location auto disabled after sometimes
I'm aware that WCF_SQL receive location will auto disable itself after sometimes if the configured DB server it's connect to becomes unavailable (in my case, some weekly maintenance that could span 1-2 hours on the DB server). I want to know if there