I was updating my iphone 5 and stopped half way .what do i do

updating my iphone 5 and stopped half way .what do i do

Hold down the home button and the on/off switch until the Apple logo
appears. Ignore the red power off slider if it appears.

Similar Messages

  • I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

    I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

    I did call apple care and they guided me through everything..  they said it was the hardware
    I was given this phone last year as a present
    i know, it was not new.. so it could have been on an other cell provider  i am not sure if it was so at the moment that is all i can do

  • HT4623 Plse need assistance urgentlu I was updating my Iphone and coudnt finish the phone software

    Plse need urgent assistance. Was updating my Iphone and when was installing the Iphone software a problem left my Iphone with the apple icon and can not reinstall it.

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Also, if the Device has been Modified... this will Not necessarily work.

  • I was updating my iPhone and it is stuck.  It won't complete the update and I cannot turn the phone off or use it at all.  How can i get it unstuck?

    i was updating my iPhone and it is stuck.  It won't complete the update and I cannot turn the phone off or use it at all.  How can i get it unstuck?
    i'm wondering if i can use my macbook pro to override the update that  is incomplete.

    What does this have to do with Classic operating systems?  They won't run on a Macbook anyway.
    I've asked this thread be moved here:
    Using iPhone

  • I was updating my software and my computer froze what do I do?

    I was updating my software and my computer froze

    Hi brunoglz,
    If you are unable to find iTunes after an interrupted update, you may find the following article helpful:
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    - Brenden

  • Homesharing on my iphone 4s stops half way

    Homesharing on my iphone 4s stops when it come half way? What do I do wrong? :-) I have restarted router, logged in and out of homesharing on all my devices and macs. (I have a huge music library) Regards Tor

    When I looked closely at my music I noticed not all Artists or albums were displaying.
    Closed iTunes
    I looked in the iTunes folder on my computer and apart from the files
    Itunes Library Extras.itdb
    iTunes Library Genius.itb
    iTunes Libray.itl
    ituned Music library
    there were some other xml files as well. Deleted them and restarted itunes and looked in shared on my iphone 4 and everything was there

  • I have a ipad 3 with ios 5.1.1 and it will not update to ios 7. I keep getting a software failed message and the download takes 13 hours and stops half way through. Any help?

    I have an ipad 3rd gen with ios 5.1.1 and I can not update it to ios 7. It will take 13hours and when I try it stalls out halfway through and says software update failed. I have tried everything. Any help?

    it actually needs more space than that.  The file size is your 65 mb is probably the ota incremental file size.  The full package is 700 mg, and the system needs 3 gig of free space to unpack and install.
    There is a fairly good discussion here
    https://discussions.apple.com/message/23680750#23680750

  • HT4623 I was updating my iphone and an error occurred which has caused it to it to get stuck on itunes

    My iphone got stuck on itunes with a usb plug with an arror pointing?

    Connect your phone to iTunes.  You will probably get a pop-up telling your it detected your phone in recovery mode and that it needs to be restored.

  • TS3694 I was just updating my iphone and seen a massage that there is an error in updating and iphone is collapse showing only data card and iphone picture on screen

    I was updating my iphone and seen a massage there is an error in updating and after  switching from computer iphone is not restarting showing a picture of
    data cord and itunes.
    now how to resolve the problem.

    This will help
    plug into iTunes and see here
    http://support.apple.com/kb/HT1808

  • TS3212 hi my iphone was updated to IOS6 and now it wont play my music it just scroles through all the titles please help

    my iphone was updated with IOS6 and now it wont play any of my music it just svroles through every song and wont stop i turned it off using the twin keys start and turn off but still no help please can some one halp me this apple softwear is crap

    Hi alicia243,
    Thanks for visiting Apple Support Communities.
    If your iPhone wont power on, I recommend going through these steps first:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    I was updating my iphone, but my computer shut down half way through restoring my old settings. When I turned my computer back on, i tried to continue with the restore but the original backup i was trying to use wasn't there anymore, it had been replaced.

    Try resetting the SMC.
    MacBook and MacBook Pro with a battery you can remove
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer
    To reset the SMC on newer Mac portables with a battery you cannot remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I was updating my iphone 5 with 7os and now it is telling me to restore my phone to default??? i am going to loose all my stuff Pls help me

    OMG!!!! I WAS UPDATING MY IPHONE 5 WITH 7OS AND NOW ITS TELLING ME I HAVE TO RESTORE MY PHONE TO FACTORY SETTINGS... I AM GOING TO LOOSE EVERYTHING... PLEASE SOMEBODY HELP ME

    OMG.  STOP SHOUTING!
    I can't imagine being foolish enough to update the iOS on their iDevice without making a backup of their data.  Once the phone is back to factory settings, restore it from the backup you made right before you updated.

  • I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of y primary. How can I change it back to my primary account?

    I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of my primary account. How can I change it back to my primary account?

    Hey bjboles,
    Welcome to Apple Support Communities.
    The article linked below describes what to do after changing your Apple ID, but you can use it as a guide to resolve the incorrect Apple ID account information entered issue that you described.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Ciao, 
    -Jason

  • I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
    Read:
    http://www.apple.com/support/iphone/assistant/restore/

  • I was updating my iPhone 4 to iOS 7 and while updating there was an error and the only way toturn it back on is restoring it. is that the only way?

    I was updating my iPhone 4 to iOS 7 today and before I did, I backed my phone up into iCloud. Then while it was updating an error occured and now itunes is telling me the only way to power up my phone is to restore the whole device. Is it possible to power up my phone without restoring the whole device? Or without loosing everything?

    Not if the error says to restore in iTunes. You should have made a backup before the update, so you should be able to restore to that backup. But with the device in recovery mode as it is, there is no way to backup anything at this time. If you did not make a backup before updating then you can only restore to your latest backup, whenever that was. If no backup at all, then you will have to restore the device as new, losing everything.

Maybe you are looking for

  • Setting profile option values using Java Concurrent Program

    Hi, I have a java concurrent program in which i am trying to update a profile option which is enabled only at site level, but the values are not getting committed once the CP completes. 1. I am using CpContext.getProfileStore().SetProfile(<name>,<val

  • Gestures intermittent in Lion

    I have a Unibody MacBook Pro 15" 5,3 Mid 2009 3.06 GHz 8GB RAM. Using 1Mac OS 0.7 Lion. Multitouch gestures are working intermittently. Switching between desktops and full screen apps (3 finger left right swipe) and bringing up Mission Control (3 fin

  • Document Search (how to do?)

    I would like to create a report to enable a user to search through documents posted in content areas. EG: the user can enter a string and the report would return the URL of all the documents which contain that string in the document name, or better y

  • Valuation Price in Material Price

    Dear All, If we maintain the Material Price in Finished Goods Material Maters ex; 100/- .  If  after running ck24 it updated 150/-, after running the prodution order confirmation it would be 180/-  then what will be affect from fi side. my question i

  • NT-realm status in WL 5.1 SP4?

    1. Can it run on a non-PDC? 2. Can it work with trusted domains? I'm sure others out there are curious as well... Thanks, Christian