I was using 3G in my iPad 3, after few days the 3G icon dispeared and instead E icon appeared and my internet is working slow with this E
i was using 3G in my iPad 3, after few days the 3G icon disappeared and instead E icon appeared and my net is very slow with this E icon
Did you Check in settings - cellular data that 3G is enabled? Menus could be named slightly different since I use iOS 6.
Similar Messages
-
my ipad 2 says "cannot get mail the username or password for sky is incorrect" but it is correct. My BT mail is fine. HELP
Try deleting and recreating the account on your iPad.
-
I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of. -
ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Visited links using Safari on my iPad 2 won't stay the "visited" color
Visited links using Safari on my iPad 2 won't stay the "visited" color after I close the tab, put the iPad in sleep mode (or whatever it's called), or when I power off the iPad.
There are certain sites I visit where it comes in very handy to be able to see which links I've already clicked on. The links will stay the "visited" color during the time I'm on the site, but later they all go back to the "unvisited" color.
Is there any way I can fix this on an iPad?Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Help! I used to upload photos via ios and it was always published up to my 5th photos, but on the 6th, it just go to ios photos album and was not published on my fb's timeline...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Hello everyone !
As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
I hope you can help me.
Thanks,iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Anyone out there that can maybe help. I was using my 5s to record my meeting minutes for the first time and clicked cancel cos I wanted to continue recording and instead deleted it all! :( anyway to get it back?
The other Allan is being facetious--you somehow found the forum for pre-2006 eMac desktop computers that gets little traffic.
Getting you moved to the iPhone forums. -
i was using my bros account for icloud, he changed & forgot the pass now i want to sign out & put mine but i'm not able to do that and he couldnt recover bcz he did it long time ago and apple support are not sending a recovery email to his email... what shall i do now to sign out?
Tell him to contact the Apple account security team for his country and ask for assistance changing the password: http://support.apple.com/kb/HT5699. If his country isn't listed, he can try contacting iTunes store support by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.
-
i have dowloaded the newest version of IOS 7.1.1 today and i forgot the initial apple ID that was used to setup my phone, how can i solve the problem?
Hi Ghassan8727,
If you have forgotten the password to the Apple ID that was used to set up your iPhone, you may find the following article helpful:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden -
My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.
When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer. -
My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance
I'm trying to restore my iphone by using the recovery mode. But it always seems to run out of time, any idea why is that? Thank you again
-
I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?
Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef -
I am trying to use a website that requires that my computer have the latest version of Java, which I have updated and installed Java 7 Update 51 (64-bit), however Firefox does not recognize that I even have Java on my computer. My computer is 64-bit
When I run "Verify Java Version" it show nothing is installed... but it is, I know that for a fact because it shows in my "Control Panel/Programs/Programs and Features".
When I go back to the Java Download page, the following message is visible:
"We have detected you may be viewing this page in a 32-bit browser. If you use 32-bit and 64-bit browsers interchangeably, you will need to install both 32-bit and 64-bit Java in order to have the Java plug-in for both browsers."
My question is this:
Is there a way to change my Firefox browser from 32-bit to 64-bit.... because it appears that this is way Java is not functioning properly?Firefox needs 32-bit plugins, so you'll need to install 32-bit Java for Firefox.
No, you can't change Firefox from 32-bt to 64-bit. There is a Nightly 64-bit version (alpha) of Firefox, but it is used only to test for regressions until development is resumed. -
I can't be the only person who has this problem with iCal- when a month ends on a Saturday I can't drag events into the next month and instead have to cut and paste - a real pain in the butt. I thought there was something called "scroll" but I can't find that.
Yeah that works, but, it involves a click on the event, a click on edit, a click on the date, keystrokes, plus, since you can't see the next month you have to have a calendar in front of you so as to put it to the right date. It's easier just to cut it and advance the month and paste it, once you are in the right month you can move it around helter skelter willy nilly no problems. Although now that you mention it I will try it, maybe it is easier than cut and paste as I don't really care about the date, as long as it gets moved into the right month I can drag it around all I want.
Maybe you are looking for
-
Hi, I would like to know what suffix I need to put on my movie file so that I can use it in iMovie or iDVD. The movie file has .avi on it and can be read on Windows Media Player but I cannot get it into a file on the MacBook Pro such as iPhoto or iM
-
Error While creating Application server connection
Hi , I am a newbie to SOA suite . I have installed Oracle XE Database , Oracle Jdeveloper 10.1.3.3.0.3 and Oracle SOA Suite 10g (10.1.3.1) ( file name soa_windows_x86_ 101310_disk1.zip) on my windows XP machine Now I created a "Hello World Bepel Proc
-
Acrobat X crashes when trying to Access XMP
Whenever I try to access additional metadata from within the properties dialog acrobat hangs and then crashes. I tried removing my old XMP templates and restarting the app, but that has not helped. Any thoughts? Thanks in advance.
-
I am trying to find out some information on Rep design for a customer. The question is, for a given RPD file, with Dim - Date Dimension that is pointing to W_DAY_D (default Calendar Data), can the Source in RPD for Dim - Date Dimension be changed to
-
Desktop won't display after login window
Hi, I'm trying to help my sister in-law with her computer (PowerBook G4). She claimed it was having a lot of problems and thought a clean install would fix things. However she had lost her install discs, and now I've seemed to make things worse. I st