I web and shops

Hi All
sort of just found iweb on my mac only because i wasn't looking for it before and i just wondered if it is possible to add a shop to it as i am thinking of setting up a website for my wife who makes greeting cards etc
i can see that i will be able to display the cards she makes but i am wondering how i can get people to purchase on line
i am very new to building a website ie never done it before in my life so please go gentle with me
thanks in advance
eon

One way to have an online shop would be to hyperlink from an iWeb page to a free, web-based shop such as this one at Weebly:
http://blog.weebly.com/2/post/2009/05/announcing-weebly-e-commerce-features.html
...Or, instead of using iWeb, you may find it easier to set up your whole website in Weebly.

Similar Messages

  • BOB shop XCM and shop admin settings document

    Hi
    We need to configure the BOB shop. I know that XCM settings link for b2b and BOB is same.
    https://<server>:<port>/b2b/admin/xcm/init.do
    In shop admin, we create shop for b2b business scenario: http://server.domain:port/shopadmin/shopadmin/init.do
    Kindly share any help document or SAP note for XCM configuring of BOB shop for CRM system. Also kindly share what link can be used to access the BOB shop, as we have below link for
    https://<server>:<port>/b2b/b2b/init.do
    Also i have one doubt, on one XCM Url, can we maintain xcm settings for both B2B and BOB?
    we have a requirement of creating 4 web shops. 2 B2B and 2BOB. Do we have to maintain different server and port for each webshop?
    Kindly help!
    Thanks!

    we have a requirement of creating 4 web shops. 2 B2B and 2BOB. Do we have to maintain different server and port for each webshop?
    Maintain a scenario each for b2b and  bob. Then maintain the appropriate shops - 4 of them. Be sure that the shop basetype are appropriately chosen.
    With one custom application (my_b2b) you can execute all the four different combinations with the URL parameters - scenario.xcm and  shop
    1) <server>:host/my_b2b/init.do?scenario.xcm=my_b2b&shop=b2bshop1
    2) <server>:host/my_b2b/init.do?scenario.xcm=my_b2b&shop=b2bshop2
    3) <server>:host/my_b2b/init.do?scenario.xcm=my_bob&shop=bobshop1
    4) <server>:host/my_b2b/init.do?scenario.xcm=my_bob&shop=bobshop2
    You can work diligently with your systems group to create URL / reverse proxies / forwards for the external customers so that they don't explicitly give the URL parameters.

  • Photoshop CC closes or freezes when saving in save for web and devices

    Hello,
    Since I have a new laptop with Windows 8, I couldn't get Photoshop CS6 anymore, so I downloaded PS CC.
    It's working great the last days, but since yesterday PS freezes or closes everytime I try to save a .gif in save for web and devices.
    It drives me insane...
    I hope someone can help me.
    Thanks in advance.

    Trash the Save for Web prefs in the respective folder (C:\Progrom Files\Common Files\Adobe or your user home directory).
    Mylenium

  • Empty report returned from WEBI and Crystal report when using external hier

    Hi,
    WEBI and Crystal report build from BEX query returned empty report when we used external hierarchy 0PROFIT_CTR.  In BEX we don't have any problems with it.
    No authority check is perfomed on the hierarchy when we start the report in WEBI/Crystal. Only check on the hierarchy is performed when the root authorization is assigned to the user

    We using BO4  SP12

  • Poor performance with WebI and BW hierarchy drill-down...

    Hi
    We are currently implementing a large HR solution with BW as backend
    and WebI and Xcelcius as frontend. As part of this we are experiencing
    very poor performance when doing drill-down in WebI on a BW hierarchy.
    In general we are experiencing ok performance during selection of data
    and traditional WebI filtering - however when using the BW hierarchy
    for navigation within WebI, response times are significantly increasing.
    The general solution setup are as follows:
    1) Business Content version of the personnel administration
    infoprovider - 0PA_C01. The Infoprovider contains 30.000 records
    2) Multiprovider to act as semantic Data Mart layer in BW.
    3) Bex Query to act as Data Mart Query and metadata exchange for BOE.
    All key figure restrictions and calculations are done in this Data Mart
    Query.
    4) Traditionel BO OLAP universe 1:1 mapped to Bex Data Mart query. No
    calculations etc. are done in the universe.
    5) WebI report with limited objects included in the WebI query.
    As we are aware that performance is an very subjective issues we have
    created several case scenarios with different dataset sizes, various
    filter criteria's and modeling techniques in BW.
    Furthermore we have tried to apply various traditional BW performance
    tuning techniques including aggregates, physical partitioning and pre-
    calculation - all without any luck (pre-calculation doesn't seem to
    work at all as WebI apparently isn't using the BW OLAP cache).
    In general the best result we can get is with a completely stripped WebI report without any variables etc.
    and a total dataset of 1000 records transferred to WebI. Even in this scenario we can't get
    each navigational step (when using drill-down on Organizational Unit
    hierarchy - 0ORGUNIT) to perform faster than minimum 15-20 seconds per.
    navigational step.
    That is each navigational step takes 15-20 seconds
    with only 1000 records in the WebI cache when using drill-down on org.
    unit hierachy !!.
    Running the same Bex query from Bex Analyzer with a full dataset of
    30.000 records on lowest level of detail returns a threshold of 1-2
    seconds pr. navigational step thus eliminating that this should be a BW
    modeling issue.
    As our productive scenario obviously involves a far larger dataset as
    well as separate data from CATS and PT infoproviders we are very
    worried if we will ever be able to utilize hierarchy drill-down from
    WebI ?.
    The question is as such if there are any known performance issues
    related to the use of BW hierarchy drill-down from WebI and if so are
    there any ways to get around them ?.
    As an alternative we are currently considering changing our reporting
    strategy by creating several higher aggregated reports to avoid
    hierarchy navigation at all. However we still need to support specific
    division and their need to navigate the WebI dataset without
    limitations which makes this issue critical.
    Hope that you are able to help.
    Thanks in advance
    /Frank
    Edited by: Mads Frank on Feb 1, 2010 9:41 PM

    Hi Henry, thank you for your suggestions although i´m not agree with you that 20 seconds is pretty good for that navigation step. The same query executed with BEx Analyzer takes only 1-2 seconds to do the drill down.
    Actions
    suppress unassigned nodes in RSH1: Magic!! This was the main problem!!
    tick use structure elements in RSRT: Done it.
    enable query stripping in WebI: Done it.
    upgrade your BW to SP09: Has the SP09 some inprovements in relation to this point ?
    use more runtime query filters. : Not possible. Very simple query.
    Others:
    RSRT combination H-1-3-3-1 (Expand nodes/Permanent Cache BLOB)
    Uncheck prelimirary Hierarchy presentation in Query. only selected.
    Check "Use query drill" in webi properties.
    Sorry for this mixed message but when i was answering i tryied what you suggest in relation with supress unassigned nodes and it works perfectly. This is what is cusing the bottleneck!! incredible...
    Thanks a lot
    J.Casas

  • Connecting Web and the entire OTC cycle (Part 2)

    I am a .Net programmer and at the same time SAP SD Consultant but just new  to this SAP field. I will be creating a website where the customer orders will be recorded. Based on my research in this forum, connecting a website and SAP will be possible (as advised by the people here - [source|Connecting Web and the entire OTC cycle;).
    Here is my question. If I will create a website that will take control of the entire Order-To-Cash cycle, will I have problem connecting my website to SAP (back and forth), or it will be the problem of the ABAP person?
    I do not have the slightest idea on how to connect to SAP if the front-end is a browser/website. I only know how to program using Microsoft ASP.Net
    Please help. Thanks.

    Hi,
    The problem really depends on where the connection is failing..
    pls check the following and I hope that really helps:
    [http://help.sap.com/saphelp_NW04/helpdata/en/51/d5470940fd564b888f4beb9523fa6c/content.htm]
    [https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/Connecting%20to%20SAP%20NetWeaver%20Systems/Using%20SAP%20.NET%20Connector.htm]
    Regards
    Raghu.

  • I would like to add to the Safari toolbar on my ipad 5 IOS 6  machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

    I would like to add to the Safari toolbar on my ipad 5 IOS 6  machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

    You cannot customize the Safari toolbar on the iPad.
    What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

  • Error message when saving for web and devices

    I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
    I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7.
    It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.

    Hi,
    See if this solution works (from this post):
    regards,
    steve
    26. leonty16,  
      Jun 26, 2010 11:17 AM    in reply to turtle_ 
    Report
    FIXED .....
    OK guys....I had this problem for the longest time & Whenever I tried to use "save to web" feature, I would get the same error.... after a lot of research & finally found a resolution.....
    I wanted to take this opportunity to share the resolution why this feature was not working properly....
    Here is the link where you will find what the problem was...
    http://www.techsupportforum.com/microsoft-support/windows-vista-window s-7-support/235245-solved-error-1324-when-installing-applications.html
    Basically, go to this registry location:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\U ser Shell Folders
    & make sure that your current "my documents" sub folders are set to:
    My Music       REG_EXPAND_SZ         %USERPROFILE%\Music My Pictures    REG_EXPAND_SZ         %USERPROFILE%\Pictures
    My Videos      REG_EXPAND_SZ         %USERPROFILE%\Videos
    Personal         REG_EXPAND_SZ         %USERPROFILE%\Documents
    etc...etc...etc....
    When I fixed my registry...this error went away & I had no problems with it anymore...please post this resolution on the website for others!

  • My itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help

    my itunes can't see my new ipad ..did everything what day said on the apple web and still nothing ..help.....

    What is "everything"?
    First, be sure you are using the most recent version of iTunes.
    Use a different cable and USB port.
    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Help me Decide on OpenBSD or Solaris as my web and file server please

    Hi
    5 questions
    i have been using OpenBSD as my Web and file server for a while now
    and FreeBSD as my Desktop
    i decided on OpenBSD as my Server because of its Security
    1) But now i hear Solaris is the most Secure OS pn the Planet? is this true
    And which is real Unix?
    i seem to always have trouble with things such as PHP on OpenBSD
    Most of my pages run as *.html but i also have a forum which uses PHP 4
    But all my PHP pages come up blank..
    i am always encountering errors using PHP
    2) If i Switch to Solaris will it b even harder to use or
    is it precompiled with PHP 4 and higher when i install Apache
    3) Also what about cgi and the ability to use *.htaccess files should i use them
    4) Also i i still would like to generate SSH keys ssh-keygen
    is that possible?Forcing the user to login using only a key and
    not a password on SSH
    5) Does Solaris have any Linux compatibility as well?as FreeBSD has
    Concider me a newbie even though i use to post on this forum once before
    i am always experimenting trying new things out
    Message was edited by:
    heatherval

    Either will work just fine. Since you're asking in the Sun forums, you should receive more Solaris replies of course! :-)
    The weak point in your setup (as far as security goes) would be the use of PHP either way...

  • Save for web and devices: overlaping slices

    I use Illustrator to design UI for web and applications. In many cases, there are overlapping slices for example the icons on the toolbar: the icons are separate slices with transparent background while the toolbar is a big slice under all of them. Everytime I need to export the slices, I have to hide the background, export the icons, and then hide the icons and export the background. It may not look like a tedious task but when you have to do this cycle 50 times a day together with your product manager and marketing team to fine tune the graphic design, it's such a painful task. Unfortunately it's not always about hiding and showing only 2 layers, it can be quite complicated depending on how many elements there are on the screen.
    The problem only comes down to one question: how to export overlapping slices from different layers easier?

    Window >> Layer comps
    Set this up, and with one click you will be able to toggel whci layers are on or off.
    Out of curiosity, are you programming pages with CSS, dynamic layers or other? You cannot layer slices with transparency on top of each other in standard html. I find it so time consuming and impossible to get things registering correctly for all browsers, so try to minimize any layering technologies.

  • Save for Web and Device Grayed menu grayed out

    Using Photoshop 11.0.1 (CS4) and Mac OSX 10.5.6), I have an action that saves a retouched file first as a high quality jpg and then as a optimized jpg for the web. It has worked fine in the past, but today when running the action I received a warning that the Export command was not available. I tried manually exporting the using the Save for Web and Devices menu item, but it is grayed out and not available. The file is sized to 1024 pixels on the longest side, no layers and in 8 bit mode.
    So far I have done the following:
    Trashed the Save for Web preference file
    Repaired permissions
    Scanned for viruses
    Rebooted the system
    Any other ideas short of a reinstall?

    mcohran wrote:
    Any other ideas short of a reinstall?
    Trash Photoshop preferences.
    Repair Permissions.
    Check on available disk space.

  • Saving Sliced files in Illustrator CS6 like it was in CS5 "Save for web and devices" gone?

    Hello,
    I used to save all my slices in CS5 and it would give me the option to save for web and devices, then when I was in there it would let me choose the option at the bottom Other... then I could go in and save it as a html and images and then it would automatically make div's for me when I brought it in to dreamweaver.  Where did this option go in CS6?  Can someone help I am on a big deadline, and I lost all my work transfering it back into cs5 to try it there like I used to.  Attached is a .png to show what I mean.
    Thank you,
    DariusB
    These options are not here in CS6 and I cant find it.  I would really appreciate the help.
    Thanks again.

    Hi,
    There have been some other changes too - here is the link to the article that describes the changes: http://blogs.adobe.com/ivandavid/illustrator_cs6_save_for_web/.
    Cheers,
    David

  • When I save for web and device in Illustrator, I see all the pixels... What is wrong?

    I have created a vector image. When I save for web and device in Illustrator, the image does not come out clear even if I'm saving the image the same size as the artboard. I can see the coutours (pixels)... I've opened the file on another computer and everything is perfect. What is wrong on my computer?
    I have reinstalled the program and did all the updates. What else can I try?
    Thank you!

    So that you know next time that option is no longer available so to speack it is now under a dropdown wiht the default none then Type Optimized or Art Optimized in CS 5 and operhaps CS 4 as well

  • Illustrator CS5 15.0.2 crash when Save for Web and Devices (Mac)

    Hi baffled with this.
    When Saving for Web and Devices in Illustrator CS5 (15.0.2), the application now freezes and has to be force quit.
    HOWEVER if I delete the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder all works well until I quit the application, then the freeze will happen again. I had this happen before so under the advice of Adobe I created a new user and all was fine for that user so I transferred everything across... a laborious task.
    So my question now is why now?... what has triggered this AGAIN?...
    Hope you can help... anyone.
    Running:
    Mac OS X 10.6.6
    Mac Pro tower.
    Note:
    have uninstalled, reinstalled, updated 15.0.1 - 15.0.2
    have deleted all font caches
    have deleted everything... that could be related...
    HOWEVER have narrowed it down to the 'Adobe Illustrator Prefs' file in the Users/~/Library/Preferences/Adobe Illustrator CS5 Settings/en_GB folder
    Please too note this is not the folder permissions issue, am aware of that and have thoroughly checked all permissions, ran disk utility and disk warrior.
    thanks

    If you use cocktail I suggest you get rid of it it can cause serious problems if you select the wrong settings, instead download ONYXwhich is free and will not harm your system or corrupt anything by deleting something you actually need.
    I hit the wrong setting using cocktail and it locked me out of all of the hard drives installed or connected to my Mac it is very dangerous. And I cannot imagine a reason for a setting that would protect your hard drives from yourself to the point of not recognizing your own password.
    I know it cost money and has advanced settings but having the ability to kill your system is crazy.
    Also to repair your permissions use the disk utility or ONYX as the permissions can become changed when installing software or if cocktail changes it locking you out of folders etc.

Maybe you are looking for