I went to Apple to ask about the Antenna problem and this is what they said
I spoke to their head technician and he said that the problem with the bars going down while you hold the phone is simply cosmetic and it will be fix with am update they are already working on. Furthermore he said that even if you have one bar left it is still the same signal strength you had when you originally placed the call, apparently is a problem that will be fix in the next update. what do you guys think?
Most of these technicians or "genius" have no idea what they are talking about.
I went to the apple store yesterday , explained the problem also spoke to a manager when I realized that the 1st person has no clue.
Long story short they did not want to give me a replacement because they wanted to take care of new customers in the line due to limited supplies.
For that they are willing to ignore us early adapters and loyal customers.
They even asked me to try and get a new SIM from AT&T.
Long story short they are either not trained well or are training to act as if it is not a widespread issue and downplay it.
Similar Messages
-
How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer
You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I ran a virus/trojan fix and this is what it said it could not repair something in the main library core or something like that. What do I do? The problem seems to be with safari?
I ran the utility disk and this is what it said.
Warning permission differ Applications/Safari drwxr-xrx they are -rwxr-xr system/livrary Cores has been modified and will not be repaired.
Permission apllication differ on System/livrary/Pr or could be -rw-r--r-- they are rwxr-xr-x Application/iTune be droxr-xr-x they are rwxr-xr-x
Then I hit fix permissions and it said this
Warning SUID file Systm/Library/Core has been modified will not be repaired
I also downloaded Bitdefender Virus Scanner and it found nothing. -
sir/maam, i am kenneth. i both an ipad for my mom. i register it in icloud. my concern is that wen i restore the ipad, apple is asking for the registered email and password. i forgot those details i put on it that's i decided to ask for your help. only thing i remembered is the apple id that i made for her.
Go to http://appleid.apple.com and click 'Find your Apple ID'. Follow the instructions and hopefully you will be able to identify your ID.
-
I have few questions to ask about the Expert Series and Valet Series
Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as replyWith the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product. -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Fife days App Store not give it to me the verify code, I made I lot email adress, changed and created the new, still the same problem, and this is second iPad that I bought this month, if not help me I don't know how to deal, thank you in advance, maybe I will go to shop and want my money back
Do you have a technical question for us volunteer users?
-
I always download stuff then is suddenly asked for my secureity questions. and i guessed what they were then it kicked me off
how can i re-access my acount and change my secureity questions
-
HT4623 Why isn't Apple talking about the security problem and the iOS software patch?
Why isn't Apple telling us about the iOS security problem and the software patch?
There's an iOS security problem already?
They just issued an iOS update... -
hi all,
I have upgraded my macbook pro 13-inch mid 2010 with
Mac OS X Lion 10.7.5 (11G63)
and now my user account password is not working and i have tried to replaced it with my apple id as described on this web but it's been fruitless, what other option do i have to reset my user account password?
thanksWelcome to the Apple Support Communities
If you can't use your Apple ID to reset the user password, use this alternative method > http://discussions.apple.com/docs/DOC-4101 -
Hi all, please help me reinstall Itunes onto my PC. When i did a pc refresh, it deleted my itunes and microsoft office. I am now trying to reinstall itunes and am getting the following message each time i try run the new downloaded version ( i have tried a few older and the latest one and all show the same message)
the file Itunes cannot be read because it was created by a newer version of itunes. I have downloaded the latest version
Cheers
AndrewTell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
Has anyone received a response from Adobe about this issue?
Has anyone received a response from Adobe about this issue?
-
My home button isn't working well so i went to my service provider to ask about the problem. They advised me to update my iPhone to iOS 5 but the problem is no matter what i do, there is always an error. What should I do?
If you are having Issues with downloading iOS 5....
Try temporarily disabling your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
hi , I faced with a new problem recently while installing a free app.
when I am installing a new free app on my iphone , I'm asked about the way of payment . I check the none option in my apple Id account but it wouldn't be accepted . what should I do ?
regardsYou need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
by asking for the function seek and replace [apple F] i get no display - so see nothing except the upper grey line. what is going on? and what can i do about it?
restarting doesn't workDoes trashing the preferences help? See Replace Your Preferences
Maybe you are looking for
-
Dear members Y would like your help to create an abap routine into the infopackage. I want to obtain last period from current month (sy-datum), for the characteristic 0fiscper at the infopackage those anyone know how to create a routine that do that?
-
Simple state machine Where to begin?
Hello Got a question that is simple for the experienced people here I guess. But don't know where to start..... Here is what I want to try to do: I have got a lot of inputs, to keep the question simple I have only drawn a few of them but eventually t
-
Could you please tell me what to do. - I don't know how to remove the blue rectangles in the header. - there should be a white box for the other secondary info - I want a footer with the copyright in it - I also want a bit more space around the text
-
For the last couple of days my CC apps have been opening in Trial and requesting Authorization. I understand these apps call home from time to time but this has been happening multiple times for each app. Is this normal when the subscription is renew
-
Hi Expert, Please tell me the steps to import a taxonomy table data into MDM using excel as source. I have created Txonomy table,attributes and linked them to classes. Now, I need to fill data into Taxonomy table,Pls guide. Thanks Ravi