I went to bed and in the next morning my mac just didnt turn on
I used to leave my macbook black downloading a lot of stuff in the night, so i leave it downloading a lot of programs and i went to sleep, in the next morning i woke up and i realized that my mac didnt turn on. why???? I went to the mac workshop and tehy told me that it was problem of the motherboard, why??? it had never happened before and i leave it in my desk. Soooo?? What do you think?
I only had one year of warranty, so the first time the problem was the motherboard, ok they fixed my mac, 3 months later i have the same problem the motherboard is death and now i dont have a warranty because it is over, so im in a huge problem and i think this is not fair, i mean it cant happen the same problem twice during 3 months, i think this is a problem of design or something weird, i dont deserve this. I havent finished to pay my mac, this is just not fair. What can I do? I should demand
Similar Messages
-
three of my apps on my ipad keep crashing i just went to bed nd the next morning i went to use one them and it kept crashing i restarted my ipad i deleted and redownloaded the apps i updated my ipad and those three apps are still crashin. i think its something wrong with my ipad but idk what
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign. i tried rebooting and the charging sign just shows up. how can i fix it?
sounds like a hardware issue with the battery
1. you can try different chargers if you have any
2. while plugged in, Hold the Home+Power at the same time for about 20 secs, if the apple comes up then release both buttons
3.if that doesn't work you may have to go into Apple store -
when i connect my iphone to my pc i get "itunes could not connect to this iphone. An unknown error occurred (0xE8000012) i have the correct itunes i also tried to reset my phone, i did this before i went to bed and it was still trying to reset when i woke the next day should it take this long?
http://support.apple.com/kb/TS3221
-
I have two yahoo mail accounts. I went to bed and both were accessible on my iphone. I woke up and one was not able to receive any mail. I have deleted the account and added it back and changed the password. Still does not work. Any help?
Download the yahoo email app, if you already deleted and reinstalled the email account and still have issue.
This is a known issue with Yahoo email account. -
I downloaded/installed a software that came up on the IPad screen and left itrunning until the next morning. When I went to used the IPad next day, I have not been able to restart it. What should I do?
thanks,
hariIf you mean that it won't boot up, then assuming that the battery isn't empty (it can take about 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
The ipad screen has went white and has a gray line running through the middle of it. It worked one minute and not the next. It has not been jail broken.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost. -
I downloaded an album and all of the tracks will play about 3/4 of the song then stop and play the next song. I went to itunes store and it said the songs fully downloaded. So how do I get the full song into my library?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items. -
I went to the One Direction concert August 19, 2014. I took several videos and pictures on my phone and wanted to save storage since my phone is only 16 GB, so right after the concert I put the images and videos on iCloud and deleted them off my camera roll. The next morning I woke up to look at them on my iCloud and every single video and picture was gone. GONE. This was before iOS8 let you recover deleted photos. As a desperate fangirl, please help me out. I've spent months in stress and utter sadness due to this. I want to know how to get my precious pictures and videos back.
I did it on my phone; I shared them to iCloud on my iPhone and then deleted them off of my camera roll, because I knew they would be stored on my iCloud. But, as you see, the next morning they were gone. :(((((((((((
-
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi 244 KBI didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me. -
I have now transfered my files of ripped CD's to my iTunes library three times Since upgrading to iTunes 11 and Windows 8. On each occassion, the conversion seems to occur fine, the files play, but when I close my computer and return the next day, iTunes says it cannot locate any of those files. Three times. Beginning to lose my temper. Advice? Suggestions? Could the fact that my original library is located on a network drive have anything to do with it? Thanks for your help, all.
Repair security permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7/8 shouldn't be too different.
Repeat for the media folder if it isn't a subfolder of the iTunes folder.
tt2 -
I just got a refurbished iPod 5th generation 32gb. This morning I went to turn it on and it didn't do anything and kept the black screen. I tryed to turn it on but it didn't do anything. The day before it had looked weird, as in I was downloading an app and it powered down, the when I tryed to turn it back on it got red and green lines on it. Should I send my ipod in to Apple so they can fix it or can I do this myself?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Or send it to Apple
Service Answer Center - iPod
Apple Retail Store - Genius Bar -
How can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?
how can i hightlight in excel 3 numbers in a column then skip one, and highlight the next?
Example: Column A
highlight 3
highlight 4
highlight 5
skip 6
highlight 7hold down the cmd (⌘) key while selecting them.
-
Can you set a passcode to activate at certain times of the day, say at 930pm, and turn off again the next morning?
No, sorry, you can't. The screen lock passcode is either on at all times or it's off.
Regards.
Maybe you are looking for
-
Good day All Since 3 weeks ago, I found something new with my iphone. First, I had to plug, unplug and plug the lightning cable into the phone to make it charging. Somedays after, I tryed to plug it a thousand time but nothing happens. When battery w
-
WCS building shows status as critical, but APs are green.
Hello, I'm new to the realm of wireless and I'm at a loss of how to resolve this. In WCS when I look at buildings on the map, it shows the status as critical with a red triangle, but when you click on the building all access points are green and oka
-
Can't load apps on my older I pad
I have an older I pad I bought used. I loaded credit into I tunes on a prepaid card. When I enter the apps store I try to download something free such as a calculator. It asks me to sign in. I then select the app and hit install . The desktop appears
-
Multiple AP541N dropping clients
I have 3 AP541Ns setup in a small environment. The wireless clients use laptops to attach, via RDP, to a Microsoft Terminal Server. They need the ability to walk, with laptop, from room to room, IE roaming wireless clients. The issue is the client
-
Worlflow and BSP ... Could anyone explain why we need BSP?
Hi, One of our customer wants to implement workflow using BSP. I dont have experience in BSP. So wanted to know why do we need BSP? If the customer has Portal do we still need BSP? Is there anything which can be achieved in BSP which cannot be achiev