I went to convert a clip and the screen is now green...both the project and original clip. help

I went to convert a clip and the screen is now green...both the project and original clip. help

MacBook Pro: Distorted video or no video issues .  The affected computers  were manufactured between approximately May 2007 and September 2008.

Similar Messages

  • Help! I paid for subscription, went to convert to word and its not responding!

    I verified the subscription,
    closed and reloaded pdf, and still its asking for a signup

    Hi cushwins,
    Are you still unable to log in to your subscription? Please clear the browser cache, and then log in directly to https://cloud.acrobat.com using your Adobe ID and password.
    Please let us know how it goes.
    Best,
    Sara

  • After renaming and moving to my desktop an iMovie project, i can not open it. I moved it back to iMovie but still it is not working. I noticed that there is not an Event Folder for the project. Can someone help me?

    I renamed an iMovie project, then I moved it out of iMovie to my desktop. It did not work from there. Finally I managed to move it back to iMovie, but still does not work. I can't edit it, it does not even appear as an option. I found out that the Event Folder for this Project is gone. Is this the problem? Is there a way I can get it back? Can somenone help me?? Obviously after so many mistakes you can tell I am new on this. Any help will be appreciated it!!!!!

    OK Let's take a step back.
    If you imported video clips from a camcorder there would be an Events folder in the Movies/iMovie Events/ folder.
    You have the option as you import from a camcorder to send your Event to an external drive instead. In this case, it would be in the iMovie Events folder at the top level of the external drive.
    If your project has no video clips, but only photos, there may be no events folder, only links to iPhoto.
    Similarly, if your camera imported your video clips to iPhoto, and you used the iPhoto event in iMovie, then your clips are in iPhoto, and there is no separate iMovie event.

  • Cannot convert between unicode and non-unicode string datatypes

      My source is having 3 fields :
    ItemCode nvarchar(50)
    DivisionCode nvarchar(50)
    Salesplan (float)
    My destination is : 
    ItemCode nvarchar(50)
    DivisionCode nvarchar(50)
    Salesplan (float)
    But still I am getting this error : 
    Column ItemCode cannot convert between unicode and non-unicode string datatypes.
    As I am new to SSIS , please show me step by step.
    Thanks In Advance.

      My source is having 3 fields :
    ItemCode nvarchar(50)
    DivisionCode nvarchar(50)
    Salesplan (float)
    My destination is : 
    ItemCode nvarchar(50)
    DivisionCode nvarchar(50)
    Salesplan (float)
    But still I am getting this error : 
    Column ItemCode cannot convert between unicode and non-unicode string datatypes.
    As I am new to SSIS , please show me step by step.
    Thanks In Advance.
    HI Subu ,
    there is some information gap , what is your source ? are there any transformation in between ?
    If its SQL server source and destination and the datatype is as you have mentioned I dont think you should be getting such errors ... to be sure check advance properties of your source and check metada of your source columns
    just check simple oledb source as
    SELECT TOP 1 ItemCode = cast('111' as nvarchar(50)),DivisionCode = cast('222' AS nvarchar(50)), Salesplan = cast(3.3 As float) FROM sys.sysobjects
    and destination as you mentioned ... it should work ...
    somewher in your package the source columns metadata is not right .. and you need to convert it or fix the source.
    Hope that helps
    -- Kunal
    Hope that helps ... Kunal

  • Pleasee! I need help I cant unlock my iphone I dont remember the password of my apple ID and all the recovery options are not helpful

    please I need help with my iphone 4S
    I reset but I didnt mind that to unlock it I need to put my old ID apple and I really dont remember the password just the ID and I cant use my iphone if i dont put the right code.
    All the options that apple gave me are not usefull i went to my apple store and they didnt help me with that what should i do?

    If you can't remember the password for your old ID you can reset the password as explained here: http://support.apple.com/kb/PH2617.  If you can't reset the password yourself, you can contact the Apple account security team for your country for assistance: Apple ID: Contacting Apple for help with Apple ID account security.  If your country isn't listed, you can contact iTunes store support by filling out this form: https://ssl.apple.com/emea/support/itunes/contact.html.
    Before doing any of that, make sure it's asking for your ID and not someone else's ID.  It will require the ID that was used to activate the phone originally.  If you aren't the original owner, only they can help.  You have to either get the ID and password from them, or have them erase the phone and remove it from their account as explained here: Find My iPhone Activation Lock: Removing a device from a previous owner’s account so you can reactivate it using your own ID.

  • History of the Project

    Hi all,
    I have completed the project, now i want to check history of the project whatever i have done in this project.
    can you guide me how to check the project flow and how to take print out.

    My question is
    I want to get History of the project, can you guys help me out which command i need to use to get the result.

  • Build error when trying to creat the project from inactive DC..

    Hello Experts,
    When I am trying to create a project from the inactive DC its giving and error message like build failed.When I switch to webdypro prespective I can see the project created.So please help me out in resolving the issue.
    Thanks,
    Harish.

    Hi Harish,
    Are you able to see the code and the components in the Webdynpro perspective. You can try the different options like Reload, Repair and Refresh.
    See in the log why the build is failing.
    Also check this thread:
    JDI:Import an existing DC fails BUILD; Used component not found: javaLib
    May be it helps.
    Regards.
    Rajat

  • In making a "highlights" movie, using clips from different imported iMovie events, can I delete the larger iMovie event file from the Events browser and still work w the smaller clips in the Projects browser w/o having the larger files still loaded?

    I have sucessfully imported 150 Sony digital 8mm movies (each one hour in length) into iMovie as 150 iMovie events. I have since successfully converted them from their original 13 Gb (.dv) file to an exported smaller 1.3 Gb (.4mv "large file") movie that I am happy with, using the iMovie projects browser. So now I have 150 " .4mv" movies on my internal HD as well as about half of my original raw data " .dv " movies on my internal hard drive.
    Due to their large size (over 2 Tb), I do not have all the larger raw data (.dv) files on my 2Tb internal drive, just about half of them. What I want to do now is to create a new project in the Projects browser for each of my kids, and reload, starting with Tape #1, each of these larger files and do a highlights movie for each of my kids, wherein I pick out smaller clips from each 1 hour .dv iMovie event and paste them into the appropriate kid's Highlights project in the Projects browser.
    Here's my question: If I load the first 5 large files back onto my internal HD, and paste in various shorter clips into each of my kids' Highlights project, and then if I delete those first 5 large files (they are backed up on 2 other 3Tb external HDs), can I keep doing this (reloading the next 5 large .dv files to work with), and ultimately take each of my kid's Highlights project and export as a .4mv movie EVEN THOUGH the earlier large .dv files are no longer on my internal HD, OR does my iMac need to have all these larger files loaded on my internal HD for me to eventually export each of my kid's Highlights project to a .4mv movie?
    I have a 2011 era 27" iMac desktop w 2Tb HD internal and 250 Gb flash drive, and Lion OSX and iMovie 11.

    Thanks. I tested it out and you were correct. I loaded 2 .dv movies from my external HD back onto my internal HD, and got them re-imported into iMovie, took a few short clips from each of the 2 iMovie events and pasted them into a new project in the Project Browser. Then I deleted these 2  "source clips" from my internal HD, closed iMovie and then re-opened it and found that iMovie would NOT export the smaller clips for a "highlights" .4mv movie without the "source clips" being available.
    I read your link on Quicktime. It talks about mostly trimming, which is what I did with each iMovie event before I took each one as a project to export as a smaller .4mv file. But if I use Quicktime (do I need QT Pro or basic), what advantage is it to me to use QT over iMovie (I must admit I am a novice at iMovie and have never used QT or QT Pro as a tool)? Will it then convert any edits I make to a .m4v movie or do I need iMovie to do that?
    Does QT allow trimming multiple segments out of a movie during one edit session, or can you only do 1 at a time? By that I mean that, for example, when I use Sonys Picture Motion Browser for my .mts movies, you can only set one Start and one End point for each edit/trim you do: it does not allow you to set multiple Start Stop points like iMovie allows in its Event or Project browser. You can only do one "trim" at a time, save it and then reopen to do another trim. not very useful.

  • Using Google GWT to create (Dashcode) widgets for iBook Author  I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pa

    I would like to embed interactive widgets in iBooks using iBookAuthor. The widgets in question started life in Java but GWT has allowed them to be converted to javascript and to run on web pages (for example, http://softoption.us/content/node/437 scroll to the bottom). In theory, iBookAuthor can bring in most html5, and much javascript. The technique is to wrap the html in a folder, with 2 extra files, a plist and a default png and then change the extension of the folder to ‘.wdgt’. This is the technique for making Dashboard widgets for the Mac, and Apple even have the Dashcode software to do it. So what you really do is to make a Dashboard widget, then iBookAuthor can import it.  So far, so good. And some  folk have been doing this, for example http://www.prweb.com/releases/2012/2/prweb9242432.htm http://www.panophoto.org/forums/viewtopic.php?f=64&t=10417&p=158330#p158423 However, if you start with GWT and create a single page with one button and a Hello World, compile it, and get the WAR file (I use Eclipse here)… the Safari browser and others will run it properly (even on an iPad). Then if you wrap it, a proper Dashboard widget is created, which runs properly on a Mac. Then if you go to iBookAuthor and put a custom widget in the Text, then drag it in. It is accepted by the text and shown as being there. However, if you use Preview to look at it on an iPad, it is gone (or was never there in the first place). Anyone any ideas on this? [And iBook Author seems to give no warnings.] The widget is at https://dl.dropbox.com/u/46713473/Test6.wdgt.zip I have bells and whistles that I’d like to get into an iBook!
    Thanks for any insights.
    Martin

    I do have a little to add, which might help someone. Indeed, opening a blank page and dragging the widget straight in seems good in difficult cases. But, actually, I was also able to insert successfully from the Toolbar especially to blank pages. So, it may have been something to do with the columns and stuff like that. Anyway back then the insertion would show in iBooks Author but not in the Preview on the iPad. I moved on to actual Google Web Toolkit output javascript. Basically I had three at hand to try: a Hello World with a button which went straight it, one of moderate complexity, (for example with a built in Lisp interpreter), which also went straight in, and finally a more complex one that initially was rejected by iBook Author. Author complained that there was an unsupported media file (of course, Author does not tell you which one it is, that would be too easy). [Remember, this was a proper working Dashboard widget which could be installed on a Mac]. Among other things I had read remarks about .gif files. When looking through the GWT war directory at the actual javascript etc files, I noticed there were two gifs there one called ‘clear.cache.gif ‘  and a second one called  ‘0F89659FF3F324AE4116F700257E32BD.cache.gif’. (Now, there is obfuscation so the numbers here may be different from case to case.) The clear.cache.gif did not seem to be anything special. But the other one is an animation. It is three little boxes that twinkle (rather like a waiting spinning cursor).  So, I opened that file and saved it to itself (that picks the top frame of the animation and saves only that, leaving you with an unanimated gif). The resulting widget drags and drops into iBooks Author (and seems to work properly at a quick glance). So, if you are having trouble with ‘unsupported media files’ converting animated gifs into unanimated gifs might help in some cases.

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • When converting multiple word and excel docs to a combined PDF random pages have blue background in the finalized PDF.

    I have a user using Acrobat 10. It was installed two weeks ago and initially had no problems. Today she reported that when she tries to convert multiple word and excel docs by selecting them, and right clicking on them to select convert/combine to PDF, random pages in the finished PDF have a blue background. I did some searching online and can find no information about this problem. Can anyone here shed some light on this issue and maybe point me in the direction of a solution? Any help is appreciated. Thanks!

    Hi Gilad,
    So, something I didn't consider was that this could be a setting in the office docs. The reason I didn't consider this was be cause we tested multiple docs and had similar results each time. I went back and looked into this possibility and found a setting in word that was causing this issue. Although the word doc showed no page color when opened in word, if I went to "Page Layout" -> "Page Color", a shade of blue was selected. By selecting "No Color", and then converting/combining the docs to PDF we got the desired result. Thanks again for your reply!

  • The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

    The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1).  I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
    Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them.  I imagine they are unchanged, but cannot be sure.
    Thoughts? Is it possible to uninstall an update re-install it later?
    Please advise.
    Thank you.
    Brian

    Also...
    Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
    There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
    You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
    Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
    I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

  • I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

    I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

    Hi Stephen, thanx...
    Yes, we are talking about FCP X...this is the thing:
    I worked on a project a few days ago and went to share - export movie.
    Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
    I tried to import the saved .mov file, but it opens the same....as one long clip...
    Pls help...thanx.

  • I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

    I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

    But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

  • I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

    I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

    Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

Maybe you are looking for