I will on the voice over then con't working on touch in my iphone 5

i will on the voice over then con't working on touch in my iphone 5

Your post makes no sense in English.  Please post in your native language.

Similar Messages

  • Using iMovie and the voice over sound has stopped working?

    Using iMovie and the voice over sound has stopped working?

    Are these the internal speakers?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • How do I get the voice-over in timeline to work.

    I moved the "R" and "microphone" buttons to the audio track, nothing happens when I click the buttons (the "R" is suppose to turn red). My USB microphone appears in audio hardware and is selected in System Prefs. Using Premier Pro 8.1 on new MacPro

    I don't believe there is such a thing on the Mac Pro (trash can), but I did finally get something to work with a not-very-instinctive combination of System Preferences (select USB mic), Audio MiDi Setup (select USB mic), and Premier Pro Preferences, Audio Hardware (DO NOT select the USB mic, but rather the System Default Input/Output). No other combination worked (I tried them all), and when I tried changing Audio MiDi settings while Premier Pro was running, I'd occasionally get the endless spinning wheel that required a re-start. Even with all this, one channel was peaked-out with noise (source?) which I couldn't eliminate with any settings (can do it in post, however). Overall a disappointing experience. I don't know why the Audio MiDi Setup has to be involved, or why this was so difficult with my set-up (I'm not ruling out user error).
    Any further advice is more than welcome,
    David

  • HT4528 While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me.  How do I get it back to normal?

    While I was trying out the voice over option on my phone I somehow put it in a mode to where the screen stays black and it will only talk to me.  How do I get it back to normal?

    "If VoiceOver is on and the screen is black, but you can still use the device by pressing volume up and volume down, you may have screen curtain on. Try triple-tapping using three fingers on the device display to turn off screen curtain. Or connect the device to iTunes"
    http://support.apple.com/kb/HT3577?viewlocale=en_US&locale=en_US

  • MAC Voice Over: Why does the screen view lag behind the voice over audio?

    MAC Mac OS X 10.6.8 (10K549)
    When using voice over on a MAC with DE 1.8 - most times when paging thru a pdf file/book the voice and the view are inconsistent.  When using VO -  moving to the next page with the right arrow key - the audio starts to read the next page (correct), but the display is one page behind (not correct).  For readers - especially those that have significant visual impairment  - this will not work for them.  Is this a defect - and if so - I would be very happy to re-test this feature if a new revision of DE 1.8 is provided.
    I am unsure this is the correct forum to raise issues such as this one.  I am in the process of evaluating Adobe DE 1.8 - my sister is blind and I am trying to move her to a MAC with VO.  I really appreciate Adobe's effort in supporting JAWS and MAC VO - thank you on behalf of all disabled folks out there.
    Below is a detailed list of steps to re-produce this audio/screen inconsistency issue.
    - Install DE 1.8 and add to the dock
    - Add a pdf file/book to DE 1.8.  For my issue, I am adding the "Voice Over Getting Started" guide. 
    - Turn on Voice Over - Cmd+F5
    - Using VO - Go to the dock and select DE and start it.  The "Last Read Book" typically is the focus for the VO cursor.  Then using VO next item (VO+right arrow) - move the VO cursor to "Library Content Table".  This is the list of books that are displayed in DE.
    - Using the up/down keyboard arrows - move up and down thru the books in the content list.  At this point - you should already see that the VO audio announcing the title of a book is not synchronized with the row in the table that is displayed.  The voice is announcing a book that you selected, but the display is showing the previous book. 
    - Once you hear (not see) the book you want to test with, hit <enter>.  DE will open the book and start to read using VO.  At this point the screen and audio for the first page in the book are the same. 
    - Once the book has been opened by DE - Using the right arrow key navigate to the next page in the pdf/book.  Normally the right arrow key is the short cut to allow a user to move forward or backwards thru a book, one page at a time. 
    - With DE and VO - what happens is that VO responds to the right arrow key and starts to read the next page.  But the screen is still showing the previous page.  Hence the screen and the VO audio are out of sync. 
    - For anyone that uses MAC VO - this will prevent them from using Adobe DE 1.8.
    If I am doing something incorrect - please let me know. If you need any assistance or further information regarding this issue - please email me. 
    Best Regards
    Mike R

    hi, Mike R:
         Thanks for your information. We have tested several Mac machines, iMac and MBP (use the same version as yours). But we can't reproduce the issue. Actually working with VoiceOver is a fundamental request for our application, we did test them before releasing the build.
         We suggest you test other applications, e.g. Finder, Preview and iTunes, to make sure if VoiceOver works fine with them. Or can you please check if your VoiceOver settings are correct?  

  • Is there a fix for skipping or repeating songs, or for the voice over to come on without pushing any buttons?

    Is there a fix for skipping or repeating songs, or for the voice over to come on without pushing any buttons?
    I only use this 5th generation Shuffle when I run. I don't have headphone issues because I use running headphones meant to handle sweat. However, my Shuffle will, halfway through a song, go back to the beginning, play a few seconds and jump back to the beginning again. Also, when this starts happening, the Voice-over comes on again and again with no buttons being pushed. I keep the Shuffled clipped to the waistband of my running shorts, so it probably does get a little sweatty, but not like it would if it were clipped to the collar of my shirt!
    Is this a problem I'm going to have to live with? I never had this issue with my old Shuffle, which was the first of the clip-on Sheffles.

    Hi punisherbv,
    Are you using the beta? it's not fully secure, so try using Firefox 3 instead. If you are already using Firefox 3, it seems like what Firefox is saying is correct- the site is not supplying identity information. So what you could do is go to that exact site, then click on the little golden lock at the very corner of the page. Then, enter the 'permissions' tab and allow everything. Exit, and then try bookmarking the page!

  • Can I designate where the voice over tool's files go?

    Is there a way to tell the voice over tool where the files should be placed? Just curious.
    Best,
    Tom

    In system settings, tell it to capture audio files separately from video files, and then select a scratch disk for the audio files. I think this will work, but not sure. I've never had to do it.

  • Recording your own commands for the Voice Over Utility

    To Record your own commands for the Voice Over Utility?
    Is this possible?
    How?
    thanks

    If you simply want to change the command used, or add an extra command that does the same thing, you just need to know that the file names are used as the name of the commands for Speakable Items.
    If you open system preferences, the speech pane, select "Speech Recognition" at the top and then "Commands" on the next line there's a button there - it's labeled "Open Speakable Items Folder". Click on that and it shows you a folder containing all the global commands. If you want to change one of these, you can edit the file name. It's probably safer if you duplicate the file ("duplicate" from the context menu) and then change the name of the copy, so the original is still there in case of mishaps! I'm not sure if a comma in the file name would work but I suspect it wouldn't - none of the commands there have commas in them.
    If you want to change a command in a specific application then open the "Application Speakable Items" folder and explore from there.
    Another thing which might help is to go back to System Preferences and click on the "Global Speakable Items" in the command set list and then click the "Configure" button. There's an option there which will make more variations on the commands work.
    The most complicated way is to write your own new speakable items. This gives you the most flexibility but also you need to learn some AppleScript to enable you to do it. If you want to learn AppleScript, check out the AppleScript resources - it does lots more than just speakable commands and the general resources should help you most.
    Best of luck!
    Ricky

  • Recording the Voice over

    Hello,
    I came across the voice over feature on my iPhone and was wondering if there was any way I could record it saying something with my voice memo feature?

    If you simply want to change the command used, or add an extra command that does the same thing, you just need to know that the file names are used as the name of the commands for Speakable Items.
    If you open system preferences, the speech pane, select "Speech Recognition" at the top and then "Commands" on the next line there's a button there - it's labeled "Open Speakable Items Folder". Click on that and it shows you a folder containing all the global commands. If you want to change one of these, you can edit the file name. It's probably safer if you duplicate the file ("duplicate" from the context menu) and then change the name of the copy, so the original is still there in case of mishaps! I'm not sure if a comma in the file name would work but I suspect it wouldn't - none of the commands there have commas in them.
    If you want to change a command in a specific application then open the "Application Speakable Items" folder and explore from there.
    Another thing which might help is to go back to System Preferences and click on the "Global Speakable Items" in the command set list and then click the "Configure" button. There's an option there which will make more variations on the commands work.
    The most complicated way is to write your own new speakable items. This gives you the most flexibility but also you need to learn some AppleScript to enable you to do it. If you want to learn AppleScript, check out the AppleScript resources - it does lots more than just speakable commands and the general resources should help you most.
    Best of luck!
    Ricky

  • What is the use of enabling "speak notifications" on under the voice over in ios5 ? can it read out my notifications?? plz help...

    i have recently updated my iphone 4 to ios 5. in the accessibility options i found the voice over and inside that i found the "speak notifications" . i enabled it on.. but doesnt know whats that for? can ny one help me? will it read out my notifications aloud? but its not working plz help..

    create your own entreprise!indeed
    I had a "dream" job for a while. a guy - who writes books on software process, and is a member of the agile alliance - had an idea for a product, sat on it for 15 years then left his job and started a company. he assembled his team personally, and 8 of us sat in a room and worked to make his idea a reality. he was the management, and he was also the most talented programmer of us all. the team ran beautifully, we rarely had a deadline to work to, save the odd launch here and there, and there was absolutely zero office politics. all we did was write code, toss ideas about, play with the development process and sometimes go karting, or to the pub, or for a curry or something. I actually looked forward to going to work every day, because of this free reign we had, and we all turned out orders of magnitude more code than anywhere else I've ever worked. but the investors got nervous and pulled funding, leaving the project somewhat crippled. nice while it lasted, though, and I learnt more in my short time there than I did at university, and across 5 years experience in other companies
    so the answer is: come up with an idea, be expert enough to assemble and manage the perfect team and convince some rich people to lend you lots of money. simple. but be prepared. this guy was routinely doing 18 hour days, 6 days a week (he was a Christian, otherwise he'd undoubtedly be doing 8 days a week). he'd be out and about most of the day doing sales and marketing, flying around the world for meetings and stuff, then come into the office and code for 8-9 hours a night

  • I don't hear the music and video sound anymore! (only the voice over) Can someone help me?

    I am making a video, and now I only hear the voice over, when I play the video in Premiere Elements 12..
    Can someone help me?

    marcolk
    What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update?
    To your immediate problem....there is a known issue with Premiere Elements wherein the sound is lost on numbered audio tracks and soundtrack when narration with the program's Narration Tool is added to the project. I suspect that you have fallen into this issue reported by several, but not all.
    A remedy has been given by the ID Llamadude 99 and this remedy as well as some modifications of it have worked for most to overcome the problem.
    Please read the following for the details, and then let us know the outcome.
    http://www.atr935.blogspot.com/2014/06/pe12-audio-losses-after-narration.html
    We will be watching for your follow up.
    Thank you.
    ATR

  • Lost the voice over bt function after removing battery

    I have a new Treo 800w and a new Plantronics 925 bt headset. I installed the voice over bt software, established a connection, and was able to use it to make voice calls (call john smith). I removed the battery to record serial numbers etc. When the Treo came back on, I reinstalled the voice software as advised. Now I can answer calls and talk using the headset, but I cannot get the voice commands to work again. I have not installed any third party software. Any suggestions?
    Post relates to: Treo 800w (Sprint)
    Message Edited by jadowd on 04-04-2009 06:28 AM
    This question was solved.
    View Solution.

    Not sure why you re-installed the software again after a soft reset. Taking out the battery and re-inserting the battery is a soft reset. See the instructions in the article below for the hard reset procedure.
    The program may have gotten corrupted when you installed over the top of the existing installiation.
    Here is the statement from the download page regarding re-installing the patch.Effect of resets on this softwareIf you install the Voice Dialing over Bluetooth Download and perform a hard reset, you will need to re-install the Voice Dialing over Bluetooth Download.
    If you install the Voice Dialing over Bluetooth Download and perform a soft reset, no action is necessary. The Voice Dialing over Bluetooth Download remains installed after a Soft Reset.
    You may need to uninstall the program and re-install. The fastest way is to Hard reset the Treo and then re-install. the hard reset will erase all data on the Treo, so make sure you sync before hard resetting.
    Here is the hard reset procedure for a Windows mobile Treo.
    Click on the following link to the kb.palm.com webpage for the article regarding Resetting your Windows Mobile Treo smartphone.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=41108
    Another option is to delete the application and then re-install without doing a hard reset.
    Here is link to the article regarding deleting applications from your Windows Treo.
    http://kb.palm.com/SRVS/NUA/launchKB.asp?c=41572 
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=treo&mn=800w&cn=sprint
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

    i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it  please advise

    You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • Can I setup my new macbook air without the voice over?

    I was given a new macbook air as a gift and if it cannot be setup or used without the voice over feature I will have to return it. I cannot imagine why anyone would think this is a good idea. I just want to use it like a laptop.... is that too much to ask?

    I'm having the same exact issue. Got it as a gift, and can't get past the set up. I would try the fix dominic suggested, IF I could just get past the "What country do you live in" question. It won't let me select a country, and so far, can't access anything else on this thing until I get past that part... which I can't, after trying for 3 hours now. 
    The steps given in the 'voiceover' tutorial don't seem to do anything, but cause system error beeps.
    I can't select a country via the 'mouse pad' either.

  • How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

    how to unlock ipad with voice over and password?  i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

Maybe you are looking for