I Will Recommend it, FAQ For all forums (To Moderator)

Hi ,
When I came across many posts (in any discussion forum) few of them are repititive in nature,
so if the moderartor of the group (applicable for all groups) can consolidate all those FAQ with solutions
as a seperate link for all groups it will be very helpful, especially for a beginner.
with thanks & regards
Ranjeesh K Ramakrishnan

Ranjeesh,
As a beginner, I recommend:
http://otn.oracle.com/products/warehouse/selfserv_edu/self_service_education.html
However, point taken.
Thanks,
Mark.

Similar Messages

FAQ with Answers for all forums (To Moderators)

Hi,
Looking at many of the forum messages I felt that few of them are repititive in nature. If the moderator can send the Important messages(Q & A) of a particular forum to somebody in oracle and if they can maintain that as FAQ for each forum on OTN database and a link for that to the OTN user it will be a great help. This will help the memebrs for quick learning if they are new to that technology.
Cheers
Ran

Ranjeesh,
As a beginner, I recommend:
http://otn.oracle.com/products/warehouse/selfserv_edu/self_service_education.html
However, point taken.
Thanks,
Mark.

Is it not recommended to use FOR ALL ENTRIES in version 4.5B

Hi,
Is it not recommended to used For all entries in version 4.5B as Size limit for SQL is 32KB hence we should not be using FOR ALL ENTRIES, instead of this we should be using select inside the loop?
Can anyone please let me know if this is correct and if you can provide me the SAP documentation on the specific statement.
Regards
Ria

Hi Ria,
From what I understand, you cannot use JOINS with FOR ALL ENTRIES in 4.5b & lower versions. In general the SELECT..FOR ALL ENTRIES statement has been in use from 3.1i versions. For more information, PL take a look at OSS Note #652634.
Regards,
Suresh Datti

Will face time work for all users on my Macbook

I want to purchase the FaceTime App for my MBP, but i want to be sure that it will work for all users on my MBP. My wife and I (much to my dislike) share my MBP and When i go out of town, I want to be able to use the FaceTime app to chat with her and my son. We use seperate App store accounts for our Iphones (3g and 4s) will this matter?
Thank you

You posted your MBP question to the "Intel iMac Forum." I would recommend reposting in either the Macbook Pro Forum or the Lion OS Forum.
Hope this helps

My itunes will not search computer for all songs stored.

I rencently reinstalled itunes to try to get it to reconize a external burner. It will now not automatically search the computer for all the songs that were orignally there.

Yes.
You should have copied everything from the old computer to the new one.
Type "move itunes library" into the google search bar

Must install for all forum members

Hi everyone! Mods please move if I'm in the wrong forum?
Lenovo have launched a new laptop T Series I think that has a 'find my laptop' facility. But for the rest of you with older machines, please do not gut your lives as mine has been done unto? Do no procrastinate! Follow my suggestion. Do it now, while you can.
My new Z was stolen on Comrades Marathon day in S.Africa. My business in jeopardy as nothing had yet been backed up. This is why I refer to it as 'gutting ones life'. On the Monday after I found out that 3 laptops had been taken in that one day at the same shopping centre. Two of them Lenovos (they get sold at a taxi rank for ZAR50 or USD12!, this is for a ZAR 9000 machine!).
There are 2 very helpfull software packages that you can get:1) is a look for me type thing that traces the computer whenever it logs onto the net. 2) The other uploads photos at 15 min intervals of the person using the web on your computer. Choose one, choose both but install them. Google stolen Lenovo, you will see the agony of people wordwide. It is worth it to do.
My aim is to buy this new T series or whichever it is, if I can survive & resurect my ailing company because of the lost data. Obtaining a 'look for me' is - to me anyway, the most important & first consideration I will choose my next machine by.
Regards & 'may the Lenovo always be with you'.

Hi Everyone,
Thanks for the answers. Sounds like a very creative group.
Our brilliant in-house WebWorks administrator set things up to convert FrameMaker+SGML to Oracle Help. This works really well because:
1. we type the help TopicID string into each FrameMaker+SGML Chapter-level and Section-level Id attribute. Each Chapter-level and Section-level group of SGML elements is converted to a separate help topic html file.
2. each TopicID and html file name is added to the MAP file.
3. each Id attribute value and the associated Title string convert to the TOC.xml entries
4. the Id attribute value becomes the target (Linkend) of any FrameMaker+SGML, cross-reference....making it possible to convert FrameMaker cross-references to Oracle Help links
5. cross-references to FrameMaker+SGML Glossary Term elements are converted to Oracle Help popups (and we assign the help TopicID for popups using the Glossary Term element's Id attribute)
6. ALink group membership is established by putting the ALink group name into a hidden marker within the chapter/section where WWP can find it. We use an additional marker to designate the location where a text-string should become a link to display the list of ALink members in Oracle Help.
We have been able to automate all aspects of the conversion including the helpset, index, full-text-search, and link files.
Pete, would you be willing to share information about your in-house FrameMaker+XML and XHTML Converter tool strategy? Are you taking a similar approach?
Best regards,
Wendy

My Slow Mac Mini - will someone once and for all give me an answer!!

I got a 1.25 ghz Mac Mini with 512 RAM running 10.4.4 . This thing has been so slow since I pulled it out of the box. I always get the colorwheel when doing just about anything. No, I don't have a bunch of apps open, just Safari and Mail. I tried closing Dashboard, but that did not help. There is also this lag, when I mouse over my dock, it does not immediatly respond. This is no fun. Does someone have an educated answer for this problem?

Robert,
If you restart your mini, does it act this slow from the start? Or is it when you use it for a period of time?
Also, open Finder, and click on the Applications section. Look for a program called Activity Monitor (it may be in a folder called Utilities). When that opens, there is a section called Memory (may be Memory Usage). Click on this and sort by Memory on the list. This will show programs that are using significant amounts of memory. My hunch is that a program is eating up all available memory and slowing your mini down. The most likely culprit is Safari. To quit Safari, you have to actual select from the menu, the Quit option. Just clicking on the X will not close Safari.
Post back with the answers to my first two questions. Also, post back with what you find in the Activity Monitor program. There are lots of people here that are more knowledgeable than me, so hang in there, we'll find the answer.

My music on the iPod touch 4g isn't sorted out by little sections anymore. For example songs with the letter A and then there will be a marker for all A lettered songs, but my ipod does not do that to all of my music. How can i fix this?

My music on itunes doesn't have the markers anymore, how can i fix this?
So my songs should be listed like this:
A
Advice
B
Bang
C
Chinter's will
K
KannaZuki No Miko
L
Lights

The reason the alphabetical sections aren't showing is because you don't have enough songs. In order for them to show, you have to have a certain number of songs. ( I think it's 40 ).

I use Norton Security, a pop window appears to enter my password so that all log-in names & password will be automatically entered for all applications, will Firefox 4 support this feature?

In Norton Security, there is a feature called "Web Protection Log In" where a pop window appears then I enter a password only once as soon as I log in. This feature will automatically fill in my log-in name and password to all applications I use just as ATT.net. Will I be able to have this feature in Firefox 4 ?

You're welcome.
Please click the '''Helpful''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved'''.

Set the default size for all archive mailboxes including the ones it will be created in the future

Hi there.
We are in the phase where we Will enable Online Archive for all the users.
We see that the default Archiving Quota is set up for 50 GB. We have found this powershell command on MsTechnet forum
Get-Mailbox -resultsize unlimited | where {$_.ArchiveDatabase -ne $null} | set-mailbox -ArchiveQuota 7GB -ArchiveWarningQuota 6GB
which I guess it will set up the ArchiveQuota to 7GB to all the users, true?
The question is if this command will work only for those users who currently have archiving enabled or it Will also work for those users which we are planing to enable archiving in the future?
The idea is that everyone would not have 50GB by default and this should be a default value also for those who currently do not have archiving enabled.
with best regards,
bostjanc

Hi there.
I don't quite get it.
I have created "for example" a database called: STH ARCHIVE.
Then if I take look on properties of this database this is how it's shown:
And now here comes the "tricky part" which is a little bit odd to me.
I have enabled archive on my mailbox and selected this STH ARCHIVE DB to hold this archive mailbox.
Then I have manually ran ManagedFolderAssistant for my account: Start-ManagedFolderAssistant -Identity "my-email-address"
And after I have greped the size of my mailbox:
Get-Mailbox | Get-MailboxStatistics -Archive | Sort totalitemsize -desc | ft displayname,totalitemsize, itemcount >C:\report-archive-database-mailboxes.txt
And get the result:
Personal Archive - MYUSERNAME
TotalItemSize: 4.071 GB (4,371,586,689 bytes)
ItemCount: 55227
So now I don't understand how I was able to go thru that sizes which are in the upper print screen of archive DB properties?
bostjanc

Frame Controls-Best for All ?

Hi there,
Will you select "BEST" for all to get a better quality for your Final Master Clip?
BTW, it takes very long for the conversion...will you recommend it?
Thanks

Better is ok for all around uses...
BEST is if your deinterlacing, and you still get deinterlacing artifacts when using BETTER setting. It is best to take a small section (30 seconds) of the video were interlacing shows on the computer screen and do a test between the BETTER and BEST setting.
The BEST setting can add a considerable amount of processing time. A 20 minute video can take the weekend to process depending on the computer you use.
The FAST setting is (IMO) useless and MPEG-Streamclip is the better tool if you want fast processing.
http://www.squared5.com/
And it's free!
When using the frame control it is always a good idea to do a small test before committing to what setting your going to use.
From page 258 of the User Manual:
Fast (Line averaging): This option averages adjacent lines in a frame.
Better (Motion adaptive): This option offers good-quality deinterlacing for areas of
the image that are in motion.
Best (Motion compensated): This option offers higher-quality deinterlacing for areas
of the image that are in motion.
Warning: Using all Best settings may result in unexpectedly long processing times. If
you are reducing the frame size in addition to deinterlacing the frame, Fast or Better will
likely provide sufficiently high quality, depending on the amount of downward resizing.

Custom CSS-Applying selected background for all the cols in the report

Hi,
I am trying to set a particular background for all the columns in the report(not for all the projects,so that I can avoid option of manually setting background color for complete report.For this I thought custom CSS is best option.So edited custom.css(C:\OBI11g_Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\b_mozilla_4) file with below code and went to the Answers-> Criteria->Choose Column->style-> check "Use Custom CSS Class"->MyCell
Code used in custom.css
.MyCell { background-color: #00ff00; font-style:italic; font-weight: bold;}
Somehow I dont see the background color applied to any of the columns in report.Can anyone had successful attempt of this Custom CSS.Thanks in Advance.

I am trying both the solutions.
User 979493,
I started manually writing the code instead of pasting and almost worked.In the mentioned below paths I dont have custom.css file,so I created one and manually entered below code.But does it work for only that particular column and not for all the columns.Is it supposed to work for all the columns or just that column.
For example: I have 2 cols in the report,I used "Use Custom CSS Class" -> MyCell for the first column and when I ran results it shows background color for only col1 and not for col2.I thought this feature will apply background color for all the columns in the report.Please correct me if I am wrong.
custom.css file content:
.MyCell{background-color: #00ff00;font-style:italic;font-weight:bold;}

Funds Management for all transaction

Hi
I have activated funds management. I want this only for checking budget for non-assigned PO.
But it will ask comittment items for all business transactions like FI / MM / SD,etc
What settings needs to be done for the same so that other transactions are affected. Please help

Hi,
Bear in mind that the minimum account assignment that must be provided in case of FM, is funds center and commitment item, this is required for postings, budget, avc and so on.
Funds center can be a combination of cost centers that you should have filled in your PO.
To be able to derive automatically funds center from the cost center, use FMDERIVE transaction creating a derivation rule that connects cost centers to the funds centers.
The FM derivation tool can only be used for deriving Funds Management account assignments. Additional information is
available in note 881202.
I suggest you to read also the documentation available in the following menu:
SPRO -> Public Sector Management -> Funds Management Government -> Prepare Funds Management Installation
It is only a text document but with links and with all the necessary instructions to start FM in your company.
I hope that this helps you.
Best Regards,
Vanessa.

How will get stoppage hours for PM02 orders

Hello Guru,
I want to find out stoppage hours for PM02 orders according to PM Act Type (eg. PM, predictive maint., TPM, etc). Background is that, our PM02 process schedules maint order as per maint plan & it wont triggers Notification in background so users are unable to enter work details ie. work start date/time & End date/time.
In this situation, how will get stoppage hours for PM02 orders?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Regards,
Amol
Edited by: Rob Burbank on Jan 17, 2011 4:25 PM

Hi PMAmol,
As Babu suggest, You can use Act Start and Act End date and time from Order Header for your requirement , Now how to use those ?
Once you do Order Confirmation via IW41 , for first operation mention date and time in Work Starts on date and time when you start your work,
Then this date and time will reflect in Act Start in Order Header, after that when you finish your work , then in IW41 along with final Confirmtn tick mention the date and time in Work Start on and Ends on field , when CNF status set on order you can check in order header , this date and time will reflect in Actual End date and time.
For report you can use Iw39.
Riyaj

How do I set Premiere preferences for all users - University lab machine?

I am setting up an editing suite for our University which has a "per machine" Creative Cloud licence. It is a PC installation. This machine will be used by a class of students who will log in with their own credentials. I need to set the preferences for Premiere (video output, workspace layout, default drives etc) so that it will be the same for all users logging in since we want a consistent setup for teaching purposes and dont want to have to help each student set up so that it shows correctly on the monitors. Is there a way of saving this setting as the default for every user?
The most important one is the preferences - Playback in order to set up the second monitor.
Message was edited by: Bruce Cooke

Hopefully you did manage to do it.
Reading this should be enough Adobe Premiere Pro Help | Preferences

I Will Recommend it, FAQ For all forums (To Moderator)

Similar Messages

Maybe you are looking for