I will starting afresh website in my iWeb, it shows only the head or the command line and the command new website is inactive - what do I need to start over
Help........
I will starting afresh website in my iWeb, when I start the program it only shows the head or the command line and the command new website is inactive - what do I need to start over - what have I done wrong
Don't quite understand what you mean, but it says at the bottom that you are still using iWeb 08 so depending on what OSX you are running, you might consider upgrading to iWeb 09. This works with Lion, Mountain Lion and Mavericks.
Apple no longer sells iWeb so if you decide to upgrade, then you'll need to purchase iWeb by going to Amazon and buying the iLife 09 or 11 boxed sets, both of which contain iWeb 09.
Install this on your Mac and it might solve your problems, or just ditch iWeb and start again with one of the newer programmes out there that are still being supported and updated, such as RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4, WebAcapella 4 and EverWeb (http://www.everwebapp.com).
Similar Messages
-
How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.
Ernst ~ Welcome to the Support Communities. See this post:
Editing my iWeb page from another computer -
Kichat: FAQ 1 - What do I need to start in iChat ? (Replacement)
Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).
<blockquote style="width: 80%; margin: auto; padding: 5px; border: 1px solid #000; background: #efefef;">10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
2:59 PM Friday; March 30, 2007Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).<br>
10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
9:10 PM Wednesday; April 4, 2007 -
I also have a MacPro3,1 (2009) I believe and just started experiencing similar issues as described here.
I have scheduled sleep and start cycles and often I will leave my office and return to find the fan running at max speed and the computer is unresponsive or I find the computer booted in to disk utility mode.
I also often loose ethernet connectivity and have to try renewing DHCP lease several times before it will finally work.
Has anyone found solutions for this. I have looked at the console errors right before shutdown and don't really see anything fishy. Here are the last couple of lines before it looks like it shutdown.
12/4/14 10:08:37.447 PM xpcproxy[5066]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
12/4/14 10:08:58.145 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.193 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.235 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.269 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.301 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:08:58.662 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:09:57.998 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:09:58.142 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
12/4/14 10:10:30.000 PM kernel[0]: PM notification timeout (pid 1514, Messages)
12/4/14 10:10:31.129 PM mDNSResponder[39]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 0 failed CFDateRef start 0000000000000000 CFDataRef lease 0000000000000000 CFDataGetLength(lease) 0
Any help would be greatly appreciated.
<Re-Titled By Host>Mac Pro early 2009 is Mac Pro4,1, anyway, I think you need to boot into recovery mode, launch Disk Utility, then select startup volume and run repair disk.
Xcode is the latest one, by the way? -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day! -
After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
Can I fix that just doing the upgrade for the Yosemite?Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice -
Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?, Hello, I have update may Win8 to 8.1 and the Itunes doesnt start at all. any idea?
I did this several times.... not help. If I run win8.1 safe mode the Itunes stars and mentioned that video and sound driver not fit for them. After this I downgrade the driver to Win7---> not helped after this I update driver to latest--> not helped....
This is the situation right now. -
I put a Favicon on my website, which can be seen in the adress line and the tab header. However, when I add this site to the bookmarks, it doesn't show it's favicon. I have tried deleting and creating a bookmark and also refreshing the webpage or clicking on the bookmark. I don't know what else to do. I use Firefox 4.0.1
I'm getting favicons for most of my bookmarks, so there might be some issue with the coding or the image format.
Do you use a tag like this in your page?
<link rel="shortcut icon" href="/path/to/favicon.ico"/> -
For the last 10 days I have been unable to open the Mail account on my eMac (MacOS10.4.11). When I click on the icon in the Dock the only option I get is "Force quit" and the main Mail bar will not open any choice. Any ideas?
You can setup Mail for iCloud on the eMac.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password -
I have two Ipad's and tried to create two ITune Libraries on my computer. Now cannot find the original library on my computer and the Ipad will not syc?
You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.
-
the charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?
Could be bad ram or logic board. Take it to an Apple store or AASP.
-
my Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the in a straight line, and randomly right clicking on things.
If I close the computer and open it back up, it sometimes stops for a little while, then will spontaneously start again. Any help would be truly appreciated. Thanks!See this knowledge base article. Also, you might want to update to 10.6.8 (don't know that that will fix your problem, but it's the latest version of Snow Leopard).
Clinton -
We got a new laptop and redownload iTunes, will my iPad connect to this new laptop as well? We recycled our old laptop.
Sync with new computer
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
That should do it. -
What do I need to start a server?
Hello,
I am an interested college student and I would like to make a test application server on my PC to basically just learn the JSP technology and possibly host a personal site on it. I have had a year of Java in high school, however we only really worked on desktop apps. I want to know what specific applications I need that I can download for free from the Sun site to accomplish this task. I have downloaded Java System Application Server Platform Edition 8 and definitely will use Studio Creator. I have used NetBeans in the past (I realize Netbeans is more for desktop apps and the Studio Creator is for web stuff), but it confused me with the amount of features which gives me a strong feeling that I only dabbled in watered down (newbified) techniques in my class (for ex: the use of BreezySwing). I know I could definitely read Documentation for years straight without any problem, but I want to just jump in and do! Any tips on where I can learn more condensed, concept-based info instead of detailed, confusing, long listing?
Thanks in advance,
ShaunRather than going with the sun application server, I would recommend you get a hold of Jakarta Tomcat.
It also is free, and is a good place to start with web programming.
With Tomcat you can jump straight into servlet/JSP programming, without worrying about EJB, JMS, javamail... and all the other extra stuff that is part of the J2EE spec.
You can find Tomcat here: http://tomcat.apache.org
Setting it up: http://www.coreservlets.com/Apache-Tomcat-Tutorial/
The Tomcat docs are fairly good. I recommend you read this tutorial on setting up web applications: http://tomcat.apache.org/tomcat-5.5-doc/appdev/index.html -
So I have been having this very annoying problem with the loading of certain internet sites e.g - Ebay, google maps, google in general & you tube.
My internet connection is fine and i have spoken with my service provider TPG and Apple about this annoying issue.
I can be generally browsing on google for instance and then suddenly the page freezes? No matter how many times i click the Refresh tab it still manages to do the same thing. Now the most confusing bit is, instead of clicking the refresh button I then venture off to Yahoo for instance and that website will work just fine??
Ugh, another (now) consistant issue is that none of my pictures are loading when im on Ebay? yet i can browse every catagory just fine....?
Please, if there is anyone out there HELP ME.... I'm a Mechanical Technician (Fitter by Trade) I do not class myself as a Computer Technician.... Far from it!!Thanks for the advise....
You're correct about the steps you mentioned earlier. Tho Unfortunetely I've tried these things. Infact I was on the phone with applecare last night for about an hr & a half, yet even they seem stunned as to what is causing this?
We reset the safari in a different way as you mentioned earlier (I would not have been able to do this without some Technical assistance)
Open Finder > click on the GO tab > Hold down the OPT key & a tab will appear that reads [Libary]
Click on Libary > Now look for a folder that reads [Safari]
Drag this folder to the desktop
Now open the folder that reads [Preferances]
Look for files: com.apple.safari.plist & com.apple.Safari.RSS.plist
Now quit any programs operating & restart the computer.
Vwallaa Safari is officailly reset, it will even take you on a tour when you open it for the first time.
Now the catch is.... this didnt work "For me" So My next step was to make a dummy account on my Mac (making sure that it had administrator rights) I then tried it on the dummy account. Luck would have it as it still managed to do the same thing.
Apple came to the conclusion that restoring Lion might be a possible solution. So we done just that, wasnt till this morning when i turned on this annoying Mac i realised that it is still doing the same thing.
Apple care is going to call me this afternoon so hopefully "fingers crossed" this issue can be fixed.
Maybe you are looking for
-
Hi all, i have a table which has certain data. i also have a tree ui in my wd. the first record in the table is the root and rest are child. how do i populate the tree. plz help me with code snipet if possible. reply soon Thanks & Regards, Ritwik.
-
I'm new to Lightroom. Struggling with downloading from iPhoto to Lightroom. Pls help??
I have installed Lightroom@ on my mac. Trying to import photos which are saved in iPhoto. Have found your link which says I need to create a master copy and copy to my desktop, which I'm in the process of doing, but: (1) it says it will take 11 hou
-
Hello to everyone, i am trying to put a progressbar in my application, the progress bar i use is the one that appears in the Swing Component part of JBuilder, i have the next code: JProgressBar progBar=new JProgressBar(); progBar.setMinimun(10); when
-
Custom icon reverts to standard Pages document icon...
I'm having trouble with permanently assigning custom icons to Pages '08 documents. Say I've got a document, I'll create an icon, set the icon via the info panel, everything is fine. The next time I click on the document with the new icon, the documen
-
I have to develop a website application with Oracle Web-DB. I can't understand how to make a link in a report that can accept itself as parameter. I mean, I want the user to click on the link, the text of the link must be used for a sql query with ot