I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile
I will travel to France and let me know if I should buy any adapter to charge my iphone?, because the plugs are different than here in chile
Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur
Similar Messages
-
Creative, if you can't help me or let me know if I should buy elsewhe
OK after having my last thread Hijacked by someone else and my problem going unheard, I need to know if I should rip out your soundcard and buy somewhere else or if there is hope that maybe this can be fixed.
http://forums.creative.com/creativel...essage.id=8392 That's my old thread so don't reply there, reply here.
no 5. surround. Only L,R,and sub working, can't find setting to adjust it. I read the knowledge base and it said this:
How to enable CMSS in Creative MediaSource for Sound Blaster Audigy 2 NX
Click Start, (All) Programs, Creative, Creative MediaSource, and click on the Creative MediaSource Player or the Creative MediaSource Organizer.
Click on the EAX button to enable EAX. The button should now be highlighted in green.
Next, click on the little buttons next to the EAX button, which will bring up the Creative EAX Console.
In the EAX Console, check the CMSS 3D tab, then check the box next to Enable CMSS 3D.
Select ether CMSS or Stereo Surround and close the EAX Console. </LI>
But I can't do number . because there is no creative folder? I had this professionally installed so I need help please.Hi Shawn,
It sounds like the person who installed the hardware didn't install the software properly for you. You should reinstall this to get full functionality and control yourself.
The process is easy:
) With the computer on, close all programs that are running and put the Creative CD-ROM into your computer's CD or DVD dri've. There are probably several disks; the one that you want should say 'Intallation and Applications CD' on the label.
2) The Setup program should start automatically in a few moments, but if nothing happens, click your Start menu and choose Run..., then click the Browse button. From the 'Look In' drop-down menu, choose your CD/DVD dri've. In the list of files that appears, choose the one called Setup or Setup.exe.
3) The Setup program will let you choose what to install. Choose to install everything. There might be two separate Setup processes that start after this: one for the soundcard's drivers, and one for the Creative MediaSource software. Within each process, when you are given the choice of Full, Custom, or Basic, select Full in each case. Follow the instructions in the programs and they will guide you through the setup process.
IMPORTANT: you will likely be given the option to use digital output only to your speakers. Only select this if you have digital speakers, attached to the sondcard through only one digital cable. If your speakers are attached using several cables, you should use analog output.
4) Once all of the Setup programs are completed, they will probably have you restart your computer.
All of the above should have been done when the card was first installed, but it seems that whoever you paid to do the installation didn't bother with the software install.
After this is all done, you should be able to use all of your speakers. If you are still having trouble, you will be able to follow the instructions that you were given before on how to enable CMSS.
Good luck!
Neeraj Mathur -
I am not sure of the voltage of my iphone. I want to know if I need a special transformer to charge my phone in Norway.
Thanks for your help.I have just returned from Norway 1 month ago and had no trouble charging my phone both through computer and power pack.. Enjoy .. Its a beautiful country!
-
Thanks for your help
It's not a matter of changing the country. The issue is your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
You can change the country by clicking the round flag icon bottom right side of the App Store window. -
iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows VistaI doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction. -
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
I cannot get my messages/text messages to work om my Hi. I am sending this thru my iPad. Respond and let me know you got it. Fun fun fun. . I did go and try to another Apple ID different from my iPhone but it still will not work. Can anyone help me?
chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do. -
I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.
All you need is a physical plug adapter, not a voltage converter. All Apple chargers work on any voltage from 110 - 240 worldwide.
-
I am traveling to Australia and need to know what I need, converter, adapter, etc. to safely charge?
Apple power supplies (bricks) work on all voltages and frequencies in the world, so it doesn't matter where you come from or where you go to ......
You will need an adaptor to make the wall plug provided fit in the Australian sockets, buy that at the airport when you get there.
That's it -
Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks
José, if you buy and download Logic Pro in App Store now, the best option would be to buy an upgrade to Logic Studio. I don't think Jam Packs are available any more in Apple Store, besides it will be more expensive buying them one by one than upgrading to Studio.
Español: José, si compras y bajas Logic Pro de App Store ahora, despues la mejor opción será comprar el upgrade a Logic Studio. No creo que estos dias fuera posible comprar Jam Packs de Apple Store, y además comprarlos uno por uno seria más caro que el upgrade a Studio. -
Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my queryYou need to activate Photoshop.
Mylenium -
My iPad no longer puts out sound it was in my backpack will it was raining and don't know if that's what caused it pls help
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/ -
why did not i get installation CD with my mac book retina display 13", when i bought. and let me know what are the tings i get with my mac book pro with free of cost?
MacBook Pro
http://store.apple.com/us/buy-mac/macbook-pro
What’s in the box.
MacBook Pro
Power adapter, AC wall plug, and power cord
No install media (CDs or DVDs) are included with Macs anymore. -
I have a factory unlocked iphone 4s ios 5.1 and let me know if I can upgrade to ios 6?
I have a factory unlocked iphone 4s ios 5.1 and let me know if I can upgrade to ios 6?
The conclusion I have arrived at during the limited time I have been reading indicate that there is a growing number of people complaining about the iOS 6 upgrade. According to Apple tech support they currently have no fix for any of the issues and they indicated that there are a large amount of calls coming in.
-
I lost my Iphone and I need IMEI number, but I have only serial number. Can I get IMEI number through Iphone serial number ? if possible please help and let me know how
If you go to the computer where your sync your phone to and open itunes and then go to edit in the tool bar then preferences then device preferences then devices.. hover the mouse pointer over your device name in the back up lists that appear there and it shows the IMEI
Maybe you are looking for
-
Combined Report for Purchasing and Inventory Management.
Hi All, Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one. Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty an
-
How to select server in which background job should run
Hi, I want to run my program as background job. I want the user to select the server, in which background job should be run, in the selection screen of my program. When it is sheduled in background the job should run in the selected server. How to do
-
My email attachments won't open after ios7.1 update on 4s! HELP!
I recently updated my 4s to the new software, iOS7.1. Since then, my Word document email attachements are not opening. When I try and open attachments I just get a message saying "OfficeOpen XML word processing document" on a blank screen. All attach
-
I updated Firefox and the "homepage" button is gone, how do I get it back?
I need to be able to hit that cute little picture of the house, but it doesn't seem to exist in version 4.0.1
-
I have a student who when he tries to batch rename his .jpgs in Adobe Bridge CS5.1, the files will become corrupted and will not be able to open them. The extension is off. How can I correct this for him?