I wiped my Mac on iCloud! Help me. Please. :(

Anybody, I need help.
My brother lost my ipod touch (2nd gen) and I went to icloud when I realised that I cant locate it because its old version....
Then I started playing with my mac on iCloud and I clicked WIPE. Then I didn't know what that means...
Now, 20 mins ago I started to install updates. Then my mac restarted. It is wiped now. You are wondering how am I here if my mac is wiped?
I clicked one button that sends you online to search for help, and here I am! Please help

new 5gb western digital hard drive
Awfully small for a new drive..... Been 10 years or so since drives that small were produced.
What is the drive, a Green, Blue or Black?
Is it a SATA Rev 2 (3.0 Gbps) or SATA rev 3 (6.0 Gbps)?
If SATA rev 3, did you install a jumper on pins 5 and 6?
Finally, what's the problem? Not seen? Can't format it?

Similar Messages

  • I can't install the new flash player on mac can you help me please??

    i can't install the new flash player on mac can you help me please??

    Yes I can, but...
    Click >About This Mac and let me know what OS version you're using.

  • Please email and I forgot the password icloud help me please,

    Please email and I forgot the password icloud help me please,

    Hi ali aldlemy,
    Thanks for visiting Apple Support Communities.
    You can use the instructions in this article to reset your password for iCloud:
    iCloud: Change your iCloud password
    http://support.apple.com/kb/ph2617
    Best Regards,
    Jeremy

  • Will wiping a Mac using iCloud remove the capability of tracking or seeing its location using iCloud?

    Hey,
    I recently had my MacBook stolen and it hasn't shown up on the find my iPhone iCloud service. I am currently tracking it and the cops know about it but I was wondering that if I were to wipe the MacBook remotely using iCloud would it make me lose the capability of seeing its location on iCloud.

    Yes.
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    Reporting a lost or stolen Apple product
    What-To-Do-When-Iphone-Is-Stolen
    Lost or Stolen iPhone? Here’s What to do.
    6 Ways to Track and Recover Your Lost/Stolen iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
    Find My iPhone
    Setup your iDevice on MobileMe
    OS X Lion- About Find My Mac
    How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Hijacked mac-unix gurus, help me please!

    This is a very weird situation, please bear with me:
    My ibook and desktop g4 were running 1.3.9, the plain consumer version. Or so I thought.
    But here is the weird part: after splitting with my ex, I found i had no root access on either of my macs - and no way to regain it.
    1.there is a Security Agent installed
    2.a Thawte security cerificate/ w key is in the ibook's keychain, the password encrypted and obviously news to me.
    3.the ibook HD is locked.
    3.Remote desktop agent, apparently running from ibook, controlling every aspect of the desktop.
    4. crucial logs are either missing or encrypted.
    To clarify, both machines are mine, but the ibook was used primarely by my ex, who claims to be computer illiterate.
    Who also denies any knowledge of anything.
    And now for the most bizarre part: the ARD, and network manager parts are hidden - the machines "look" ordinary.
    The whole operation is camouflaged in the most mind boggling way. By sheer luck, I stumbled on the ibook's "other" interface - just enough to note that the menu is different, and there are weird java scripts all over the place that trigger actions in ways I never saw in Kansas:
    example a: itunes extra library stashed in documents folder, which, when imported, added one mp3 file to itunes, but it was no tune - it's name: "connect to server".
    example b: expander alias on the desktop - if clicked launches the classic- which runs without showing in the dock, and launches something else...
    There are modifier keys involved, but i have no idea what they are - pressing the right ones gets you "in" (to OZ?), otherwise a bogus system preference is launched - I found the script that spells this out, AFTER I have seen it happen
    So, there is a very sneaky system within the system, but also very protected:
    Every time I wipe, zero all data etc, on a drive, after installing a brand new system....it then "rebuilds" itself to whatever it was before. Yup, complete with email addresses.
    So there is apparently an invisible volume on all my drives, where there are munchkins that track and rebuild whatever I
    "screw up" - most of all, tell the installer/disk util. how to "wipe".
    After 3 weeks of no sleep and sifting through hundreds of pages of logs and scrambled files...I realized whatever is on these two machines is certainly not a case of someone trying to hide the **** surfing; furthermore, I took the plunge and installed a new HD on the ibook, in hope to get rid of it all. At first, the Panther would not install on the new drive - but after I removed the airport card and the extra memory - the installation was fine.
    So, what in the world am I dealing with? Everyone I talk to says you can't hardwire any data into macs, but everything points to some doctored part.
    True, the new drive does not have the secret volume with X-serve on it, but SOMETHING is still there -sorry, I sound like Aliens script, but i have been reading logs on the ibook and there are a lot of weird apps, jobs and actions trying to launch, then quitting when they don't find the mother ship, that is the server, ftp or whatever.
    Please help me out.Until this, I knew nothing about java, and now i am in java ****.
    I basically lost both my macs, and what's worse, my IP and my personal name have been whoring on the web, and I have no way of tracking the ftp sites, it's all encrypted.
    The cops tell me no laws were broken because I lived with that person - who denies doing it, anyway.
    I am supposed to believe there is a Trojan, or a hacker who made it through the password protected network, reformatted my drives, installed the server software, ARD manager, iChat
    Agent, Security Agent, deleted all important installation logs, oh, and "upgraded" my ipod as well.
    I have text files and many screen shots, if anyone is interested.
    Thank you for having the patience to read through this rant.
    ps: just to save some time: open firmware, single user, sudo, password reset - nothing works in that sneaky ****.
    Thank you.

    "But here is the weird part: after splitting with my ex, I found i had no root access on either of my macs - and no way to regain it."
    Here's a question: have you gone in to NetInfo Utility confirmed that root is enabled under the Security menu?
    "there is a Security Agent installed"
    There is always a security agent installed. How do you think this security agent is messing with your system?
    ".a Thawte security cerificate/ w key is in the ibook's keychain, the password encrypted and obviously news to me."
    That just means your ex surfed the web and bought something from a merchant who issued her a Thawte certificate. When that happens, OS X will offer (or perhaps automatically) store it in the user's keychain.
    "The ibook HD is locked."
    What do you mean by that? you should not be able to copy files to system directories or other user's directories. without first gaining administrative access. Do you have an admin level user account? Did your ex? I suppose it's possible she disabled your account's admin privileges. You can check under Accounts in System Preferences (you may have to boot from your Panther install disc and use it to reset your ex's password
    "Remote desktop agent, apparently running from ibook, controlling every aspect of the desktop."
    What do you mean by every aspect of the system? Is it controlling the mouse? Is it controlling behaviors or configurations? Does it show up in Activity Viewer?
    "crucial logs are either missing or encrypted."
    which logs?
    "The whole operation is camouflaged in the most mind boggling way. By sheer luck, I stumbled on the ibook's "other" interface - just enough to note that the menu is different, and there are weird java scripts all over the place that trigger actions in ways I never saw in Kansas:"
    Please tell us how you stumbled on the other interface and what sorts of actions these javascripts trigger.
    "There are modifier keys involved, but i have no idea what they are - pressing the right ones gets you "in" (to OZ?),"
    how do you know pressing a certain combination gets you in? in to what, exactly?
    MacBook 1.83 2GB RAM Mac OS X (10.4.7) XP SP2 Fedora Core 5 Debian 3.2 SLED 10 Plan 9 (god i love Parallels!)

  • Trying to open Premier Pro 1.5 PC file in Premier CS3 on Mac... help! pLEase!

    I have an old demo for my business that I'm trying to add to, and insert new footage.  This version was last done in Windows XP on a PC with Adobe Premiere Pro 1.5.  I'm now using a Mac and want to be able to open this with Premiere Pro CS3 on my mac, and edit with all elements in place as is.  Is this possible? 
    The error message says it can't open it and to consult the manual, which I don't have with me while I'm on the road traveling. 
    I would be SO grateful if anyone is able to help me out.
    Warmest Regards,
    [email protected]

    Let's see if I can get this right. Pr through 6.5 was X-platform, and then with PrPro 1.0 (often called PrPro 7.0, or Pr 7.0 - yes, confusing), Pr went to the PC platform ONLY. Then, with CS3, PrPro became X-platform again. What this means is that if a Project was created with PrPro 1.0 thru PrPro 2.0, it was ONLY on the PC. To Open one of those Projects on the Mac, one must find a user on the PC with CS3, and get them to Open that Project, then Save (would do a Save_As, or Save_As_a_Copy to keep the original intact), and then Copy that CS3 (converted) Project to the Mac. The trick is finding a person with CS3 on the PC, and asking for help. If I had CS3, I'd gladly do this for you. Regardless of what some ads might indicate, PC-users are really nice people. There should be some PC-users with CS3, who will offer to help you. The process is very simple, takes but moments, and the biggest issue is just getting the files (not really THAT large) back and forth.
    Were it me, I'd Copy things over to an external (note: to be X-platform, that must be FAT-32 formatted, and could prove to be an issue with the ~ 4GB file size limit) HDD, with everything on it, then ship that off. If one just works with the PRPROJ file (Project file), there will need to be some Asset re-linking, but that is not the end of the world.
    Good luck, and if you do not have a PC friend with CS3, wait for some offers to pour in.
    Hunt
    PS - BTW - where do you reside, as that might make things easier?

  • Icloud help, urgent, please help

    I need to use icloud to backup my photos but it says I have 10.3 gb of stuff to back up (I only have the free 5 gb to use). I turned of icloud backup for everything on my phone except photos, which I have 2.2 gb of, but it wont work. Please help me

    You probably have a lot of texts with attachments that can't be turned off.    Those are automatically part of the backup.
    Turn on Photostream also to get your photos backed up.  The best method is to backup to your PC.

  • New mac user, mail help needed please

    I have 2 mail accounts synched in my mail. My comcast account is operating fine. My mac account I am not receiving messages. I can send them, but I do not receive. I have a small circle with a small pie slice grayed out, beside my inbox which says messages stored on server. I have used the connection doctor and everything appears ok. I do get an error message when I close mail which says;
    _*Some actions taken while the account “[email protected]” was offline could not be completed online.*_
    _*Mail has undone actions on some messages so that you can redo the actions while online.*_
    _*Additional information: Operation could not be completed. (MFMessageErrorDomain error 1028.)*_
    Any help would be appreciated.
    thanks
    jeff

    Sorry. It was worth asking.
    How about this:
    In Mail preferences, click Accounts, select the dotMac account, click Advanced and un-check "Enable this account." Then quit Mail and launch it again, and go back and enable the dotMac account.
    In Mailbox Behaviors, un-check "Store sent messages on server" and "Store junk messages on server," and also "Store draft messages on server," if any are checked.
    Then quit Mail and re-launch.
    Check your dotMac mailbox by logging onto .Mac and make sure you have plenty of free disk space assigned to your mail account.
    Worth a try.

  • I just downloaded the newest version of Adobe Reader to my MAC, I need help now please

    The End user license agreement did not appear to sign and accept.  So now when I open another site to download pdfs, it says I need to launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
    I cannot  launch Reader to get to the End User Agreement.   Can you help me please

    What happens when you try launching Reader?

  • Considering going Mac...help/opinions please

    I currently have a custom built PC thats about 2 years old running Windows XP and Office 2003 (2gb memory, 2.9 ghz intel processor, 256 mb video card, 120 gb seagate s-ata hard drive, etc. I have been contemplating switching over to Mac due to all of the great things i have heard about the systems. I intend on using a student discount and am focusing on a macbook (pref. 2.2 ghz core duo, 2gb mem, 120 HD, etc) with Office 2008 for mac and the apple service plan.
    My questions are:
    About what time frame is the next generation of macbook expected/estimated to be released and at what price (in comparison to the current macbook).
    How truely reliable are these systems? I see a lot of you all posting on here about problems as well as pleanty of people seeking assistance at the Genious Bar in the apple stores; do they really break/fail/glitch that often?
    What is the "accessory kit" included in the macbook package?
    How does the windows system perform/operate using the mac hardware?
    If there is anything else that you all think i should know or feel like sharing, please, be my guest. Thank you in advance for your replies.
    Shaun

    *About what time frame is the next generation of macbook expected/estimated to be released and at what price (in comparison to the current macbook).* We're just Mac users. Speculating on such things is I believe against forum rules.
    *How truely reliable are these systems? I see a lot of you all posting on here about problems as well as pleanty of people seeking assistance at the Genious Bar in the apple stores; do they really break/fail/glitch that often?*
    My experience has been very positive. Mac's are as reliable as any electronics I've owned. I use Windows at work and Mac OS at home and while I won't say that OS X is absolutely rock solid I think it's as close as you can get. If you read these forums you'll find that many of the problems here are self inflicted, ie: I poured water on my keyboard after I formatted my hard drive, but that was after I dropped my Mac, I have my life on my computer and no back up how do I get it back? It's frustrating sometimes. As this is a user to user forum most of the posts are going to be searching for an answer for some type of problem. Often the users, especially in the MacBook forum, are new to Macs and really just don't know what they're doing yet.
    *What is the "accessory kit" included in the macbook package?*
    I'm not sure what you mean by "accessory kit". Here's what's in the box:
    • MacBook
    • 60W MagSafe Power Adapter, AC wall plug, and power cord
    • Lithium-polymer battery
    • Apple Remote
    • Install/restore DVDs
    • Printed and electronic documentation
    *How does the windows system perform/operate using the mac hardware?*
    I don't use windows on my Mac. From what I'm told and have read here, windows runs pretty darn good on Mac Hardware. I think it's going to depend on what you're trying to do in Windows.
    I know several people who have switched. Some use Mac OS exclusively, some use a blend of Mac and Windows, BUT.....I don't know anyone who has switched back.
    Once you go Mac, you'll never go back!

  • Hello, i have iphone and this is blocked in icloud. help me please

    hello, i buy iphone in ebay and when it comes with me this phone is blocked with icloud and seller did not tell me his apple id and password and i can not activate this phone and what can i do now? i live in country of georgia and i can not refund phone i need activate only phone.

    Hello modzmana,
    Congratulations on your new iPhone!  It sounds like your new iPhone has Activation Lock setup by the previous owner.  I am sure you are eager to start using your new iPhone, but before you can, you will need to contact the previous owner to be able to use your new iPhone:
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    The previous owner can follow the steps below to remove the iPhone from their account:
    If the device has already been erased
    If the previous owner is not present
    Contact them and ask them to follow these steps to remove the device from their account:
    Sign in to their iCloud account at www.icloud.com/find.
    Choose the device from their Find My iPhone device list by clicking All Devices and selecting the correct device.
    Click "Remove from Account" to remove the device from the account.
    After the device has been removed from the previous owner’s account, turn it off by pressing and holding the Sleep/Wake button located on the top right side of the device. Then restart your device and proceed with device setup as you would normally.If the device has not been erased
    If the previous owner is not present
    Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
    Sign in to their iCloud account at www.icloud.com/find.
    Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
    Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
    When the erase is complete, click "Remove from Account" to remove the device from the account.
    After the device has been erased and removed from the account, you can proceed with the device setup process.
    You can find the full article here:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/TS4515
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Mh, My ipad lock by icloud, help me please, My ipad lock by icloud, help me please

    I have only serial :(

    1. Reset iPad
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

    How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

    Settings>general>resets>erase all content and settings.
    That will put it back to its out of the box state. Set it up with your own apple Id.

  • I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help

    I have downloaded a Maverick OS X 10.9.4 and installed it on my Mac from a USB, and i can't receive a Verification Code via SMS when setting up the iCloud Keychain. Please help.

    Hello, Kutoz. 
    Thank you for visiting Apple Support Communities. 
    Here is some information that you may find helpful with this issue. 
    I'm not receiving the verification code via SMS.
    Make sure that you have a strong cellular network connection on your phone.
    Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
    Make sure that the correct phone number is associated with your account:
    iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
    OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
    If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
    Get help using iCloud Keychain
    http://support.apple.com/kb/TS4644
    Cheers,
    Jason H. 

Maybe you are looking for

  • JDeveloper 11g Using EJB, JPA AND ADF DOES NOT WORK IN VERSION 11.1.1.1.0

    Hi all, I'm facing serious problems after the migration from jdev 11.1.1.0 version to new release 11.1.1.1.0, as i published with a sample at Problems with create new record o in JDev 11 R1 is this a big bug in the ide? Should i return to previous ve

  • BB APP WORLD IN APPLICATIONS BUT NOT SHOWING UP IN DOWNLOADS !!!!!!!!!!! HELP

    BB app world is in my applications so it is downloaded but i cant actually open it be cause it is not in my downloads help

  • USB Upgrade Question

    I want to upgrade to usb 2.0 in my powermac G4 MDD dual 1.0GHZ. Can I just use a PCI USB card like the one on Macconnection? http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=462745

  • Debug weblogic.properties conversion error

    All, I'm attempting to use the web console application/Convert weblogic.properties link to perform a propterties file conversion. I'm getting a conversion error when converting our current weblogic.properties file. This properties file is working fin

  • How to invoke Matlab from Java

    Hi, I want to pass some data generated from Java class to Matlab, then invoke Matlab from Java to run the computation program (file written in Matlab, myfile.m). I know Matlab can use classes generated from Java, how to drive Matlab from Java? I appr