I wirelessly connected a canon airprint to my iphone but can't get it to print landscape only portrait

first time using this site. Question per above is successfully connected a canon airprint with my network and iphone. Have successfully printed portrait style but can't figure how to print a landscape.
Thanks

Ringtones (along with audiobooks) are currently a one-time only download from the store. If you want it on your iPad then you will need to connect the phone to your computer's iTunes and do File > Devices > Transfer Purchases (it shoudl copy over to the Tones part of your iTunes library), and you can then sync it to your iPad

Similar Messages

  • I can see my wireless printer in devices, but can't get it to print

    I have a new MacBook Air and cannot get it to print to my existing wireless printer. I can see it in Devices and Printers, but it just cycles on "Connecting to Printer" then times out.

    Hello there sjbrosjbro,
    It sounds like you are not able to print to your printer because it keeps timing out when you try. I would use the troubleshooting steps from the following article to help you get that printer going again. It may be something as simple as re adding the printer if you've already restarted both the printer and the computer already:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • WRT110 Wireless Router Has Right Info about Internet Router but Can't Get to Internet

    Hi,
    I've been reading a number of posts here on the inability of people to get the WRT110 to reach the Internet via another router/firewall, but I think that this is a different enough scenario - or diagnostic - that it's worth a separate thread. Thanks for all of the expertise that's out there, I'll need it!
    Broadband Firewall Router: Linksys BEFSX411.On 192.168.1.1, standard address range for DHCP, 100-149. One leg off this router goes down to two other wireless routers and a PC, all working fine.
    On the fourth port of this router I have attached the WRT110, BEFSX411 has assigned IP address 192.168.1.101, the WRT110's native address is 192.168.1.5. When I put a PC on the BEFSX411's LAN I can ping 192.168.1.5 and reach it successfully.
    If I look at the information on the WRT110, it has the correct DNS addresses out at my ISP's data centre. it APPEARS to have the right address for the BEFSX411 - 192.168.1.1. I can reach the admin functions of the WRT110 from a PC attached to its own LAN segment. DHCP addresses on the LAN side of the WRT110 are ranged from 102.168.1.140 on up, overlapping with the BEFSX411's range but well north of any likely direct assignments by that router.
    Wonderful. Now here's the sticker - I cannot ping anything on the other side of the WRT110 - yet it has the correct information in it about the entities on the other side of it via its Internet port. No DNS, no nothing. I am baffled.
    OK, now your turn. Please help.
    Many thanks,
    John

    BTW, this gave me the expected result - with DHCP turned off, the router has no facility to assign ports automatically, so nothing attached to it can communicate with it! Reset solved it, of course, but I thought that it was worth a try.
    I have swapped out my old Linksys router with the WRT110, it works fine as the sole router, wireless works fine, though I took some of the suggestions on this board to heart and enabled channel 11 only. My guess is that one could turn off the firewalling functions of the router and get it to work, but at this point it's not worth it. At least I have a good spare router now, just in case.

  • New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

    new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

    My guess is that the security settings on your router and iPod do not match.
    For a test, change your router so there is no security.  See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

  • Connected to the network, but can't get out to the Internet

    Here’s my problem… After my previous router died, I recently installed a Netgear wireless router (WGT624NA) with 128-bit WEP security, and created a new wireless network. My Powerbook G4 found the network, and I was able to put in my WEP password, and everything seemed to work fine … for a while. In the last couple of days, I can’t get to any Internet sites.
    I’m connected to the wireless network fine, with a strong signal level, and I seem to be able to Ping out. But when I try to go to (any) Internet site on Safari, I now get “Safari can’t connect to the server”. I’ve gone through the Network Setup Assistant, put in the correct WEP code, and after hitting “continue” from the “You’re now ready to try connecting… “ screen, get “Unable to establish a network connection”.
    I seem to be connected, but can’t get out. Help.
    Powerbook G4   Mac OS X (10.3.9)  

    Hi there,
    A UPS (Uninterruptible power supply) is a battery back up, so if you power goes out you can finish up what you're working on and shut down normally.
    I had a similar incident this week, power went out all computers, modem and router went out. After power was restored all started up fine and looked good. Wireless router showed I was connected to the internet but could not surf any site. I had changed my email account password several weeks earlier (email account provided by my ISP) and did not think this had anything to do my boradband connection, but I was wrong.
    To make a long story short, I had to update the password as it related to my broadband connection. The connection was there, it just did not recognize my new password because I had changed it... If you control the account and you've changed any passwords associated with account yu will have to update or your landlord will have to update... make sense?
    Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

    I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have.  would love some good tips.

    Try this:
    Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

  • Connected to the network but can't get online

    Hi there- I have a WRT54G router that is wirelessly connected to an ibook. There are times that there is an additional dell laptop that i need to get online with and although the dell says it is connected to the network (with excellent strength) it can't get online i get the 'problem loading page'. I have used more than one computer with this router before, although in a different apt with a different provider (if that matters). Anyway, this is truly annoying so if anyone has any insight that would be great! I did read in the forums that its possible there is only one IP address, and admittedly my knowledge of networking is basic at best, i know that more than one computer has been connected in the past. I did try turning off the mac then connecting the Dell and it still didn't work. Thanks in advance for ANY advice! Sara

    Hi . go through this link for reference . Here , under the "basic wireless settings" subtab , you need to change the wireless network name to any non-linksys name and change the channel to either 1 or 11 .

  • Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

    If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

  • Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?

    Welcome to the Apple Community.
    The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay.

  • I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    I have a Firewire 800 external hard drive and need to connect to my new MacBook Air.  Where can I get the correct cable?

    Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

  • I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

    You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
    If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

  • HT4623 i bought an ipod touch got itunes downloaded on my computer but can't get it to connect to ipod because it is locked it was locked when i bought it how can i get it un locked

    i bought an ipod touch and i got itunes downloaded on my computer but can't get it to connect to ipod because it is locked it was locked when i bought it how can i get it unlocked?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

    Just got an iPhone and can't get iTunes Match to connect. Keep getting a message that I'm not subscribed, but already did on my pc. Any ideas?

    You must be signed into the mobile iTunes Store using the same Apple ID you used to originally purchase iTunes Match. On the iOS device go to Settings > iTunes and App Stores and tap the Apple ID. Log out, then log in with the correct ID.

  • I have a imac 10.6.8 with snow leopard. Just upgraded to iphoto 11 Now my computer keeps freezing up mostly if my iphone is connected.  It even freezes in safari.  Can i get my money back and unistall

    I have a imac 10.6.8 with snow leopard. Just upgraded to iphoto 11 Now my computer keeps freezing up mostly if my iphone is connected.  It even freezes in safari.  Can i get my money back and unistall

    This forum is for people to discuss issues with other users. Apple aren't here. No one here can give you your money back. So, contact the the App Store support, if that's where you bought it. There's a link on the right hand side of the App Store window.
    Regards
    TD

  • I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    If you go to Photoshop>About Plug-in and click on the words Camera Raw, what version does it list?
    I suspect you still have Camera Raw 7.0
    When you go to Help>Updates from within photoshop cs6, it says nothing available?

Maybe you are looking for