I woke this morning, And found my i phone 4 in a dead condition, and tried to charge, It is not getting started and is completely dead,why ?
I woke up this morning and found my iPhone 4 is off condition, With the assumption that is needs to be charged, I tried to hook up for charging, I haven't succeed in this attempt, The phone is not getting started, even i charge it, Help me out.
Try a reset:
- hold the home button and sleep/wake button down at the same time for atleast 15 seconds
- if you see the Apple logo appear rlease both buttons
If that fails try charging the iPhone while plugged into the wall adaptor and also while plugged into the computer. Try cahrging both ways for atleast 15-20 minutes. Also while its plugged into the computer check and see if the computer or iTunes will recognise that the iPhone is connected.
Similar Messages
-
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
apple phone 3g is not getting started and i can find only apple logo when connected to system and my system is not recognizing the mobile device. kindly help me in this regard
Put the device in DFU mode (google it) and restore as new.
-
hi guys... iam stuck in a problem what can i do because my iphone is not gettin started after the restoration process and its showing me a itunes symbol and a usb port
can anyone help me
-
Hi All,
I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
Looking forward for your help.
Thanks in Advance.
SunithaBelow is the solution.
Solution:.
check
list in workflow manager server :
1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
”WorkflowMgmtPool” is started 3. Following services are running
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service (FabricHostSvc)
4. Get workflow farm information , workflow database by Start Workflow
Manager PowerShell get-WFfarm 5. Check if the Workflow Manager farm running(workflow service backend and front end should be rennin) by Start Workflow Manager
PowerShell get-WFfarmStatus
6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
7. Restart the WorkflowServiceBackend service
net stop WorkflowServiceBackend
net start WorkflowServiceBackend
Reference Link
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
Thanks all.
Sunitha -
The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.
Upgrade your browser to Firefox 8 and check
* getfirefox.com -
HR iViews are not getting displayed and showing "Page can not be found".
Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PMHi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas -
i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME
Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W. -
I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?
Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd
-
After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."
If you don't get the message, your phone is NOT unlocked.
-
i chose an option which replaced 'bookmarks' in the menu with most visited, getting started and latest headlines. I want to go back to the default, simply 'Bookmarks' How do I do this?
<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History...Help)? Hold down the key ( key in OSX) and press the following letters in this exact order: V T M
The Menu Bar should now be displayed permanently, unless you turn it off again (View > Toolbars). Turning the Menu Bar on and off is a new feature in version 3.6.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
<u>'''See other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]''' -
Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?
Sign out of the iCloud control panel and then back in.
-
my ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.1.x
iPhone 4S iOS 8.x.x
iPhone 5 iOS 8.x.x
iPhone 5c iOS 8.x.x
iPhone 5s iOS 8.x.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 8.x.x
iPad 1 iOS 5.1.1
iPad 2 iOS 8.x.x
iPad 3 iOS 8.x.x
iPad 4 iOS 8.x.x
iPad Mini & Mini Retina iOS 8.x.x
iPad Air iOS 8.x.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all! I NEED HELP OR MY MONEY BACK NOW!
There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
tt2 -
After my phone 4 was upgraded to iOS 5, my iphone 4 has been getting slower and slower. It's really annoying. How to solve this problem?
hi Allan,
Can't make or receive any calls. When making a call, you see the thing dialing but no tone, it rings at he other end however. When somebody trying to call me, it does not ring at my end. If you try to end the call, the phone page will just freeze, when you exit the phone page to go try the MP3 player for example, and come back, the phone is still trying to end the previous call. I tried resetting the network settings, turn the phone off and on , no difference at all. It's easter Sunday, everything is closed here in Montreal.
Maybe you are looking for
-
Unable to view BI Publisher report with SSO configuration enabled
Hi All, Can anybody let us know the configuration of the BI publisher with SSO enabled. We are unable to see any of the BI Publisher reports. without SSO configuration we have integration working perfectly fine with the OBIEE and Publisher. We follow
-
Exception while running a test file as JUNIT test case
Hi, I am trying to build a code using Eclipse to generate an "ear" file that can be used for deployment. The ear file is generated successfully but the build is not successful as the following exception is thrown while debugging a junit test case: ja
-
I have a problem editing one page on my site. When I was publishing it the server connection was lost. Now no one can edit the page. There is no *.lck file nor do any users have a draft of the page. Contribute is not providing any error message; clic
-
Can I use Logic 9 on a G5 with Leopard
Is anyone using Logic 9 on a G5 Quad-core with Leopard? I have been told by tech support that it won't work, but I have heard from other people that it will. Before I buy it, I would just like to make sure it will run. Any feedback would be helpful.
-
Hey everyone, I'm not sure how to explain what I need. I have a solid symbol with several grouped items. On the stage, I need to create a transparency that increases from top to bottom. For example, in Fireworks, you can create a tranparency mask ove