I won an ipad2. Wow! How do I find out if my ipad2 is 3 g?

How can I tell if my ipad2 is 3G and what operating system I have 4.3 or 5.0? I was fortunate to win the I pad but have zero directions.

If you have a cell phone that supports tethering (preferrably not one grandfathered into unlimited data), you could use the cell phone as a wireless hotspot for the iPad. It's actually a better deal on AT&Ts US plan to use your phone to tether, providing you don't have unlimited data still on your phone. Last I checked, it cost about the same for the same ammount of data but with tethering, the data was shared between the two devices, meaning you could use more of the data for the iPad. The same data usage could end up costing more since the devices do not share the same data plan.
I would take a look at your phones data plan and compare separate and combined data plans to see whether it's even worth trying to sell the iPad to get a 3G model. The only other benefit the 3G model has is the assisted GPS.

Similar Messages

How do i find out if my pavilion has gigabit ethernet

HP Pavilion p7-1007-c
windows 7 64 bit
got a Vizio router but I have been unable to get it to work.
I read that if you have gigabit ethernet it won't work so
how do I find out if I have gigabit ethernet?
I have tried calling Vizio and my cable provider but they were not
real helpful.
This question was solved.
View Solution.

Integrated network:
LAN: 10-Base-T
Technology: PCI Realtek RTL8105E
Data transfer speeds: up to 10/100 Mb/s
Transmission standards:10-Base-T Ethernet

I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

HT201303 How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

How can I find out what my security answers are? I am trying to purchase an app on a new device and it won't let me without answering and I have totally forgotten

Welcome to the Apple Community.
You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.

Film won't render. Error is like: error in frame 3490. How do I find out what is wrong? How can i find the frame numbers?

Hello
Who can help me? I made a movie in Final Cut. Not a special one, some text and that's all. With scenes from mu Sony camera, I imported. When i want to share the movie (to facebook, youtube, or masterfile), it won't work. It loads upto 57% or so and that it quits, and gives error code:
the operation could not be completed because an error occurred when creating frame 3490 (error -1).
And now? I can't find framenumbers? How can i find out what's wrong. I tried everything. The film plays well in playback. I just can't make a filmfile.
Xandra Storm

Like Tom said, you can locate the offending frame by switching in Preferences->General the Time Display to "Frames" (that is how it looks in 10.1; I believe that in older versions the same preference might be in Edit or Playback preferences, I can't recall exactly).
When this error occurs, it can usually be solved by deleting render files, or by replacing the clip where the problematic frame happened.

My MacBook Pro is running very slow. How do I find out what is causing this?

How do I find out why my MacBook Pro is running so slow? Then how do I fix it?

Suggestions of Things You Can Do To Help A Slow Computer
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

How can i find out the file size of a Keynote on an iPad please?

How can i find out the file size of a Keynote on an iPad please?

I think a rule of thumb is what you're looking for.
Full bandwidth CD audio (AIFF): about 10 MB/min
Apple Lossless: about 5 MB/min
MP3 @ 256k: about 2 MB/min
MP3 @ 128k: about 1 MB/min
Of course the MP3 file size is exactly linear with bit rate.
As for sound quality:
Apple Lossless is, as the name says, lossless.
MP3 @128k: fine for listening in the car or the kitchen etc. If you have an audiophile sound system, this will remind you why you spent all that money.
MP3 @256K: barely distinguishable from CD on very good equipment.
MP3 @320K: probably not distinguishable from CD.
I presume that since you're talking about importing classical CDs these are ones you own. Remember you can always do it again if you need higher fidelity or if better technology comes out. I import most CDs at 128k, since most of my MP3 listening is in the car, or walking, or as background. And I can always play the CD if I want to sit and listen.
The logic for purchased music is totally different -- you probably won't get to upgrade that without buying it some different way. So buying 128k MP3s (or AACs) is something you'll probably regret later. Buying 256k MP3s is a lot less problematic.

How do I find out which programs of mine will not work with Mountain Lion?

I recently upgraded to Lion and found that all of my Power PC based applications wouldn't work (much to my surprise, as no one at Apple told me this when I inquired about the upgrade, nor is it listed in the App Store). Had to get a whole new Microsoft Word suite - after the fact.
Now, I just got an email from Intuit saying that if I upgrade to Mountain Lion I will probably have to upgrade to the latest and greatest version of Quickbooks (unless I create a partition, which is waaay too complicated for me). How do I find out what ELSE won't work if I upgrade to Mountain Lion?
Mac OS X (10.5.8)

Here's a compatibility guide by a 3rd party. I can't attest to the accuracy.
http://roaringapps.com/apps:table/tags/_a/index_tags/_a

How do I find out and the delete "other" files being stored on my drive?

My Mac Air HD says it has 17 GB left of free memory space.
76 GB says of "Other"
How do I find out what "other" is, and delete it to free space.
This is a brand new, Mac. I just got it in December and I have no pictures saved in it.
Thank you

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

How do I find out what the red exclamation mark or "error" on page refers to in a book that I want to send to print?

How do I find out what the red exclamation mark or "error" on page refers to in a i-photo book that I want to send to print?

If it's a text box it means the text has overflowed the boundries of the box. Check for line returns which won't be visible but will trigger the warning.
OT

How do I find out what "Other" is, in the "About this Mac", storage details bar graph?

My new Mac Book Pro with 250 GB Flash Storage is already full with only adding a few apps. I purchased the new Final Cut Pro X, but store all video data on an external drive. Whats up? Why is 146 GB used up with "Other"? What is "Other!?" How can I find out the details of what's in other, and get rid of what I don't want or use?

First, empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

How do I find out what app is connecting to the internet

Something on my iPhone 4 (fully updated) is constantly trying to connect to the internet via 3G, costing me a lot of money when I am not connected via WLAN! I can't work out what it is, but presume it is an app. How can I find out what is doing it?
I have tried deleting the cache, resetting the phone, etc. Nothing has worked. I even turned off 3G, cellular data, etc. and it STILL connected. How does that work?!
Can anyone help?
thank you!
kind regards, Gordon

thanks for the reply but are you sure about this? What difference would it make? Why 5 apps?
Even if it does work, which I doubt, at some point, I will have to resync ALL my apps again and surely the same thing will happen again, and I will be none the wiser. I still won't know which app it is. There must be a way of finding this out.
Any ideas?
What is really freaking me out is how it is connecting to my carrier (who is charging me) with Cellular data switched off.......?
Thanks again.

How can I find out which DLL version is on the end-user's computer?

I'm working on an installer program and I was wondering how I can find out what version of a DLL is on the end-user's computer, furthermore I would also like to find out if the file is locked in memory. Is there a way to do this? I figured natively there wouldn't be but does anyone know of a C++ wrapper or so?

I'm not aware of any way of seeing the list. Have you had other computer's in the past and/or updated the OS on your current computers without first deauthorising them ? Deauthorising all (which you can only do once every 12 months) won't remove any content from those computers, it just means that you won't be able to use the account's content on a particular computer until you've reauthorised that computer

How do I find out what is causing a random black screen on iMac?

Hello I get random black screen on a iMac and I haven't made any hardware changes. How can I find out what is causing this?
Thanks
Jer
iMac 2.66 core 2 duo with Snow Leopard 10.6.8

You can do an SMC and PRAM reset. These won't hurt anything and 'might,' maybe help the screen issue. If it doesn't, then take it into an Apple store or AASP for their guidance and advance testing diagnostics.
SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Mac Air 11" - how do I find out what files are showing up in "About this MAC" Storage "other" category?

Hi - I am having storage trouble with my storage. When I go into About this Mac, Storage, the category "Other" has a very large amount of gigs stored. I have already dumped my email, downloads when in to Trahs, emptied secure trash, etc. How do I find out what is included in the "other" category?

First, empty the Trash if you haven't already done so.
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste (command-V) into the Terminal window. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

How do I find out when a I calendar event was declined by it invitee?

How do I find out the date and time a I calendar events invitation was declined?

i'm not entirely sure about the new tab page - in principle it will use an algorithm which populates the slots based on the frequency & the recency of visits. however i think that sites removed from the history should also disappear from the new tab page (when i tried it it was at least true after i've restarted the browser once) - if this isn't happening for you then it might be some bug...
in any case firefox won't have the proper features to reliably monitor your kids' browsing behaviour - they always can use private browsing mode where no traces will be left on the pc or manually "clean up" the history.

I won an ipad2. Wow! How do I find out if my ipad2 is 3 g?

Similar Messages

Maybe you are looking for