I work for a funeral home that has used Photoshop CS2 for years.

I work for a funeral home that has used Photoshop CS2 for years.  Within this program, we were able to upload a background "file" with themes - i.e., spring flowers, fall leaves, etc.  We would scan in pictures given to us by the deceased's family and "place" these on top of the background slide.  We then used a software program, Nero, to create a slide show with music to play during the viewing.  I've spent some time looking over the products and do not see one that will allow us to continue this very simple practice.  I would appreciate the opportunity to speak to someone about this.  Thank you.

Newer versions of Photoshop have new feature that CS2 does not have. However CC 2014 like CS2 does not have a slide show with sound feature.  I have a Windows 7 Pro system. Have CS2, CS6, CC and CC 2014 installed.  You need and Updated CS2 Installer to install CS2 on windows.  CS2 is a 32 bit Photoshop there is no CS2 version that will run on new Mac computers their 64 Bit OS offered no 32bit options.
A $10 a month subscription will keep up to date with the latest Photoshop.  Your other option is to buy CS6 for $700.  CS6 is no longer supported it just marketed as is.

Similar Messages

  • Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

    Good night, I am just starting in bussines design, i am not rich enough to buy photoshop license, but i'm loved to use photoshop, could i use photoshop cs2 for free version? Thanks alot for your attention.

    There is no free version of CS2.  There is only a special version of CS2 available for people who purchased it and need to reinstall it.

  • I have used Photoshop CS2 for over 5 years with Dimage A2 using the RAW forment, Now it will not work. Any answers out there? Thanks

    The Photoshop has always worked well with the Minolta DimAge A2 using the RAW format. Now, it will not.  Strange that Corel Paint Shop Pro X2 Ultimate works fine and cost less tha $100...  Any responses out there about that?

    They may know more in the Camera Raw forum.

  • I am trying to create a website for my fire department that has a search box for building number.

    I have a search box on my webpage, and I have all the data that I need in a folder.  Not sure how to link the data to the search box.  The desire is when a user selects a number( say 100) then it will display the cover sheet, and links to the drawings associated with that number. I have all documents (cover sheets & drawings) in pdf format. Any assistance will be greatly appreciated.

    Simple Site Search:
    http://php.about.com/od/phpwithmysql/ss/php_search.htm
    Setting up a PHP environment in Dreamweaver
    http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
    Building your first dynamic website – Part 1: Setting up your site and database connection
    http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
    Best of luck with your project!
    Nancy O.

  • Looking for a clock radio that has a USB slot for an old iPod shuffle (white).

    Any suggestion?

    Here are a few suggestions.  Just make sure that it's compatible with your model iPod.
    iPod Clock Radio
    If you are unsure of exactly what model and generation you own, see this article.
    Identifying iPod models
    B-rock

  • I have a question that I think I know the answer to, but am looking for confirmation.  I have a dell computer at home that has clip art available on it for putting pictures into documents.  Do I need to install an APP to get something similar to clip art?

    I have a question that I think I know the answer to, but am looking for confirmation.  I have a desktop computer at home that has clip art loaded onto it.  I recently got an iPad and am looking for something similar.  I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?

    Sort of.  There is an app called art shop that gives you a place to park clip art.   But I don't think you really need it. 
    If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
    You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over,  or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
    The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
    As near as I can tell there is not a ready made clip art collection in app format laying around.

  • I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

    I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

    In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac.  That would be Mac OS Extended (Journaled).
    PCs can also read and write to the Mac formatted drive.

  • AirPrint laser printer for home that has "n" wifi capabilities

    Looking for an AirPrint laser printer for home that has "n" wifi capabilities. Was shocked to findout that most lasers don't do "N" wifi or high speed networking yet. Am seriously considering the HP LaserJet Pro P1102w printer, but just found out it is a nightmare to setup. Thought I could run it by USB port off my Timecapsule… Is anyone doing that? Can it do that? Is there a better alternative?

    Hi Scott,
    You can also setup the P1102w without the USB cable. What you need to do is to connect the printer via ad-hoc to your iPad first. With the default network settings the printer has its own SSID that you can select from the WiFi list on your iPad. Then open Safari and go into the EWS - either by the printers IP or host name. There you go to Network - Wireless and make the settings for your infrastructure network.
    However, both Laserjets will need a FW update that you install from a Mac or PC, so you may already use the install steps there to connect your printer to the network.
    Regards,
    Mandy

  • Since upgrading iPhone 4S to new OS it has not worked. Now over 10 days with no phone, talked to Apple Care in Colorado and Australia over 10 hrs on phone 7 consultants. All that has to happen is for someone at Apple Care to reset a password? Help

    Since upgrading iPhone 4S to new OS it has not worked. Now over 10 days with no phone, talked to Apple Care in Colorado and Australia over 10 hrs on phone 7 consultants. All that has to happen is for someone at Apple Care to reset a password? Phone and Apple ID don't recognise each other. This is nuts!

    The phone will not recognise Apple if passwords or secret questions

  • I work on the CompactRIO 9068 that the password is lost for some time. Please help me to reset it, for finish my end of study project. Thank you,

    I work on the CompactRIO 9068 that the password is lost for some time.
    Please  help me to  reset it, for finish my end of study project.
    Thank you,

    but the page of ni support does not work:
    https://sine.ni.com/srm/app/newrequest
    and I have the recovery.cfg file from NI with this steps :
    1.        Copy the recovery.cfg file, found in the zip folder attached at the bottom of the email, to the thumb drive. 
    2.        With the cRIO device powered off, plug in the USB drive to the controller.
    3.        Hold down the reset button while powering on the controller.  Continue holding the reset button until the status light turns on, then release the reset button.
    4.        Wait for the controller to boot.  This should take less than a minute.
    5.        Check that the password has been reset to the default. (you will still be prompted for a password even if the default is blank)
    6.        Reinstall software to the controller. Using the USB reset will leave the system in a state where it is unable to run LVRT
      I have followed the procedure as mentioned 
    Result: the LED "Status" is permanently blinking.
    Would you please provide as with another alternative so that we can fix this issue.

  • By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    rajlego,
    in the Keyboard pane of System Preferences, select the Shortcuts tab, and then select Mission Control on the left-hand side. On the right-hand side, make sure that the Mission Control checkbox is checked, double-click on its current key combination (by default “^↑”) so that the key combination is highlighted, and then press the F3 button — that will set its shortcut to be F3. You can now press F3 to bring up Mission Control without needing to also press the Fn button.

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

    I have the same problem with my iPhone.  I set up a recurring calendar event for every Thursday.  That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete.  Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose.  I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
    The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar.  I went in to the calendar and NOTHING was scheduled for that day.  So why is this happening?
    So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
    I hope somebody else has found a fix, or at least a reason for why this is happening.

  • Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
    Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

  • I purchased a book through iTunes and it downloaded. I synced with my iPad. It shows the book is downloading but that has been going on for two hours and i still can't open the book.

    I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
    and then the 'Report a Problem' link on its line :
    and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
    Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for