I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's. When I export a qt from Premiere with audio it will not play on a pc only a mac. After extensive research I have narrowed down the problem to this: if you use the inspector in quicktime it looks like this
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Little Endian), Stereo (L R), 48.000 kHz
I have to run it thru AE to make it look like this....then it plays
DV, 720 x 480 (640 x 480), Millions
16-bit Integer (Big Endian), Stereo, 48.000 kHz
SOOOO the problem is the Little/Big Endian. I googled that and it looks like a file/bit structure....anyone know how/why to change it in Premiere? Because everytime I make a movie in Prem I have to drag the sequence into AE and render it there so the sounds works.....
thanks

Two questions:
1. What CODEC are you choosing when exporting on the Mac?
2. Do you have any Blackmagic hardware/software installed?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

Fine tuning nvidia quadro k4000 to work with premiere pro cc

Would anyone know the correct settings for nvidia quadro k4000 to work with premiere pro cc please?
Currently it's only using 33% of it's full power when rendering, while the CPU is running @ 95%
Mercury playback engine GPU is selected.
Thank you in advance

why would the encoder have the option to choose between mercury playback engine using GPU, or sofware encoding only!
From the article linked to earlier:
The video card and hardware MPE is not the holy grail. It helps in some circumstances to improve performance and rather significantly, but in other instances it does not help at all, as is indicated in the link above. People often think that installing a super fast video card will reduce export times by a significant amount of time. That is not true. It only helps in a limited number of situations. Keep in mind that:
Encoding to an export format is done by the CPU, not the GPU. No performance gain from a video card.
Frame rate changes, frame blending is done by a suitable video card, for instance exporting to 24P from 29.97i or 60P. Here there is a clear performance gain.
Scaling is also helped by hardware MPE, for instance going from 4K to HD or from HD to SD. Again a clear performance gain.
Rendering for preview is helped by the video card only for accelerated effects.

Does xavc long from a pxw x70 camera work with premiere pro cs6

Does xavc long from a pxw x70 camera work with premiere pro cs6

Take a look at this plug-in

Will card nVidia geforce GTx 760 work with premiere pro?

Will card nVidia geforce GTx 760 work with premiere pro?

Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
Thanks
Jeff Pulera
Safe Harbor Computers

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Blackmagic ultra studio sdi not working with Premiere Pro 8cc or A.E.cc(2014) on win7 GT630m i7 laptop - But works in A.E.cc(12.2.1.5)

There's a problem with the new update, as I no longer can use my BM Ultra Stdio SDI for monitoring. It let me select it but no image just black frame, with the new premiere pro cc 8 or a.e. cc (2014)
But i have No Problem in A.E. cc (12.2.1.5) work find just like it should, So what has happen here ? My system is Win7 Ultmate Laptop i7 Toshiba Satellite p850, dual gpu's GT630m & Intel HD 4000
With the latest blalckmagic drivers installed (10.1.1) This needs to be looked into, there is no way of monitoring accurately .

Problem Solved! (with a small catch)
While searching crashing issues I came across this thread,"Premiere Pro random crashing since update to 2014.2"
Marc_Lec Answered (and I paraphrase here)"...I had the same problem and this is what I did. In 'Preferences Memory' I increased the memory reserved for other application to at least half the installed and changed the optimize render from 'performance' to 'memory."
Thank You Marc_Lec for what has been a game changer for me since my last computer and the beginning of PremiereCC problems.
I changed my Memory reserved for Other Applications from the default 7gigs to 1/2 of my approx.31 available Gigs = 16Gigs. Viola!
No more crashing what-so-ever!
I still have to purchase an older GTX 980 graphics card to take advantage of Adobe's approved code to utilize X=Cuda Cores and GPU, but I think I'll hang onto my new TitanX, in hopes that Adobe will write code and approve it someday in the near future.
Now why doesn't Adobe say this officially about Memory Settings? (I don't know maybe they do and I missed I somewhere)
Mine and probably many peoples computers problems here on this board may be attributed to a simple Memory adjustment, because the computer needs more than 7Gigs to run itself, not to mention Premiere.

Switching tabs while working with Premiere Pro CS5

Hello there.
I am currently working with Adobe Premiere Pro CS5 and I notice that when I'm reproducing/previewing the timeline or am recording, for example, an audio track, everytime I switch tabs (switch to another window or to desktop), in this case the recording stops. I've searched around Preferences and in help files and I cannot find an option to make Premiere continue what he's doing despite me changing windows. Is this even possible? It would be very helpful.
Cheers!

>Is this even possible?
No... PPro must have full control of the computer to work... shift to another program and PPro stops

Can Adobe After effects cs5 work with Premiere Pro CC

I have a project I created in Adobe Premiere Pro CS5 and updated to Maverick which cause Premiere Pro to crash constantly. I downloaded Adobe Premiere Pro CC and was able to reopen the file however all media edited in After Effects cs5 shows media offline even though I am able to open up After effects and access the media fine. Is there a way I can bridge them together. It seems the after effects media is still connected to Premiere pro cs5.

Dynamic Link usually only works with the same version (the same suite) of the software. You can render your AE assets into a production codec and replace the dynamically linked compositions with the rendered files.
Alternatively, install AE CC (and manually install the required 12.0.1 update to run on Mavericks) and resave the files in your CC version. (This will only work if you have a CC subscription, the update won't work on a trial version. When the 12.1.0 update is released, you will be able to run that trial on Mavericks.)

Will other non-supported video cards work with premiere pro?

I have some older Dell Optiplex 755 and 760's that have limited space for graphics cards. Most everything that I find that will fit or I can afford are not on the Premiere Pro system requirements list of supported cards. Will others work?

Initial benchmark results with AMD cards show they are about two times slower than equally priced nVidia cards.
From: Tweakers Page - What video card to use?
To say that one solution is 2X faster across the board on comparably spec'ed cards would be incorrect.
Based on ...???
AMD and Intel cards used with the perpetual license are at least 10 x slower than nVidia cards when hardware MPE is turned on.

Does MXF OP1A work with Premiere Pro CC 2014, and later?

Is below formats can work through Adobe preimere CC
File Format: MXF OP1A
Filename extension : *.mxf
VIDEO and ADVANCED VIDEO:
MPEG Type: MPEG-2 Long GOP
Format Profile: 4:2:2@High Level
Video Resolution: 1920x1080(PAL) 16:9 DISPLAY
Frame Rate: 25
Bit-depth: 8
Field Order: Top field first
Deinterlacing: None
Max Bitrate: 50Mbps
Average Bitrate: 35 Mbps
Min Bitrate: 30 Mbps
GOP STRUCTURE: N=12, M=3 (Exam: IBBPBBPBBPBB).
AUDIO
Audio Coding: PCM
Sample Bit-depth: 24 bits
Sample Frequency: 48kHz
Audio channel: Stereo
Message was edited by: Kevin Monahan

It works with a caveat. There is a bug that has been reported here and has yet to be fixed. MXFs are fine to edit with and such, but if you are trying to export to them the resulting file can contain below black information that wasn't present in the original file. Check your exports.
Here is a thread on it:
Re: Data below black level 0 in h264 mp4 files.
(look at the waveform screen captures in the middle of the thread.)
I am still having to use CS 6.03 for all of my mxf exports until Adobe resolves this issue. Been reporting it for years now. It's a pain.

Encore not working with Premiere Pro

I downloaded the Premiere Pro cs3 trial version. I then upgraded it to the full version but for some reason cannot seem to export via Encore. It seems as if Encore is not installed or setup right? What do you think the problem would be?

If you installed from a download, so you don't have an install DVD, read the FAQ article
Converting Download Trial to Registered
(read subject
How do I convert a trial version to a version for unrestricted use?)

Premiere Pro 1.5 - crashing during exporting as movie

Premiere Pro 1.5 - been using successfully for years - same computer winXP - now it crashes (stops exporting) as making .avi.
Plus, when loading the program, keep getting prompt about a failed attempt to load ffdshow (not on white or black list?).   PLUS, sometimes program crashes when working with title editor.
I understand the custome rphone service is not available for the 1.5 version - again, been successfully using PP 1.5 for years - I've have change little on this computer ... other than xp updates.?
YES - I tried reinstall.   YES - I tried adobe updates.
Help!

I have read other messages saying that ffdshow can cause problems... you might go to the search box back on the main page and enter ffdshow
I have also read that a corrupt font can cause problems, with the advice to use a font manager to remove/relink fonts to find the bad one

PREMIERE PRO SLOW & NO RT FOR SOME QUICKTIME MOV

My premiere pro is very slow when loading a project of 45.5 GB source files. It takes about four minutes to load this project of mpeg 2 HDV files which it captured from my Canon XH A1. The files are located on an eSATA RAID 0 HDD partitioned to 2TB and 1TB respectively and is powered by Mapower TB 32 Raid controller.
Secondly my Mercury Playback Engine is not offering real time playback on some quicktime mov files. The footage is really choppy when playing back in CS5. These files have been generated and rendered in after effects using Animation as the compression type @ 1440 x 1080 25fps. In addition to that I have some stock footage 1920 x 1080 24fps from Actionbacks which have an alpha channel. These files are not playing back in real time, despite having the EVGA GTX 285 2GB GPU. Please note that I get a yellow bar but no RT at all and I can't even render them to get the smooth playback required. Anyone knows qhy is this happening?
The software is installed on C drive 250GB HDD which is about 70GB free.
I have got a Matrox RT X2 card installed with the beta drivers which is also exhibiting the same problem. But this problem is non Matrox project.
Is there anything I can do to improve perfomance and realtime playback here. I have invested a lot in my current system to the extend that I am now very disapoointed with the current perfomance.
Thank you for your assistance.
System
PP CS5
HP XW6600
Vista biz 64
EVGA GTX 285 2GB
Dual Quad Xeon 5450 @ 3Ghz (Total 8 cores)
24 GB RAM
3TB ESATA RAID 0
Matrox RT X2

I'd throw back to harm's explanation.
back and forth from 32 - 64, loading up quicktime server etc...
All I know is, on windows MS AVI, on OSX Quicktime(as if you have a choice)....
correction; as if I have a choice.

Composite view not working with Premiere Pro CC 2014

I've got a user in our office who, all of a sudden, can't see any image in composite view when editing in CC 2014 - the other views work OK and he's able to generate files OK, but he can't see the actual editable image in the editor. This is a problem .
Early '09 Mac Pro running Mac OS X 10.8.5. NVidia Quadro 4000 video card w/ latest CUDA driver (6.5.18).
Strangely, Adobe CC (non-2014) still works OK. And the user tells me that CC 2014 WAS initially working OK but that it suddenly stopped working. I've tried a reinstall; no luck.

Just found the answer:
Composite Video Not Displaying on Source and Program Monitors

I work with Premiere Pro on a mac and export quicktime movies to be played on pc's or mac's

Similar Messages

Maybe you are looking for