I would appreciated any help with solving the IOS 5 Error message -50
Did you expereince the same message? If so, if you can help me I would appreciate it. iTunes is uodated but when i ty to update my phone to IOS 5 I get the above error. Thanks for looking.
I am also having this issue, upgraded to ios5 however when attempting to back up my phone i get the same -50 error message.
iPhone 3G-S 16gb.
Similar Messages
-
When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
Help with Oracle AS Portal Error Messages
Hi
Our Application basically consists of a number of Reports which display data from a database, and Forms which will allow the insert of data in the table that the form is based on...
The application is used by business users.
I need assistance with the error messages that appear on Oracle Portal if something goes wrong - wrong data entered on a form for the database table, some error with a trigger that is called on the table where data is being inserted/ updated etc...
Currently, when an error occurs on the form (when you are trying to insert data into the database), the following errors can appear (this is an example of the actual format.)
Error: Internal error (WWC-00006)
An unexpected error occurred: ORA-20001: aft person ins
ORA-06512: at "RFS.RFS_AFT_INS", line 41
ORA-12899: value too large for column "RFS"."RFS_PERSON"."USER_ID" (actual: 22, maximum: 20)
ORA-04088: error during execution of trigger 'RFS.RFS_AFT_INS' (WWV-16016)
While this error will tell a developer what to do, it will not really tell an end user what the problem is...
I have started to edit the functions/ procedures that are used/ triggered from the forms to display a message in more or less the following format.
RAISE_APPLICATION_ERROR(-20001,'PLEASE NOTE: There is no XXX data for the XXX used. Please contact your administrator to assist.',TRUE);
What I want to know is, by changing the functions on the database etc, will I be catering for the errors, and will the message that I create be displayed to the user, or will they still see the original error message above?
Are there ways to display a more user-friendly error, even if just to say "Contact your administrator..." or something?
Any help will be greatly appreciated.
ThanksBy editing the default error messages, there is a risk the next patch or patch set to overwrite your customizations. A better approach would be to create custom error page(s) for Portal forms/reports.
Please refer to Metalink Note: 157132.1 How to Create a Custom Error Page for Portal Form.
Thanks. -
I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please
What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide. -
Need help to solve the following error
Hi, I m using JDBC driver for sql server 2000 in the program and when i get online it will hv the following error:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at Login.<init>(Login.java:26)
at Login.main(Login.java:196)
Exception in thread "main" Exit code: 1
There were errors
Can anyone help me to solve it? Thank you!Doesnt look like a java problem, rather a SQLServer setup problem - java can't connect.
:1433 is the default remote access port for MS SQLServer... so you should be right there.
1) Make sure SQLServer is set up for remote access
2) Dunno whats going on with the server name. it looks... odd. Try specifying the IP address of the server rather than the hostname
3) Just a final stab-in-the-dark thought.... but you mentioned it works when not connected to the internet, but not when you are connected.... could you be running a firewall (that starts when you connect to the net) that is blocking access through port 1433? -
Desperately seeking help with recording and playback error messages...
When I attempt to record a single track of audio (either with my internal mic or my Samson USB mic), I get the following message 15 to 30 sec into it:
CoreAudio:
Disk is too slow. (Record)
(-10004)
And when I attempt to playback that single track of a little bit of audio I recorded, I get the following message:
This song has too many instrument tracks to be played in real-time.
I have tried all the steps to solve the problem under "Optimizing Garageband" in the Help menu and nothing has worked.
I would greatly appreciate any suggestions that anyone has as to how I could get rid of these messages and actually enable myself to record a full song at some point in the conceivable future...I'm guessing that your computer is too slow to record
real-time audio.
Of itself it should be fine - I still use a G3 desktop to record stereo with no problems at all - though GB may add an overhead. Still, this shouldn't be happening.
If you have other tracks playing
while you are recording this could be an issue,
especially if there are a lot playing.
Yes...
If this is the
case then you can lock the tracks playing by pressing
the lock icon.
This won't make any difference to audio tracks, only to MIDI tracks, and in that case it reduces demands on the processor but increases demands on the disk - which appears to be the trouble in the first place.
I agree that you should consider
getting an external hard drive. You can set the
record path to the external hard drive
Since laptop disks are usually slower than external ones this might help - particularly if your internal drive is very full.
which will
free up working memory to your computer.
No it won't, but it will take the strain off the internal disk, if that's what you mean. The memory might be an issue, which would be resolved by installing more RAM if possible. -
Help with Coding and Warning/Error Messages
Can someone help me with Java Language to get SAP to enter through soft warnings and errors?
I am working to record/write a script to change orders but am hitting a road block when error messages pop up. I need to get it to enter through if the message pops up or move to the next step if not... there can be 1 error or multiples depending on the number line items.
THANKS!I'm guessing that your computer is too slow to record
real-time audio.
Of itself it should be fine - I still use a G3 desktop to record stereo with no problems at all - though GB may add an overhead. Still, this shouldn't be happening.
If you have other tracks playing
while you are recording this could be an issue,
especially if there are a lot playing.
Yes...
If this is the
case then you can lock the tracks playing by pressing
the lock icon.
This won't make any difference to audio tracks, only to MIDI tracks, and in that case it reduces demands on the processor but increases demands on the disk - which appears to be the trouble in the first place.
I agree that you should consider
getting an external hard drive. You can set the
record path to the external hard drive
Since laptop disks are usually slower than external ones this might help - particularly if your internal drive is very full.
which will
free up working memory to your computer.
No it won't, but it will take the strain off the internal disk, if that's what you mean. The memory might be an issue, which would be resolved by installing more RAM if possible. -
Help with php/cookies login error message
Hi
I'm working in DreamWeaver CS4, On a Mac 10.04 OSX system. I am using php and a cookies if (isset) function
Im trying to create and error message for users who try to login to the site. but can't because there is no connection to the database as of yet.
I have a connect srcript and a login script as well as the login and registration page.
when the user tries to login in I get a syntax error mesage instead of getting the phrase," A problem connecting to the data base. Please try again later."
How can I resolve this issue, Thanks your help it is greatly appreciated. To view the php code/connect script used in the login registration follow this link the script will available there. http://http://www.camtamkalaboration.com/products.phpjarmelo wrote:
how would I go about upgrading from tiger to leopard?
Buy Leopard, insert disk, follow instructions.
You can instal php (which is built into Leopard) by renaming a file and uncommenting a line then enabling web sharing in System Preferences but I use entropy because it has the GD enabled for CAPTCHA and other features. There's a 10.4 version on their website but it mentions it's an older, unsupported and probably insecure version. You should use entropy Leopard version 5.2.9-7 for Leopard/ADDT development.
After you get php installed you need to install MySQL which is easy to find through searching and straight-forward to instal. Then instal phpMyAdmin and you'll be good to go!
As mentioned earlier I can walk you through the steps more thoroughly if you decide to upgrade to Leopard. There's some other steps involved: You need to configure virtual hosts so that it points to your Sites folder on your Mac and each folder in Sites folder are for each site you have so that entering site1 goes to ~/Sites/site1 on local testing server and entering site2 goes to ~/Sites/site2 in local testing server, etc. very, very easy to setup. Just edit hidden hosts file in etc folder and username.config file in apache2 hidden folder.
There's other tutorials out there that show how to do it but most don't have all the info. I'm working on a step-by-step tutorial on my website but it's not finished yet. Maybe it'll be ready by the time you decide to upgrade to Leopard. -
Anyone Solve the FTP Error Message for Firewall??
I have Dreamweaver CC and Mac OS X 10.9.1 Mavericks... Everything is updated, etc. I cannot connect to my server host. The error message I am getting is that my firewall is blocking it but I do not even have my firewall on (terrible I know). I am aware that this is common but I can't find a solution. If someone could point me in that direction, that would be great!
I have been in contact with my hosting company (1and1) and went through all of their trouble shooting issues. I've been pinged back via my IP address, I have everything entered correctly and set up the way it should.
Also if I can't get this up and going does any one recommend an app that works? I was going to try FileZilla but apparently it's full of malware..
Transit 4 looks the best from what I have been reading. Please any one with thoughts on that?
It is frustrating because I expect these programs to work properly and I pay for the most recent ones and they have the same problems release after new release..Thanks, I have tried that.. Tried restarting my OS too, turning on and off the fire wall. I tried changing passwords. And still no connection.
FileZilla from this - http://sourceforge.net/projects/filezilla/?source=pdlp
That was the link on my host page I did not know there was another. I will try that one instead... This is actually the same.. my Mac is saying it's not good for the computer. I can override.
But I would really like to get DW to connect. -
Has anyone solved the privilege error message in iTunes?
Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.
Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847 -
Need help with solving the (basic) programming error
I'm reaaaaaaaaaally new to Java and programming in general. I've been glancing through my older brother's old stuff (he's back at Uni!) and I've taken an interest.
Anyways, so I'm trying to finish this really simple program cause I wanna wow some friends ("wow" = "haha we've done this before a gazillion times") but I can't seem to solve this "incompatible lines" bug in the code, specifically line 24. I've been looking at it for exactly 4 hours!! Programming in Java 1.6.
Thanks for the help!! :)
import java.util.*;
import java.util.Scanner;
public class LuigisPizzaProgram {
public static void main(String args[]) {
System.out.println("Luigi's Pizza");
System.out.println("-------------------------------------------");
System.out.println(" a(SML) b(MED) c(LRG)");
System.out.println("1. Cheese 5.00 7.50 10.00");
System.out.println("2. Pepperoni 5.75 8.63 11.50");
System.out.println("3. Combination 6.50 9.75 13.00");
System.out.println("4. Vegetarian 7.25 10.88 14.50");
System.out.println("5. Meat Lovers 8.00 12.00 16.00");
System.out.println(" ");
System.out.println("What kind of pizza do you want?");
int kind = new Scanner(System.in).nextInt();
System.out.println(kind);
System.out.println("What size of pizza do you want?");
char size = new Scanner(System.in).nextLine();
System.out.println(size);
}Having said that, it is nontraditional to use Scanner like you are using it. There is no way to reuse it in order to get more input. Better would be something like:
System.out.println("What size of pizza do you want?");
Scanner scan = new Scanner(System.in); // create the scan variable
String size = scan.nextLine(); // now use the scan variable
System.out.println(size);Also, when posting your code, please use code tags so that your code will be well-formatted and readable. To do this, place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
[/code]good luck, pete -
Need Help with my School Assignment - Error Message
Hey guys,
I'm doing a school assignment for my Object Oriented Java programing class. Here's the assignment requirements:
"There are five kinds of flowers, and their associated costs. Create an array of strings that holds the names of these flowers. Create another array that holds the cost of each corresponding flower. Your program should read the name of a flower and the quantity desired by a customer. Locate the flower in the name array and use that index to find the cost per stem in the cost array. Compute and print the total cost of the sale. Write your solution in one class: FlowerCounterArray.
The solution should implement the following two methods:
- addOrder(String flowerName, int quantity) to add to the order. This is in addition to reading from the terminal.
- printTotal() to print out the total cost to the terminal."
I wrote up some code so far and I want to test it, but I am getting this error: "']' expected" on the newFlower[0] = new FlowerCounterArrays("petunia", 0.50]; line near the end of the code.
Here's my code:
public class FlowerCounterArrays {
private String flowerName;
private double price;
public void addOrder(String flowerName, int quantity) {
for (FlowerCounterArrays flower : newFlower) {
if (flower.equals(flowerName)) {
total = price * quantity;
System.out.println("The price for " + quantity + " " + flower + "(s) is " + total);
else {
System.out.println("Unfortunately we do not carry that type of flower here.");
public void printTotal() {
System.out.println(total);
FlowerCounterArrays[] newFlower = new FlowerCounterArrays[5];
newFlower[0] = new FlowerCounterArrays("petunia", 0.50];
newFlower[1] = new FlowerCounterArrays("pansy", 0.75);
newFlower[2] = new FlowerCounterArrays("rose", 1.50);
newFlower[3] = new FlowerCounterArrays("violet", 0.50);
newFlower[4] = new FlowerCounterArrays("carnation", 0.80);
}Thanks for the help guys! Much appreciated!
Edited by: he4dhuntr on Oct 14, 2008 1:33 PMOk. I'm kind of new to all this, so some stuff I'm not 100% clear on.
I get what you're saying though. I put the array into the method.
Although now I get a new errod: "cannot find symbol - constructor FlowerCounterArrays(java.lang.String,double)"
I get this error on my newFlower[0] = new FlowerCounterArrays("petunia", 0.50); line
Here's my new code:
public class FlowerCounterArrays {
private String flowerName;
private double price;
public void addOrder(String flowerName, int quantity) {
FlowerCounterArrays[] newFlower = new FlowerCounterArrays[5];
newFlower[0] = new FlowerCounterArrays("petunia", 0.50);
newFlower[1] = new FlowerCounterArrays("pansy", 0.75);
newFlower[2] = new FlowerCounterArrays("rose", 1.50);
newFlower[3] = new FlowerCounterArrays("violet", 0.50);
newFlower[4] = new FlowerCounterArrays("carnation", 0.80);
for (FlowerCounterArrays flower : newFlower) {
if (flower.equals(flowerName)) {
total = price * quantity;
System.out.println("The price for " + quantity + " " + flower + "(s) is " + total);
else {
System.out.println("Unfortunately we do not carry that type of flower here.");
public void printTotal() {
System.out.println(total);
}Thanks for the help so far! -
I need help with a print spooler error message
Out of the blue I lost my printer connection. When I look at my printer menu there is no printer listed. When I try to add or install a printer, I get some odd message about a printer spooler is not running. Restart the machine. I've tried unhooking the printer, rebooting, unhooking from the power source. I even went into some area as an administrator and found the print spool task and when I clicked on the start button there was no action.
This is a MS Windows issue. Try this:
Right click on My Computer
Select Manage
Double click on Services and Application
Double click on Services
Scroll down to Print Spooler and double click on it
Click on Dependencies tab
Check what dependencies the print spooler has, if any you may need to click on + on those dependencies to more dependencies
Go back to the Services list
On each of the spooler dependencies, double click on it
Make sure it is set to Automatic in the Startup Type drop down menu
Now click on Start to start the service
Click OK
Now try and print. -
How do I solve the following error message: MSVCR80.dll is missing. reinstall program
The last iTunes update failed and ever since then I have received the following message:
APSDaemon.exe-System error - MSVCR80.dll is missing. Reinstall program.
I have uninstalled iTunes and reinstalled it but without success. As well, I downloaded the Microsoft Visual C ++ 2005 Service Package MFC Security Update and it still doesn't resolve the issue. What next?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I am having problems loading sampler patches into the exs24 sampler, when i got into edit menu and load multiple samples all the samples r greyed out and i cannot slect them, any help with this would be much appreciated
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
How large is your hard drive and how much hard drive space do you have left?
Maybe you are looking for
-
What is the best way to get rid of duplicates in the XML data?
Hi all, Please help me with the best way to get rid of the duplicates in the XML data. Will a transform with some stylesheet do the trick? I need to read on the stylesheet first, but please tell me if that is possible. I have to deal with XML data th
-
Why can't i access itunes, error messages -50 keeps coming on?
I cannot open itunes on Windows 7, error -50 keeps coming up every time I try to open itunes.
-
Trying to install AUR with yaourt without success. bug?
can anybody have a look at this. trying to install Ardour3-svn from AUR. the package builds, but it fails to install. here the last lines: http://pastebin.com/xWgqnabW
-
Design choice between ArrayList and LinkedList
Can someone clarify me which is better suited (efficient) for use? It appears to me that both can be used very much interchangeably at least from functionality point of view. :(
-
Random disconnections... Without being notified?
I'm experiencing a very frustrating problem. I can never really seem to stay logged on to AIM for very long regardless of the client I'm using. Here's the kicker, though: I'm never notified that I have been logged off, or that I have lost my connecti