I would like to answer the phone with one touch using the speaker button

I would like to answer the phone with one touch using the speaker button?

this is a user helping user forum if you wish to request/advice or complain to apple you will likely have more success using the feedback channel
http://www.apple.com/feedback/iphone.html

Similar Messages

  • Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or ac

    Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
    How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, Ralfar

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • HT203167 I lost my ringtones from my phone when I upgraded to iOS 6 on my iPhone 4.  They are still on my computer, but won't re-transfer back to the phone.  I'm using the correct iTunes account.  How do I get my ringtones back on my phone?

    How do I get my ringtones back on my phone?
    I lost my ringtones from my phone when I upgraded to iOS 6 on my iPhone 4.  The ringtones are still on my computer and play in iTunes, but they won't re-transfer back to the phone.  I'm using the correct iTunes account on both my computer and phone.  In the iPhone view of iTunes on my computer, it shows that my phone recognizes that I had those ringtones, but there is an exclamation mark showing that my phone can't find the files.  I can't delete these "placeholders" from my phone with the hopes of re-transfering the files back to the phone, either.  I cannot just simply re-transfer the files from my computer back to the phone.  It won't let me using the regular synch options and I can't find anything in the menus of iTunes to help me out either.
    Any advice would be much appreciated. 

    Ignore.  I figured it out:)

  • My iphone 4 is in DFU mode.  However I still want the photos on the phone so I cant use the itune recover option.  Does anyone know of a work around

    My iphone 4 is in DFU mode.  However I still want the photos on the phone so I cant use the itune recover option.  Does anyone know of a work around

    actually its not in DFU which is suppose to be a black screen.  When it powers on there is an image of Itunes logo and the usb cord.  What happened is I did an update before I backed up my photos the phone worked great after the update no issues till it powered off.  When I turned it on again it had those two icons and was forcing me to sync with Itunes to system default which will wipe out my media. 
    Have you heard of any data recovery services

  • Hi everyone, to use the portal with many users using the same portal user?

    I have an another question is possible to use the portal with many users using the same portal user with diferent roles in the same time?
    thanks

    Hi Israel,
    It is possible to have same user logged in through differnt terminals or browser windows. However if there are say 10 roles assigned to that user, all 10 will be visible in all the windows. However you may open and work on different roles.. in the different windows.
    Note that the real time collaboration features shall not be available if the same user logs in multiple times.
    Hope this is useful.
    Regards,
    Anagha

  • How to delete the members in one dimension use the maxl script

    i have question that i want to delete the members in one dimension useing the maxl script, but i do not know how to do it. can the maxl delete the members in one dimension? if can, please provide an sample script, thank you so mcuh.

    MaxL does not have commands to alter an outline directly, except the reset command which can delete all dimensions but not members selectively. The best you could do would be to run a rules file (import dimensions) using a file that contains the members you want to keepload rule for the dimension. As typical the warning is to test this first before you do it on a production database

  • Music vanishes all the time from iPod touch using the iTunes App...

    Hi
    I am often not near a computer and prefer to purchase music for my iPod Touch from the iTunes app on the Touch itself. This has worked fine for many months. I believe my iPod is a 3rd gen. However lately I suddently noticed that some music purchased recently was completely missing from the iPod, even some songs purchased as part of an album just vanished... the rest of the album songs were still there, but a couple of random ones had just gone.
    Now, every time I try and purchase and download something from the iTunes App (I literally just tried it again) it just doesn't appear in the purchased playlist.. or anywhere on my iPod in fact.
    Essentially, I've wasted my money on buying songs that just don't appear. I've also noticed that the music search chugs a lot these days, as if there's some sort of background problem.
    I recently upgraded the software (with multitasking etc) but the problem hasn't been fixed.
    This is a really frustrating issue, and I have purchased several songs twice and got nothing! So really keen to see if anyone has seen it before and if they can please help me?
    I've tried deleting apps, restarting the iPod... when I try and sync with the PC, the purchases are nowhere to be seen. It's all a bit disappointing really!
    I'm on a 64Gig iPod touch and have 41 Gig showing as available!
    Please help, I've searched for hours and got nothing on this specific issue.
    Thanks

    hmmm nobody can help me? Is this because nobody wants to tell me I've wasted my money?

  • HT4623 I want tobuyiphone5 but need to know if the contract begins on delivery of the phone with chosen network oron the day do order

    I want to buy iPhone 5 but with anew network provider.  I want to know if the network gets changed after the day of delivery of the phone or on the day of placing an order?

    I want to buy iPhone 5 but with anew network provider.  I want to know if the network gets changed after the day of delivery of the phone or on the day of placing an order?

  • I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

    how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

    Forgotten Passcode or device disabled after entering wrong passcode
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • Can anyone guide me how to create the databse with or without using the GUI

    I need to create the Database from SQL prompt can any body tell me the links where i can find some sample scripts to do that....Thanks

    Hi,
    I would like to mention few stuffs too..
    for manually.
    1. startup nomount pfile=path of the pfile.
    2. run the create datbase script.
    3. run catalog.sql, catproc.sql script.
    that was the brief idea,but you need to create your sample pfile,setting up your dir locations,setting envrmnts variables.
    for gui envrmnts you have DBCA , use it and forget about all the cavtes.
    thanks
    Alok.

  • I had to perform a master reset on my HTC one, before doing so the phone was backed up using the backup assistant app. Now there is no restore button I can find to get my contacts back. How do I restore my contacts?

    I had to perform a Master Reset on my HTC One while trying to work through an issue. This was done with a Verizon rep on the phone and we performed a backup using backup assistant. Now I am not able to restore my contacts because I do not have a "restore" soft button when I open the backup assistant app. How do I restore my contacts?

    Have you updated the dreaded Backup Assistant program?  I think you need to do this first before you can restore.
    http://www.windowsphone.com/en-us/store/app/backup-assistant-plus/37643125-d0d8-4727-8e2d-1a18476d65c6
    If you are using a Microsoft Account for HTC restore your stuff and get off the Backup Assistant and use Windows Phone's native backup, Learn about Windows Phone backup | Windows Phone How-to (United States) and you'll never have to go through this again

  • Posting the GR with FM mb_create_goods_movement use the T-code MIGO

    Can any one suggest me It is possible Post the GR with help of FM mb_create_goods_movement with Transaction MIGO .
    The reason for MIGO i want to Post GR with Handling unit .
    I try to post the GR with FM It always export some value in EMKPF-mblnr field and sy-subrc eq 1.
    NO which is available on the MBLNR is not available in database.
    Please give the solution.

    Hi Rajeev,
    Can you please give me the sample code for the same??
    Regards,
    Sankar

  • Does using the iPad with hard touches to the screen cause any damage to the touch detector?

    I have noticed some people using the touch interface of the iPad by touching the screen hard (the touch makes a sound). Does it cause any damage?

    But 'hitting' the screen hard with the finger, does it hurt the touch screen?

  • HT1212 My iphone5 has been disabled for 22 million minutes as the password was entered wrong too many times. I have forgotten my password and when i go onto itunes it says i need the password even to restore the phone. even when i use the hold button

    how do i disable the phone if its not letting me restore it any way without the passcode and i dont remeber it

    Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • The misery of one developer using the ActiveX Bridge

    Hi,
    I'm not sure that anyone will know how to solve my problems, but I can at least complain.
    In our firm we have used the ActiveXBridge to wrap an OrbixWeb (CORBA) client. All was written in VB Java 1.3. Please don't discuss these choices it is not the point and not my choices anyway..
    Now We are migrating to 1.5. And here are the problems I have encountered:
    1. The architecture has changed. Now there are Dll instead of TLD that are generated.
    2. It is not possible to change the name of the ActiveX when generating.
    3. The JRE that is used is always the public JRE!!!.
    4. The security restriction blocks the reading of system properties or files, which was done by the former dll.
    5. The solution found was to sign the jar.
    6. ORB dynamic instantiation does not work well with the class loader used by the plugin. Even if the actual implementation of the ORB is deployed, the JRE complains that the class is not available.
    7. The solution was -> install the orbixWeb jar in the ext folder :-(
    8. Unfortunately even with this and a java.policy that indicates that all the jar in the ext folder are given all permission, the instantiation does not work : System.getProperties is not allowed (even if this jar is signed)..
    9. Solution was to add the global permission to read/write properties :--(
    10. ORB are good at connecting to other servers.. then this also was not allowed
    11. Solution was to remove all global security setting (sigh)
    12. The program was still not working.. because I was using the java.security.debug options and this interfered with the logs of the javaBean.
    If someone has good ideas on how to avoid the solutions used in point
    3. 7. 11.
    3 <- Bug (or feature of the bridge?)
    7. <- Misunderstanding on how the security works by me, or how to change the class loader for the activeX
    11 <- security misunderstanding? bug?
    Anyway the bridge was weak, and 1.5 made it worse.

    Hi,
    As far as I understand your requirement, you want to pass the result of one query to another query as a filter.
    Well you can do this, by Using Replacement Path Variable.
    For e.g. you want to pass Values of Custmomer Account Number to another query. In the second query, create one variable on Customer Account Number with type Replacment Path. Here it will ask you to enter the name of the query from which you would like to take the values of Customer Account Number.
    When you will run the second query , it will execute the first query from which you want to read the customer accoutn number in the back-end. And it willl display the output the second query as per the valeus of customer account number.
    This will help.
    - Jaimin

Maybe you are looking for