I would like to capture digital video from a camcorder on my HP Envy23.

I used a firewire cable on my old desktop, but this all-in-one computer doesn't have a firewire port. Does anyone know what I can used with a digital camcorder with a DV port for a digital transfer? Can I use the USB 3.0 port?

Hi,
The USB 3.0 ports are not reliable, USB 2.0 ports are much better. Please check the following link. I actually used one USB-Firewire adapter for my Canon MX250 video cam. I've got new video cam now, just before Christmas when I needed a new video cam to record my newly born grand son.
http://www.wisegeek.com/what-is-a-firewire-to-usb-adapter.htm
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I would like to download a video from youtube in firefox. Also, I can't find the Firefox button others are referring to in the top left corner. (Windows XP)

I found a video on downloading a video from Youtube without downloading additional software. It looks straightforward enough. Problem is, the top bar of my screen does not have the Firefox button that others refer to. Other than that, Firefox has made for a great browsing experience.

Not really.<br />
The current Firefox release is Firefox 27.0.
You can find the full version of the current Firefox 27.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
You get the orange Firefox menu button when the Menu bar is hidden.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the hidden Menu bar)
*Right-click empty toolbar area
See also:
*https://support.mozilla.org/kb/how-do-i-get-firefox-button
*https://support.mozilla.org/kb/Menu+bar+is+missing

Capturing the Video from JVC Camcorder

I was recently advised to purchase Adobe Premier Elements 7 and a new computer with a Windows Vista operating system. The camcorder and computer have plug in ports for firewire. However, the capture mode only seems to copy the video at the same rate that it plays the movie. In addition, it doesn't seem to transfer any audio. Any suggestions?

That's called real-time capture, Randy. It's how it's supposed to work! ;)
As for your ASIO settings, only you can tell if they're correct or not. They look right to me, but they should match your system's audio settings. For instance, you want to make sure that your ASIO settings in Premiere Elements are going out to the jack your speakers are plugged into -- otherwise... well, you know.
BTW, you may want to check the video you've already captured. Open a clip in Windows Media Player or Windows MovieMaker. If the captured video plays audio there, you'll know it's an audio hardware setting in Premiere Elements. If not, you'll know there's a problem with the captured video itself -- maybe an audio setting in your camcorder, for instance.
And make sure you've got the latest version of Quicktime and the latest RealTek drivers!
http://www.adobeforums.com/webx/.3c057647/2

HT4436 I have a laptop Mac and an IPad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the IPad, how can I set up the iCloud in both devises to do so?

I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?

Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box.

I would like to create instructional videos on 'how to' for iPad.

Hi,
I would like to create instructional videos for teachers on how to do various tasks on the iPad.
At the moment I have an iPad and a PC.
I have tired an App called 'DispRecorder' to get the capture from the iPad, but I am unable to find an app to add arrows as highlights. Any suggestions?
Am I going about this the wrong way? Is there are better way? Or are they apps that I cannot find.
Thanks in advance for your help. It is greatly appreciated.
Hopefully I will be able to create instructional videos soon.
Thanks
Brendon

With the wireless card in your Mac you can set up a network to which the iPhone can connect: obviously your Mac would have to be on for this to work. Or you could buy a wireless router such as the Airport Extreme, which might not be much more expensive, and use that to connect the iPhone. You could use an Airport Express, but you would need to already have a router so that there was a spare ethernet socket for it.
This was the best reference I could find for setting up a network from your computer:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8339.html
However note that it apparently only supports WEP encryption, which is far from secure, not WPA which is what you should be using.
Another factor is that if this is a Mac Pro, you may have problems installing the card. As I remember some models can be fitted with a card if ordered with it initially, but retro-fitting is difficult and really needs to be done by an engineer. Given all this I would suggest investigating the Airport Express, bearing in mind the issue of needing a router if you don't have one built into your modem.

Unable to properly capture HD video from miniDV tape in FCE

unable to capture HD video from miniDV tape
When I connect my Sony HDR-HC3 miniDV HDV camcorder to my iMac via firewire cable and use Final Cut Express to capture the video from the tape, I do not get a Capture window that allows me to specify in and out points, I just get a playback window that immediately starts capturing and the only option I have in this window is hit ESC to stop capturing. If I let this capture window continue to capture the video from the camera with miniDV HD tape, then the entire tape would be captured as one massive single video clip.
QUESTION: Is there something I change or do to make the proper capture window appear where I can specify in and out points to capture from tape for each clip?
NOTE: using same camera and tape with iMovie with automatic capture enabled, all the clips get captured properly. I also tried to use the manual setting in iMovie and it worked too.
More details(read only if you want more information)
I have a several miniDV tapes containing HD video created on a Sony Sony HDR-HC5 and Sony HDR-HC7. Unfortunately, both these camera were stolen, and I have since moved to a camera that uses flash memory, not tape. However, I need to get the video footage off these tapes, so I bought a used Sony HDR-HC3, it plays the HD miniDV tapes just fine and iMovie reads the video from this camera just fine, but Final Cut Express does not.
When I setup Final Cut Express, I used the Easy Setup and specified:
Format: HD
Rate: 29.97 fps
Use: HDV-Apple Intermediate Codec 1080i60
These setting match those of the camera and recorded tape. If I use any other settings but these, then Final Cut Express never sees the camera and never opens any capture window at all. Using Quicktime 10 movie inspector on the clips captured by iMovie from same camera, all the clips match this setting too.
Final Cut Express version 4.0.1
iMovie 09 Version 8.0.2 (821)
iMac 2.93 GHz Intel Core 2 Duo with 4GB 1067 MHz DDR3 running
Mac OS X Version 10.6.4
My Final Cut Express scratch disk is a Seagate 2TB external USB 2.0 Hard Drive that has been formatted to be Mac OS Extended (Journaled). This external disk is also where iMovie successfully captured all the video from the same camera.

Thanks for the answer. It makes me sad. I thought using Final Cut Express would be an upgrade to a more robust editing system from iMovie, yet iMovie does a superior job of logging and capturing video from HDV video on miniDV tape in comparison to FCE. Not only does iMovie capture each clip on the tape into it's own video file automatically, it also includes timestamp information in the filename indicating when the clip was originally recorded, which appears to be something that is missing from Final Cut Express. Now I realize that HDV miniDV cameras had a relatively short life span in the consumer marketplace and have since all been replaced by flash and hard drive based AVCHD cameras, but from circa 2004 to 2007, miniDV HDV camcorders were very popular and I am sure there are lots of consumers that must be super frustrated by Final Cut Express limited ability to log and capture clips properly from these cameras.
Assuming I do not want to make a rough cut of video in iMovie and prefer to begin my editing project in Final Cut Express (not doing XML export of iMovie project), I need to determine the best way to get clips captured via iMovie into Final Cut Express and determine if there is anything inferior in the iMovie captured clips that I need to be aware of. So far it appears that both iMovie and Final Cut Express reduce the 5.1 surround sound captured on the HDV miniDV tapes to stereo sound, which is not a big lose given the 5.1 sound was recorded from camera's built-in microphone, but it makes me wonder if the video is reduced in any way by the iMovie import process, examining the video in quicktime's inspector window the video appears to be the same in both iMovie and FCE, but I'll research the answers to these questions elsewhere on this forum and post additional questions if I do not find the information I need.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
Your only options are to use something like ScreenRecycler mentioned above.
~Lyssa

Can I capture the video from the TV card or video capture card to publish

Can I capture the video from the TV card or video capture card to publish?
I tried to use the USB camera, it's OK. But, will the TV card or video capture card also work?

Hi,
iChat will set up a Video chat window that takes in to account your Processor speed and Internet Speed and to some extent the Buddy's speed.
This then denotes the pixel content of each frame.
OS X 10.6.x tells me this is iChat 5 which in turn mean you have at least an Intel Core 2 Duo Processor.
This should be capable of 30 frames a sec at about 640 X 480 pixels (Check the Connection Doctor (Video Menu) and the Statistics tab during a Chat).
iChat 5 cannot do HD (Max of 4:3 ratio at the above figures)
After that it depends how you are recording the chat.
Quicktime X would do it.
iChat will do it itself (if the Buddy agrees)
10:14 PM Wednesday; February 1, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I would like to restore my Iphone from itunes will I lose my app data????

I would like to restore my Iphone from itunes will I lose my app data for example I have Itimesheet and lockpro with all data and passwords and work hours saved if I restore does all that come back as well, emails text messages contacts songs videos etc.
The question is what does restore actually restore????? from back up????
Thanks lease help
worge

your apps will defo be there. email settings im not too sure because i dont use it sorry but it should back it all up

I would like to use a video my grandson posted on FaceBook in my iMovie. I saved it to my desktop, but it will not drop into iPhoto. The format is video.php.html.

I am using a MacBook Pro OK X Version 10.9.5. Processor 2.8 GHz Intel Core 2 Duo
Memory 4GB 1067nMHz DDR3
iPhoto Version 8.1..2
My grandson posted a video on FaceBook that I would like to use in my Christmas Memories movie. He use a Kindle Fire HD. I downloaded it to my desktop (video.php.html), but I cannot save it to iPhoto. What should I do? Thanks.

Miriam Griggs wrote:
…a video on FaceBook that I would like to use in …video.php.html...
what you downloaded is no video (just some link to an 'internal website hosting the video'...
it's a bit tricky, to pry a video from FB's dead cold hands...:
click on the video for playback in your web-browser. (no need to run the full video)
replace the "https://www.facebook.com/…"
by "m.facebook.com/…"
the same site appears in a diff. 'look'…
right-click/ctrl-click on video, select 'download to'.......

HT1535 I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes. Can that be done? I turned off automatic syncing so I can charge up the ipod.

I would like to move my songs from my ipod nano back on to my freshly reinstalled windows and iTunes. Can that be done? I turned off automatic syncing so I can charge up the ipod. Help!

You won't be able to, just by navigating out the iPod's photos folder in iTunes. You'll likely need the help of some sort of third party software to get the job done for you. One thing you'll want to keep in mind about these photos is that they are no longer in their full resolution, but instead are scaled down thumbnail versions that were optimized for viewing on your iPod's Video smaller 2.5" LCD display.
Here is one such product.
http://www.macroplant.com/phonetopc/
Google for more.
B-rock

I would like to capture all the SQL and PL/SQL   with full syntax that is

Hi
I would like to capture all the SQL and PL/SQL with full syntax in a sequence that is being executed in the last 30 or 40 min for a particular session in sqlplus.
Enabling SQL trace is not an option.
Will appreciate your input.
thanks
KS
Edited by: user12710695 on May 22, 2010 11:08 PM

Welcome to the Forum.
Most important information (especially for such queries) is Oracle Version.
Is AUDITING an option?
Flashback can provide UNDO SQL.
For SQL there are many options...
1. LOGminer
sudhakar@ORCL>desc dba_hist_sqltext;
Name                                                  Null?    Type
DBID                                                  NOT NULL NUMBER
SQL_ID                                                NOT NULL VARCHAR2(13)
SQL_TEXT                                                       CLOB
COMMAND_TYPE                                                   NUMBER2. SELECT SQL_TEXT FROM DBA_HIST_SQLTEXT WHERE SQL_ID IN (SELECT SQL_ID FROM V$ACTIVE_SESSION_HISTORY WHERE USER_ID = ???)
vr,
Sudhakar B.
Edited by: Sudhakar_B on May 23, 2010 8:35 AM

I would like to have a video splash page on my website along with a video uploader.

I would like to have a video splash page on my website along with a video uploader. Can this be done in BC? I don't even see video uploader templates for sale? Help anyone.

I am not sure what you mean by "Muse Side" Or BC.
People who have only Muse experience with the web, sorry its hard to follow what you mean sometimes so bare with people like me.
BC - This is the CMS (Content management system) and hosting platform to develop websites on. Muse is a very basic graphical based interface to build websites. This is NOT the only thing you use to build websites on and use with BC. I use Coda2 for example (We design and then code sites ourselves to offer rich, feature and web standard, well optimised etc websites).
Because embeded videos are html, flash etc depending on what you choose then you can.
Auto play is a bad idea, its a bad user experience. Why? Say you just had a gaming session or listed to music, you now have that stopped and your now browsing the web. All of a sudden you load a site that starts playing sound in your ears - This is a big shock and its a very well known pet hate of web users. It puts them off your site instantly.
In saying that you can have a video autoplay from youtube if you just enable the option when you embed it, so does vimeo. That is at the basic levelt.
If you want to have a modal pop up on your home page you will need to code it to do so when you load the home page using javascript. In that you can have the video and set that to autoplay. The one thing you will need to do is also code cookie support in javascript as well. You will want to do this when the user closes the browser because as soon as they do so they do not want to see it again if they reload or go back to the home page. Your cookie will be checked every time the homepage loads and if it is there - dont play the video, if it is not then play the video popup.

HT201263 I would like retrieve all my data from my IPhone 4S after I lost all my data! Please help! ? Thank You.

I would like retrieve all my data from my IPhone 4S after I lost all my data due constant Apple logo on! After I restored this phone I lost all my contacts, text messages, pictures, videos..!!! The question I have is if I never backed up to iCloud and iTunes is there any way I can retrieve all my data that was before restoring this iPhone 4S. Please help! ? I greatly appreciated !!!

If you never synced your phone to your computer and your contacts were not synced to iCloud or another cloud-based service, everything is gone. You will have to start fro scratch.
~Lyssa

I would like to capture digital video from a camcorder on my HP Envy23.

Similar Messages

Maybe you are looking for