I would like to change the font size (make it larger) in the Finder SIDEBAR
I would like to change the font size (make it larger) in the Finder SIDEBAR in Leopard.
Welcome to Apple Discussions.
vincentd wrote:
I could also use a larger font in the Finder side bar. Sceen resolutions increase and systems fonts get accordingly smaller...
Well, if you normally use the lowest resolution, then yes.
vincentd wrote:
Also it CAN be done in iMovie 08, why isn't it possible with other Apple apps?
I can't answer that question. We don't work for Apple here, we're all just plain users who contribute our time, but you can send Mac OS X Feedback
-mj
Message was edited by: macjack
Similar Messages
-
How do I increase the font size of a large document?
Whenever I try to increase the font size of a large document, the text boxes cross their boundaries and mix with each other, or partly disappear at the end of every page. Do I really have to adjunst every text bos in the document or is there a faster way? Im having this issue with adobe acrobat 11 pro
This is not a feasible thing to do. Editing a PDF is a desperate last resort for so many reasons.
Whatever you need to solve, you are unlikely to solve it in Acrobat. Probably best to export text and remake it. -
I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.' Where exactly is it located? Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US
You have to choose – one settigf or another.
The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
Good luck.
Russ -
Change the Font (size etc..) on the Right-Window(Text)
Hallo Experts,
I have following problem with JavaHelp 1.1:
It is possible to change the Font (Menu/Options/Set Font...), but
it effects only the left-Window(TOC).
I want to change the Font (size etc..) on the Right-Window (Text) - because
JavaHelp shows the Font Arial/10/Plan not in the real size - it seems - is not greater then Arial 7 or 8.
Who can give me a tip - Thanks a lot
Charanjeet S. Gill
Thanking you in AdvanceWell, I haven't tried it, but seeing as the text on the right hand side is just HTML pages, I guess yu can just write your HTML using <font>, <size>, <color>, etc. tags. Let me know if it works
-
I rebooted my Iphone 5S, when I pressed the home button to enter my pass code the resolution must have been reset. The font size is so large I can not enter my pass code. How can I resolve this issue?
Triple click Home.
After you get into the iPhone, Settings > General > Acessibility and set Zoom to Off. -
I would like to change my apple id to a different email because the one i am currently using I dont use as my email address anymore but we I tried to change it in manage apple ID it said I already have that email address as one of my accounts but I never created and apple ID with that email address. how do I go about this
The following article may help you:
http://www.ehow.com/how_8362857_rename-mailbox-apple-mail.html -
Can we change the font size of (none) style in RH8?
In RH8 when you add bullets, numbers or a new row to an existing table the style immediately to (none). And (none) is 12pt. Our "Normal" is a 10pt....and the font size does NOT show in the editor for (none)...only in Preview or compiled webhelp. So many people are missing that they have a (none) applied somewhere in the topic until its in Production.
I can't find (none) in the stylesheets and it doesn't allow me to select and edit it.
Is there a way to change the (none) size font to Arial 10pt? The Arial seems to hold from Normal to (none) but the 12pt is killing us.
It would be nice if it would keep the Normal that was origionally applied...but if I can force 10pt life would be much, much simpler. ??
THANK YOU for your creative answers!!!Hi Teri.
You certainly can change the "None" style but I think it is not good to leave text in topics with no style assigned to it. When assigning things like bullets using the formatting toolbar icon it applies a "None" style forcing you to select a style (e.g. Normal). See here for further details (look in the RH8 section).
If you want to change the "None" style, expand the "Other" styles section of your CSS file. In there is a "Background + Text [Body]" style that can be changed. It is this style that is used by the "None" style.
The RoboColum(n)
@robocolumn
Colum McAndrew -
Change the font size in the ABAP report
Dear all,
Does anybody know how to change the font size in abap report.
Regards,
LukeHi,
Font size in ABA reports can be changed using PRINT-CONTROL COMMANDS. Here i provide you the code and description of using print commands to change the font size.
Be aware that the PRINT-CONTROL is not supported in SAP Enterprise 4.7
For your information, SAP cannot provide any support to error caused by print control command
(see SAP OSS notes 66478).
* Parameters for function below should be taken from your printer
* configuration in SAP - check SPAD transaction -
* standard print control
* print-control position 1 function: 'CI006', 'SF015'.
* Submitted by : SAP Basis, ABAP Programming and Other IMG Stuff
* http://www.sap-img.com
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
* Start of print-control
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
SKIP.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
SKIP.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
* Depending on your SAP printer device, this may also work
PRINT-CONTROL FONT 1 LPI 6.
* you can try to change font and LPI numbers
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
* End of print-control
NEW-PAGE PRINT OFF.
*--- End of Program
Hope this solves your problem.
Thank you,
Pavan. -
Can not change the font size in a new text into the smartforms
Hi!!
I have a Footer window into my smartform and I've created a new text into this one
text type: Text element
nothing extrange.
I copied and paste a text from a word document and after that I want to change the font size to 8 and font style to Arial, but after saving the font size and styles goes back the 10 and Currier New.
Any idea?
I also tried typing the hole parragraph and I get the same issue!...
Thanks.Hi
First Reset paragraph and Character and then set the new fontfor the same.
dont copy the same into word and back form
also goto change editotr and check the style used for the same.
Regards
Shiva -
IBook App shuts down when trying to change the font size
Hope sb can help
when I open a book/pdf, the font size is very large. When I try to make them smaller (menu), the iBook App just shuts down.
I tried a hard reset of the iPad ... still the same problem. Did sb experience the same problem? Tx!This happens only because ios 6.It has bugs.You try to restore and if it did not work just try to downgrade it to ios 5.1.1
-
Change application font size in Thunderbird 3.
How can I change the font size in Thunderbird 3? The bold fonts are to bold and the general font size is to big I think.
I have tested with creating a chrome folder in the default profile. The userChrome.css looks like this. But it didn't work.
* Edit this file and copy it as userChrome.css into your
* profile-directory/chrome/
* This file can be used to customize the look of Mozilla's user interface
* You should consider using !important on rules which you want to
* override default settings.
* Do not remove the @namespace line -- it's required for correct functioning
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* set default namespace to XUL */
* Some possible accessibility enhancements:
* Make all the default font sizes 20 pt:
* font-size: 20pt !important
/* Global UI font */
font-size: 6pt !important;
EDIT: Seems like the bold font is a more global problem. This is from Firefox
I have installed the ubuntu patched fonts. My ~/.fonts.conf looks like this.
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
<match target="font" >
<test compare="more" name="weight">
<const>medium</const>
</test>
<edit mode="assign" name="autohint">
<bool>true</bool>
</edit>
</match>
<match target="font">
<test name="weight" compare="more">
<const>medium</const>
</test>
<edit name="autohint" mode="assign">
<bool>false</bool>
</edit>
</match>
</fontconfig>
Last edited by orjanp (2009-12-17 09:52:12)Yes of course. My bad.
Here it is. Some of the entries don't have a corresponding entry in conf.avail. I accidentally deleted 10-autohint.conf from conf.avail when I meant to delete it in conf.d. Ho do I get it back?
Have tested lxappearance to change the font in GTK applications. Works, but the boldness is not looking very good yet.
[root@ArchT400 orjanp]# ls /etc/fonts/conf.d/
10-antialias.conf 45-latin.conf
10-autohint.conf 49-sansserif.conf
10-hinting.conf 50-user.conf
10-hinting-slight.conf 51-local.conf
10-lcd-filter.conf 53-monospace-lcd-filter.conf
11-lcd-filter-lcddefault.conf 60-latin.conf
20-fix-globaladvance.conf 64-ttf-arphic-uming.conf
20-unhint-small-vera.conf 64-ttf-thai-tlwg.conf
25-ttf-arphic-uming-render.conf 65-fonts-persian.conf
29-replace-bitmap-fonts.conf 65-nonlatin.conf
30-cjk-aliases.conf 69-unifont.conf
30-defoma.conf 80-delicious.conf
30-metric-aliases.conf 90-synthetic.conf
30-urw-aliases.conf 90-ttf-arphic-uming-embolden.conf
35-ttf-arphic-uming-aliases.conf 90-ttf-thai-tlwg-synthetic.conf
40-nonlatin.conf README
41-ttf-arphic-uming.conf -
The most recent update changed all font sizes (smaller). What is the best method to enlarge?
yeah, that's what I ended up doing late last night because the white font against pale gray background was driving me nuts. I hadnt changed anything. been using the same theme for about 4 months but then all of a sudden, like I said, the font color mysteriously changed.
anyway, thanks for your help. -
I successfully created a form filled pdf using an existing pdf document. However, the font size is too large to allow end user to type in information in the form box. Is there a way to 1)globally set all of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?
Hi DenisonDoc,
There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
- End users cant change size and type of font. It is up to designer.
Regards,
Ajlan Huda. -
The font size in web page composer 7.3
Hello,My corporate is using SAP NetWeaver Portal 7.3 now.
I want to use Web Page Composer 7.3 to build a firstpage for my company,but I find a strange problem.
When I create a web form,for example Link List or Paragraph,after I preview ,the disalpy font size is very big.
but I remember in the release 7.0 the font size is very proper.
I find the types configures ( km > etc > wpceditor > types) is the same in both release7.0 and 7.3
Now I don't konw what to do ,anyone can help me ?
Thanks a lot!
Best regards!
lexian.Hi,
now we have the tinyMCE editor, where you can insert and edit html-code. It works fine now for the layout,
but there are still a few problems with the links..
In the edit mode there are displayed all km images out of the km. But the images aren't displayed under the portal role, when i publish the page. And all the links like one to a wiki or the TBN links doesn't work, too.
Can anybody help me further?
Thanks in advance,
Lydia -
Change link font size through theme editor
Is it possible to change font size of link element using theme editor? I can't find corresponding parameter. Is it inherited from somewhere else?
Thanks in advance.Nadezhada,
If you want to change any font size of the text on Top level Navigation (top level tabs) or MasterHead(Masthead) then you can use theme editor.
But it wont work application level. For example if you want change the font size of a text in the a iView or any application, then you should look the possibility of changing that corresponding application.
Ram
Maybe you are looking for
-
How do I create lists in reminders on my iPad?
?
-
Unable to add a special character in the rskc
Hi I want to add the degree symbol like how it will come when we will write : 36degree [that small circle]. Please suggest how to add i am trying by coping that from a word file but failed. Regards Vismark
-
How do I get the address bar to show the url of the site that I'm on?
In the old version of firefox, the address bar would show the url of the site I was on. When I would change tabs, the address bar would change to reflect the url of the tab. In the new version, the url of the current site will not show unless I hit t
-
Problem with Time Capsule Wireless Network...
I have Time Capsule over a year and it worked fine with Xfinity Modem. Recently, Xfinity had upgraded modems to Wireless router and I have ARRIS TG862 from them. I was able to set up wireless network using bridge mode on my Time Capsule and it all wo
-
Can't create table that grows using the button object
Im a beginner, and this seems like a simple issue. Appreciate your help in advance. When I try to do this, the button fails to add a row. So, I printed out the Help section entitled, "create a table that grows using the button object" and started fr