I would like to connect the electric violin to ipad4 as electric Guitar.
I would like to connect the electric violin to ipad4 as electric guitar. What should I do? I have Flanger FC-20, it's doesn't work.
Some external devices can be connected via Apple's camera connection kit.
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom
Similar Messages
-
Good afternoon,
I have a set of 5 speakers and 1 subwoofer 5.1 from Altec Lansing and I would like to connect the 3 exit cables - 1 black + 1 green + 1 yellow - to my new i-mac 22" - acquired last week - equipped with only 4 USB 3.0 + 2 Thunderbolt + 1 Ethernet + 1 jack for micro or speaker.
What connector type do I need? And where can I connect ot?
Many thanks in advance for your help
Best regards
Pascal QuennessonSorry you cannot
That speaker system is for sound cards on PC's which separate the channels, the Mac's don't seperate the channels or decode surround sound formats and only pass the 5.1 through the dual analog/optical stereo mini port.
You might find a external device that accepts Toslink optical inputs and then separates the channels and sends the appropriate signal to the powered speakers. -
I have a virgin Superhub which serves my wireless needs throughout the house. I have a Timecapsule which connects wirelessly to the router with no issues. I can backup my MBP over wireless easily. I have now got another machine in a different part of the house that I would like to connect to the network. It doesn't have wireless so ethernet is the only option. I have a number of options 1) run cabling - not really possible 2) buy a powerline network system or 3) use the timecapsule to connect to the network/internet.
I like option 3 because
(a) - I don't have to spend any more money and
(b) - my wife wont complain about cables also see (a)
Should using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
ThanksShould using mixed wifi and ethernet clients on a timecapsule work? if so is it a feature I can use out of the box so to speak?
Thanks
No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.) -
I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks
Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception. If that is the case then I am happy as a Pig in Mud
I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
Many Thanks
Nick -
I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?
The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter. -
I have 2 iPhones - one for personal use and one for work. They are currently connected with the same Apple ID. I would like to separate the two accounts. Does anybody know how to do this?
Just create a new AppleID for your work.
As Allan suggested, items purchased on one iTunes account cannot be moved to the other account.
However, you can put items purchased on on account onto the other iPhone. -
I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer. How do I resolve that so I can literally connect it to my new computer and transfer all my music? Any help is much appreciated.
I would like to transfer the music that is already on my iPod touch to a new computer. At present, my iPod touch is not recognised on the new computer.
It doesn't quite work that way. Transfer your music from the old computer to the new one. Then, sync the iPod.
iTunes: How to move your music from one computer to another:
http://support.apple.com/kb/HT4527 -
I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy
According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped. -
I have a Macbook Pro (late 2012) and I would like to connect it to 2 screens simultaneously (1 screen is a TV and can only take HDMI, the other is a larger computer screen and has both VGA and HDMI connections). How can I do this?
The article you cited refers to The Mac Pro, a 50lb silver tower -- not a notebook computer.
Everymac.com says:
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2*)
Details:
*This model supports a simultaneous maximum resolution up to 2560x1600 on two external displays via Thunderbolt. Alternately, it can support a single display up to 2560x1600 via Thunderbolt and a single display up to 1920x1200 via HDMI. Although it can theoretically power all three external displays, as confirmed by a helpful reader, it runs too hot with three displays connected.
Also see: How many external displays can the Retina Display MacBook Pro models support? What is the maximum supported resolution of each? Are adapters required?
When using other than ThunderBolt displays, the ThunderBolt port is directly compatible with Mini DisplayPort, and can be forced into compatibility (with Single-Link DVI or HDMI up to 1920 wide) with a simple adapter.
To adapt to wider displays, an ACTIVE Dual-Link adapter is needed, about US$100. -
I would like to connect my old TC to my new TC in order to access the older files
I would like to connect my old 2TB TC to the new 3TB TC in order to access the old files.
Plug old TC into new TC by ethernet.. reset it to factory and then do the setup again.. as bridged device. No files are lost from the hard disk doing this.
Whether Yosemite can find it is another question.. Yosemite is like the guy with two brains.. one lost and the other looking for it.. it has terrible network bugs.
Only way to find out if you are affected is give it a go.
Good luck.
Post back when you hit issues. -
I would like to format the external hard disk. I need to use it in Mac as well as in Windows. What format should I do, connect to Macbook Pro? MS-DOS (FAT) or ExFAT ?
success1975 wrote:
Thanks
1) In 'ExFAT' format, is there a limitation on the file size?
Not one that will matter.
2) Is 'MAC OS Extended' format, only for MAC computers?
Yes, only for Mac
3) What are those (a) journaled (b) Encrypted & (c) Case-sensitive? or when to use those?
Again, only for Mac. -
I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible? If so, where can I buy such a rooter? Many thanks! Ina
I'm not really understanding what you want. You mention all 3 types of connections: wireless, 3G and bluetooth, but I'm not clear on what you want to do. What the router is supposed to do, and why do you think it would need to connect via bluetooth?
I'm thinking you want to buy a Mifi type device that will allow you to connect to a cellular network and then connect the iPad to that device via the Wifi network the Mifi produces.
Is that so? -
Why does my airport utility always ask me to connect an ethernet cable when I would like to use the extended network option?
Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device. -
Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!
What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.
-
I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?
Perhaps this web page will help: http://support.apple.com/kb/ht1229
But I must point out that leaving the iPhoto Library on the external is worth considering. Your internal drive would be better off without having to carry the photos.
When you booted with the external connected and you were asked for the library, did you try navigating to the Library in on the external drive?
Maybe you are looking for
-
Iphone 6 icloud photo sharing not working
Today I got an iphone 6, did all the updates, and tried to use the icloud photo sharing. I can create a stream, add photos, and invite people to view; however, when other people accept the invitation nothing shows up except "No Items" despite me sha
-
How can I get 2 Mono Audio Channels in, 2 Identical Mono Channels Out?
I use Premiere CS6. Most of my work requires simply editing with one audio track used for the on-camera talent's microphone, adding another track for music, and then outputting BOTH of those tracks to the right channel as a mixed mono output AND the
-
Interactive list report with screns
hi! all I have an Executable report which has a screen as an input screen not selection-screen, and a classical list display as its output for the entered data. in that output display i have an hotspot column which acts as a base for the se
-
Oracle client for siebel server configuration
Hi , To install siebel as prerequisite we are installing oracle client on the siebel server machine. Our client is providing ldap.ora instead of tnsnames.ora file. Through out my earlier projects we used to have tnsnames.ora entry which is having con
-
How can I set a parameter action to form. I want to have html code: <form name="test" action="testaction.jsp?sth=2" method="post"> ....but I can't give action parameter to <h:form action .. . I'm getting this error: Unable to locate tag attribute inf