I would like to insert column headers into a Write labview measurment file

I am looking for a simple way to add column headers to my saved data. I
am working with dynamic data VIs and would like not to have to build
several arrays to do this.

See the attached VI, I think this is what you are looking for ... property node on a table, output of Build Table 2.vi, to which I feed a bunch of merged signals.
Certified LabVIEW Developer
NI-VLM Administrator
Attachments:
Name Columns.vi ‏20 KB

Similar Messages

  • Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

    Running Illustrator on CS4. Would like to insert photo image into body of type. Would appreciate any guidance. Thank you

    Use a clipping mask.
    Illustrator Help | Clipping masks

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • How to put the proper header at each column in write to measurement file (.lvm) ?

    Hi,
           i would like to know one thing about the write to measurement file. Can i put the proper header at each column in write to measurement file (.lvm) ? and how can i do for it ? Could you show me a way to make it ?
    i am looking forward your kindly reply.
    thank you so much ..
    best regard,
    roxy

    Hi Mike,
                  Thank you very much for your help. It works .
    By the way, i would like to ask you about setting time interval. In the pic, X_Value column is for time column
    i would like to ask that when i use the write to measurement file, there got the x column that show time inside the excel file. In this column, i would like to set the time interval at every 210ms .The data may come in every msec but i just want to record the data at every 210ms .  for example, 210ms-420ms-630ms ..etc. how can i set it ?
    One more thing .. can i do it in graph as well ?
    i am looking forward your kindly reply.
    Thank you for your time.
    Best Regard,
    Roxy

  • I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

    I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
    Can you help me ?

    The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what?  Or is it the brackets that makes the separation between the three pieces of data?
    If it is always a single tab, that makes it really easy.  All you have to do is find/replace the brackets with nothing (as Wayne said)
    If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
    If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
    If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

  • How to insert column values into database as rows

    Hi,
    I have 8 columns and some not null columns. Based on not null columns I want to insert into table as rows. The 8 columns may contain values or no value. If the first column contains data, then I have to insert into one row. if the second column contains data I have to insert a row and in second column. respectively...So How can I insert column values into rows. Can I write 8 insert statements. (OR) is it possible to insert data from columns using where clause.
    Please help me out....
    Thanks in Advance

    Lines Table:
    line_id, orcl_bank_account_num, product_type, service_type, lease_type,
    funding_type, cpi, billing_frequency_unit_cd , annual_due_date ,
    pricing_start_date, pricing_end_date, install_date, contract_end_date ,
    prdct_replacement_cost_amt, cradle_replacement_amt, supranet_contract,
    issuance_fee, board_inactive_date, header_id, creation_date, last_modified_date,
    created_by_nam, modified_by_nam, activeinactive_flg, prdct_bill_amt_yr1,
    prdct_bill_amt_yr2, prdct_bill_amt_yr3, prdct_bill_amt_yr4, prdct_bill_amt_yr5,
    prdct_bill_amt_yr6, prdct_bill_amt_yr7, prdct_bill_amt_yr8, activation_fee_yr1,
    activation_fee_yr2, activation_fee_yr3, activation_fee_yr4, activation_fee_yr5,
    activation_fee_yr6, activation_fee_yr7, activation_fee_yr8,
    In this table the columns structure is :
    -- PRDCT_BILL_AMT_YR (1 to 8) NUMBER(14,4)
    -- ACTIVATION_FEE_YR (1 to 8) NUMBER(8,2)
    I have one more table:
    PRDCT_INS_AMT               NUMBER(14,4)
    ACTIVATION_FEE_AMT          NUMBER(14,4)
    I want to insert prdct_bill_amt_yr (1 to 8) columns data into PRDCT_INS_AMT column. similarly activation_fee (1 to 8) columns data.
    But the data should be inserted based product_type, service_type, lease_type columns values. (These 3 columns may contain upto 45 combinations).

  • HT2589 I have two Apple ID accounts, with which I purchase music,  I would like to consolidate those accounts into one, how can I do it?

    I have two Apple ID accounts, with which I purchase music,  I would like to consolidate those accounts into one, how can I do it?

    Stop using one. Everything you've previously purchased from it has that Apple ID stored inside the file, which can't be changed.
    (66245)

  • How do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    how do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    Hi..
    Thanks for the reply..
    My original I Phone 5 was running IOS 6.12
    My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
    Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
    I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
    So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
    I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
    but it doesn't help me..
    Steve

  • I have just purchased a new desk top. Would like to get my itunes into my new computer. I have downloaded it into my new computer, but how do I get the tunes I have from my other computer into this itunes in my new computer? Thanks

    I have just purchased a new desk top. I would like to get my itunes into my new computer. I have downloaded the itunes program.  How do I transfer the tunes I have in my itunes account into this computer?  I know I have done it before, but can't seem to find how to do it.  Thanks.

    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.

  • I would like to format my printable into 8x10 so when I save it as a png it will be 8x10

    I would like to format my printable into 8x10 so when I save it as a png it will be 8x10

    Saflo33 you have posted to the Creative Cloud forum.  Which Adobe software or service is your inquiry in relation too?  I would recommend posting your inquiry to the forum specific to that software title.  You can find a list of the available forums at http://forums.adobe.com/index.jspa?promoid=JZEFM.

  • I would like set up my contacts into groups.

    I would like set up my contacts into groups. 
    There seems to be no way to do this in either iOS or OSX.  Android figured this out and I see no reason why Apple can't give us the capability to group medical contacts for example into an easily accessible group without having to resort to using Dr. as the first part of the last name in order to have them in a convenient group.
    There are many posts that ask for this and Apple seems to have no desire to give us something useful in the entire spectrum of software while fiddling around with watches etc.

    In the Contacts app in OS X click the "+" at the bottom and choose New Group. Once groups are created just drag the entries into the group list on the left in the Contacts app. You may have to go to the Contacts View menu and click Show Groups.
    You cannot create groups in iOS, or assign contacts to groups using the built-in Contacts app. However, there are several 3rd party apps that allow you to move contacts among groups. I use Speed Names, but there are several others that people have told me are easier to use.

  • HT4007 I have multiple libraries. I would like to import one project into another library. How?

    I have multiple libraries. I would like to import one project into another library. How?

    Select the project in the Library Inspector and export the project as library. Then import this library into your other Aperture library.
    File > Export > Project as New Library
    File > Import > Library
    Regards
    Léonie

  • I would like to insert an e with circumflex accent in small caps on word office MAC, any tips?

    I would like to insert an e with circumflex accent in small caps on word office MAC, any tips?

    In Word Command/Shift-k turns on and off small caps. e and 3 gives you what you are looking for.
    HOPê this helps
    PJRS

  • How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

    How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
    Regards,
    John

    Hi,
    Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
    #http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT201250 i would like to use time machine but also back up other file to my external drive?

    I just got a WD T3 external hard drive and I would like to use time machine but also back up other files that to the drive.  Can anyone help me out.
    Thanks Mark

    You would need to go to your Applications folder>Utilities>Disk Utility> and there create Two Partitions on your external hard drive, naming them differently.  Then you could go back to your desktop, open the dock, right click on the Time Machine icon and select "Open Time Machine Preferences". In there select the external hard drive Partition that you want to use for TM.  The other external drive partition will be available for other uses.
    Hope this helps

Maybe you are looking for

  • Infospoke BADI -- no change in structure?

    Hello Experts, We have three fields in: rsbo > edit infospoke INF1> transform 1) Source structure 2) Target structure 3) Addin Implementation. -- I want to create a BADI and do not want to change the structure. But set some values in another table wh

  • Printing PDFs via cups ignores job attributes

    I'm trying to print PDF documents from Linux (using CUPS to translate the PDF to Postscript before sending it to the printer). However, the print job attributes (number of copies, paper size, etc) are all being lost somewhere in the translation. I'm

  • Is it possible to create a UDF at item_pressed event?

    Hai, I have designed a form with some edit text and one Button. When Button is pressed, given values are stored to a table Master Table. At the same time I want to insert a particular edit text value as a field in another No Object Table. Is it possi

  • Screen Sharing Crashes On Launch

    When I launch Screen Sharing, it crashes immediately. Here's the error report: Process:         Screen Sharing [457] Path:            /Applications/Utilities/Screen Sharing.app/Contents/MacOS/Screen Sharing Identifier:      com.apple.ScreenSharing Ve

  • Reverse Engineering db schema - UML & Stored Procedures

    Do any of you kind folks know of an open source plug-in for SJSE or Eclipse that can reverse engineer a Sybase ASE schema to a UML class diagram? I also need to edit existing stored proceedures in Sybase ASE and I am hoping to do this in SJSE or Ecli