I would like to know if a USB 2.0 Hub will function well in a 2014 rMBP USB 3.0 Port?

I just purchased a rMBP and I need 4-5 powered USB slots for devices. There have been many reported problems with USB 3.0 Hubs on the rMBP. I want to know if anyone who was having problems was able to return to using a UBS 2.0 Hub?
Will a USB 2.0 Hub function through the New rMBP's USB 3.0 port? Will there be spontenous errors and freezes?
My devices are all USB 2.0

I knew it was several years old, I had one and never got it to work with my iPhone 3G. I use the Kensington, looks like half a ball, but just about any new one should work. Keep in mind if you connect a lot of devices that are pulling power it may affect it.
Polls are a violation of the Terms of Use here so I wouldn't post one. You might check with http://www.iLounge.com and read the reviews there.

Similar Messages

  • Its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

    HI, its my first time buying apple product from online, I'm from Sarawak, Malaysia, i would like to know what type of post/delivery service will be used to deliver the product i ordered to my house address.

    iPhones, iPads, iPods are dispatched from China.  Apple accessories are dispatched from Singapore.  The carrier is FedEx.
    Online purchases could be delivered to office addresses or home addresses.  Track your item through the email sent by Apple.  If necessary,  you could change the delivery address to your office one.

  • HT1807 I am travelling to Ireland and would like to know what type of power converter I will need in order to charge my Iphone 4S

    I am travelling to Ireland and would like to know what typw of power converter I will need in order to charge my IPhone 4S.

    The iPhone charger is capable of using any voltage from 100 to 240v.  So you won't need a converter.  All you will need is a plug adapter like this:  http://www.adaptelec.com/wa7-travel-plug-adapter-for-england-ireland-etc-type-g- bs-1363-p-3.html

  • I would like to know when the slow motion video recording will come in 5c. in which update u will release it.

    Dear sir ,
    i would like to know when the slow motion video recording will come in 5c. in which update u will release it.

    I'm afraid the processor in the iPhone 5c does not support that feature. Since you can't change the hardware setup inside the phone, this will probably not be introduced at all for this model.

  • Several questions . one i will be taking lots of notes and would like to know what app is best as i will be wanting to save them to sent to others, secondly what app is it that i would use to change words to voice... i do have an iPad2 64meg and wifi and

    i have an iPad 2 and will be taking lots of notes which will have to be saved.. what is the best app i am use to microsoft word .. also i would like to know what app or how to get written to voice.. many thanks..

    I have had a great experience with UPAD.  You can take notes on PDF files as well as use your finger or a stylus to take notes on a variety of blank page backgrounds.  You can then email your notes as a PDF if you want.  I know there are other features, but those are the ones I typically use.
    What I really like is the writing interface.  You can pick line color and thickness.  Whe writing area is magnified so you can write easier and the text appears normal size on the page, though I believe you can write without the magnified area to if you want to.  You can easily move the writing area where you want it, and it is easy to keep uniform indentation for lists and columns.
    It's easy to start using in minutes.  I got my iPad last year right before a huge national conference where I wanted to take notes in a lot of educational sessions.  I also did not want to lug all the handouts with me across the country.  I found UPAD after some research and decided to give it a try.  I downloaded all the handouts right before I left.  I was able to figure out how to take notes on a PDF as well as create a new notebook for other content during the speaker introductions.  And when I got home, I sent some notes to a colleague.  All very easy.
    I'm sure the description in the app store is much more helpful, but I wanted to share some examples.

  • Hello. I Live in France and I would like to know if I buy an american iphone, will my french sim card will be compatible with it

    there is a GSM compatible "thing", and I don't know if my french sim card will work on the iphone 5c
    Waiting for your help
    Thank you
    Alex

    I could save 185 euros (without taxes and everything), the shiping is said "free"; but they don't ship it to France so the problem is solved..
    I never broke a phone or lost one and my life style doesn't expose me to thieves, so I was counting on my Goog Luck

  • I would like to know If suppose my iphone is lost will the other guy can use it by changing the IME Number, will it be tracable if he does that

    Hi
    Any can help me out for my question

    The only way to locate any lost iPhone is through Apple's Find My Phone. However, Find My Phone must be turned on/activated, & your phone must have Internet access. If someone finds your phone, and your phone was passcode protected, all the person has to do is force the phone into recovery mode & restore it as a new device. Doing this will prevent your phone from being located. If you report the loss to your carrier, and your carrier offers blacklisting, the phone will not be able to be activated, for use, on that carrier's network. If your carrier does not offer blacklisting, your phone will be able to be activated for use.

  • Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot?

    Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot? And if so can it be through wifi or does it have to be Bluetooth or USB?
    Sounds like an odd question but my phone will connect to BT Openzone so I want to share that with my iPad via personal hotspot. I could use 3G but then it comes off my data allowance and I don't want to have to buy a separate SIM for my iPad if I can avoid it. I can swap my sim from my phone, but that's a pain!
    Thanks
    Luke

    No, unfortunately Personal Hotspot will only use your 3G plan.

  • I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

    I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Here's one way to install. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • I am trying to play my digital music off a hard drive onto my home stereo.  I would like to know if the mac mini can just hook to my processor and play music through the processor(preamp) on my home stereo speakers?

    I currently have a nice home stereo component system.  I also have a 500 GB external hard drive loaded with music.  I am looking for a way to play the music off this Hard Drive onto my home stereo system.  I currently have a WD home entertainment box that I can play movies that I download off the Internet on my TV, of course piped through my home stereo for the sound.  I would like to know if the mac-mini could be used in this form also.  Just have the HD hooked to it, the TV would become my monitor and the mac mini would play the music ... RANDOMLY ... with the use of iTunes.  This of course would be hooked up to the home system with an hdmi cable and the HD hooked up through a USB connection.
    Just would like to know if this could work?

    Yes. Is the short answer.
    You can directly connect the speaker out port of the Mac mini to an input on the AV Receiver which then feeds your speakers. This would be an audio only solution. If you use a TOS-Link connection this will be a pure digital connection ensuring the best quality (important for audiophiles).
    You can if you wish connect the video from the Mac mini to the AV Receiver, and if you have a Mac mini with HDMI or a Mini Displayport you can run the audio and video via a single cable. (Older models would use two cables, the aforementioned TOS-Link pus a DVI to HDMI cable.)
    If you do connect the video output from the Mac to the AV Receiver you can then display this on your TV, and have as one possibility iTunes displayed with perhaps one of the iTunes visualisers playing along with the music. Another possibility would be to use FrontRow on the Mac.
    A different approach would be to have the Mac mini stream over a network to a device e.g. the Sonos Zoneplayer which is then connected to the AV Receiver. An AirPort Express is also able to do this.

  • I would like to know the best way to scan music into a pdf format which I can then sync with ipad

    I would like to know the best way to scan music into a pdf format which I can  then sycn with ipad

    smgchandler,
    Any camcorder that can connect via USB or that can save to an SD card can interface with an iPad if you have the iPad Camera Connection Kit so that you can watch your videos on the new iPad's beautiful retina display.  You can find this on the Apple website or in most big box retail stores.
    http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE

  • I just purchased Mac OSX Snow Leopard Software Version 10.6.3 before I install I would like to know if it will still keep my documents, etc? and not lose them?

    I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3.  At present my MACBOOKPRO is Mac OS X Version 10.5.8.  Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them?  Appreciate any help?
    Darci13

    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • I have a mac osx 10.5.8 I would like to know how to clean it up it is running slow.

    I have a mac osx 10.5.8 I would like to know a good program to use to clean it up, one that does not cost an arm and a leg, free would be better.

    Hello,
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much free RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?
    Also...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • I would like to know about MIDI,

    I would like to know about MIDI,
    Are there information or code?

    honestly, i didnt know anything at all about programming MIDI and i learned
    it in a day (well enough to make a software synth for my usb keystation in one night).
    the java docs and some simple googling pretty much covered all the bases.

  • I would like to know if using a auto charger on my iPhone 6 plus will reduce the battery life or cause any other issues.

    i would like to know if using a auto charger on my iPhone 6plus will reduce the battery life or cause any other issues with my phone.

    An alternative is to use a 12v USB power plug and then just use the standard lightning  cable to connect with a length of your choice ( to some degree)
    Same rules apply use a premium manufacturer rather than a cheap no-name from eBay

Maybe you are looking for

  • How to restrict users to download, copy and print the documents from document library

    I want in SharePoint documents which I uploaded in documents library. no user will be able to download, copy and print. How it can be possible these types of restrictions apply?

  • Bluetooth completely lost on both keyboard and mouse

    I have an Apple wireless keyboard and MacMice The Mouse BT, used with an AL15 PowerBook, OS 10.4.6. Recently both devices became inaccessible. I have tried re-setting up the devices, changing batteries in them, turning BT off and on, restarting PB et

  • Trace Analysis

    Where can I obtain the details and "interpretations" of a trace, i.e., what does ringmode=1 mean?; what does CallState=1 mean? Where can I get whatever all the trace headings, messages, etc.??????? If anything, we don't have any CCM plugins, and we d

  • Settings of  live stream for FMS 4.5 on Amazon

    Hi. We are cureently have an issue with setting up an outcoming stream for a livechat. We are using FMS 4.5 on Amazon and OSMF player. When streaming from FMLE everything is working fine. But when streaming from  as3  we receive  buffering status of

  • Date delimit functionality when maintaining Z table

    Hi all, I have Begin date and End date fields in a Z table and  i want to achieve automatic date delimit functionality. So i have the subscreen area in my screen and called a std program and screen inside the subscreen. I have writen the below coding