I would like to programatically make settings on the SCXI 1520 Strain Gauge module. From MAX, I see that you can set the Gain, Fil

ter cutoff freq, Voltage Exc, and Bridge Config. And from the LabVIEW help for AI Parameter, that these correspond to parameters 13,14, 17 and ?. Bridge Configuration is not listed. Which parameter is used to set this? Is there an example VI available?

Hi Frank -
Looks like Michael's post from 2001 is no longer current. Let's update the list of resources available for this module.
You can find the user manual for anything at ni.com/manuals. The manual for the SCXI-1520 is currently here.
If you're programming in LabVIEW, you can find example programs for this device in the Example Finder. (Click Help » Find Examples to open it.) I recommending filtering by your hardware. To do so, click the Hardware list in the bottom-left of the window and select "Add device". After adding the SCXI-1520, select it from the list and check the Limit results to hardware box. This will filter our examples down to the ones that work with your device. They'll probably all be in the "Hardware Input and Output » Analog Measurements » Strain" folder.
You can also search Support for the 1520 to see KnowledgeBase articles on it.
And you can search the Developer Zone for additional example programs or whitepapers/app notes on this device.
David Staab, CLA
Staff Systems Engineer
National Instruments

Similar Messages

I would like to pay for apple tv rentals with a different credit card from my iTunes Store. How can I do that?

I would like to pay for apple tv rentals with a different credit card from my iTunes Store. How can I do this?

Any purchases made from the iTunes Store, on your computer, AppleTV, or iOS device, use the same billing information that is associated with your account. To pay with a different credit card, log in to your account and change the payment options associated with your account. If you want to use different payment options on different devices, you may want to consider utilizing multiple iTunes accounts, each with its own payment options.
To learn more about changing your iTunes account information, see this article: http://support.apple.com/kb/ht1918

I would like to buy adobe muse. I live in Turkey. However, creative cşoud says that you live in bolivia and can not buy this item

i would like to buy adobe muse. I live in Turkey. However, creative cşoud says that you live in bolivia and can not buy this item

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

I am using an iMac7.1 with 1GB DDR2 SDRAM of speed 667 MHz on board memory. I would like to know what is my best option to upgrade to 4GB on board memory so that I can run Lion OS. Is there a speed limit of the DRAM I can use? Please recommend.

I am using an iMac7.1 with 1GB DDR2 SDRAM of speed 667 MHz on board memory. I would like to know what is my best option to upgrade to 4GB on board memory so that I can run Lion OS. Is there a speed limit of the DRAM use? Please recommend or suggest as soon as possible.

You can install 2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs. The maximum amount of RAM is 6 GBs. Visit DataMem or OWC to get the proper RAM at reasonable prices.

I have a lot on books on my Kindle account. I have downloaded the app onto my IPAD but can only access my books when connected to WIFI, i would like to read them offline. Have I missed a download step. Thanks for any help you can give.

I have a lot of books on my Kindle/Amazon account. I have downloaded the Kindle app onto my IPAD mini by can only access my books when connected to WIFI, how can I read them off-line?

Yes, you've missed the download step.
Open the Kindle app and navigate to your Library. There is a tab at the bottom that says Cloud | Device. Tap the Cloud tab and tap the books you want to download to the device. You will see a progress indicator during the download. Once it's done, read away!

How do you set up so that you can view the alternate text on an image when you hover over it like you do in IE?

Using Mozilla at present the alternate text for an image does not pop up when you hover your mouse over the image. This is what occurs in Internet Explorer. In Mozilla Firefox you have to right click, choose Properties and then you can view the alternate text. Is there a way to set up the mouse hover? Or is there a keyboard shortcut to at least view the Properties information of an image on a webpage quicker?

The Alt attribute isn't meant to show as a tooltip on hover.
The Alt attribute is meant to show if the image isn't or can't be displayed.
The title attribute is meant to show if you hover an image or link.
*http://kb.mozillazine.org/Image_tooltips_do_not_work
Some extensions can interfere and disable the tooltip.
* [[Troubleshooting extensions and themes]]
* http://www.w3.org/TR/html401/struct/global.html#title title
* http://www.w3.org/TR/html401/struct/objects.html#alternate-text
*Popup ALT Attribute: https://addons.mozilla.org/firefox/addon/1933

Can I view all my bookmarks in the bookmarks bar, even if there are too many... I would like it to make extra rows and continue, instred of the arrow/list system.

I like to have instant access to all my bookmarks as I keep my RSS links and current projects up there. When there are too many to fit in one row across the screen firefox makes a little pull down menu at the end with all the rest in. I find this really annoying, its just the same as the normal bookmarks menu; I find it really hard to keep things organised when I can't see them all the time. I would like it to make a second or even third row in the tool bar so I can always see all my current RSS and Pages. Can I do this? If it wont work on firefox does anyone know of another FS, OS or FOSS browser that will?

Unfortunately, the extension does not work with Firefox 4, and Alice have no intentions to upgrade it.

I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so. My understanding is that you can click on the phots that you want to move and drag it to a new loca

I am working in photshop elements 13 organizer, album view, and would like to resequence (rearrange) the photos shown in the album but am unable to do so. My understanding is that you can click on the phots that you want to move and drag it to a new location within the same album. After i select the photo that I want to move and click on the photo, I get a cirlcle with a diagonal throught it and am unable to drag the photo to its new location. What am I doing wrong? I know this should be a simple thing to do. Thanks

Jimmy RG
In the Elements Organizer 13
The key to all this is to click on/select/highlight the Album that you have created in Local Albums.
Then make sure that the Sort By: (in the row below the highlighted "Media" header is set for Album Order.
You should see a number at the top left of each of thumbnails.
Then, click on the thumbnail that you want to move, hold down the click, and drag the thumbnail to the wanted new location
in the line up of thumbnails.
Often I had to press down hard on the drag.
Please let us know if that worked for you.
Also, in Edit Menu/Preferences/Keyword Tags and Albums/Enable Manual Sorting Options, I set all for manual.
ATR

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.

I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.

Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Can any one guide me in this. I would like to start my certifications in VM Ware. Especially in cloud. I saw there is an exam for the new starters .(VCA). it is enough or should I go for any other Training in MCSA (Server).

Can any one guide me in this. I would like to start my certifications in VM Ware. Especially in cloud. I saw there is an exam for the new starters .(VCA). it is enough or should I go for any other Training in MCSA (Server).

VCA is to make sure that you have a understanding of the general concepts before you go to do a full VCP course.
I have taken the VCA datacenter and it was very much a case of: What product does what?
You wouldnt get a job on merit of having a VCA where as you would with the VCP.

I would like to upgrade my OS to Yosemite however, I have a bunch of tabs in firefox that I would like to restore, Will I be able to do that after updating?

I would like to upgrade my OS to Yosemite however, I have a bunch of tabs in Firefox that I would like to restore. Will I be able to do that after updating to the new OS? I do not want to go through and bookmark everything! Thank you for your time!
~Joshua

Yes you will be able to (and you should also update Firefox to 33 while you're at it) [[Update Firefox to the latest version]]
Just to be safe, make sure you back up Firefox [[Back up and restore information in Firefox profiles]]

I would like to get iMovie for my mac book pro I got it from the apps store but when i download it right at the end it says It will not download

I would like to get iMovie for my mac book pro I got it from the apps store but when i download it right at the end it says It will not download i need help i bought my mac used if that makes a difference

Hey hvs2340,
Thanks for the question. I understand that you are experiencing an issue downloading iMovie from the Mac App Store. The following resource may provide a solution:
Troubleshooting the Mac App Store
http://support.apple.com/kb/TS3624
Thanks,
Matt M.

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

I would like to connect my Apple TV 3rd gen to a projector and not an HD TV (so I can watch movies on the big screen). Are there any decent price compatible projectors? Good quality but not professional! Many thanks

Thank you for the answer, I suppose the main thrust of my enquiry is to find out if 65 MBits is my ATV theoretical limit of reception. If that is the case then I am happy as a Pig in Mud
I may have allowed myself to become a victim by listening to Fanbois posting elsewhere who always seem to go one better than everyone else. Now I have learnt two things Today; 65Mbit/s = Good enough and only read the apple forums.
Many Thanks
Nick

I have a few devices on one apple id and would like to switch out one of my phones so they have there own apple id do I have to restore the phone as new or can i somehow switch it without losing all apps and music in iTunes

I have a few devices on one apple id and would like to switch out one of my phones so they have there own apple id do I have to restore the phone as new or can i somehow switch it without losing all apps and music in iTunes?

Hello lynnettefromsk,
The article linked below details all of the locations that you may need to change your Apple ID. This process should not affect the state of anything on the device at the time.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Cheers,
Allen

What I would like from Cisco is the meaning of all level 3 or lower email messages my Router can send to me. So, that I can take the appropriate actions.

v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
My Small Business Router has been sending me email messages. This is a RVS-4000 version 1.
I just want to understand what my Router is emailing me or telling me...
The last message I received from my RVS-4000 was:
Oct 30 13:44:09 - IPSEC EVENT: KLIPS device ipsec0 shut down.
IPSEC EVENT sounds important. Whatever it is... And what is a KLIPS device ipsec0 shutdown????
I have Log Levels 0-3 selected...
Log Level
Setting which level log Router should recorder. Level from 0 ~ 7 means:
0: LOG_EMERG(system is unusable)
1: LOG_ALERT(action must be taken immediately)
2: LOG_CRIT(critical conditions)
3: LOG_ERR(error conditions)
4: LOG_WARNING(warning conditions)
5: LOG_NOTICE(normal, but significant, condition)
6: LOG_INFO(informational message)
7: LOG_DEBUG(debug-level message)
So, when I get any messages... I'm a little concerned. Because the RVS-4000 thinks it's an Error or better.
What I would like from Cisco is the meaning of all level 3 or lower email messages my Router can send to me. So, that I can take the appropriate actions.
I know Cisco inhered these Small Business Routers. When they bought Linksys. However, they have not discontinued them totally and they are still for sale. And Cisco has released a new version 2 of the same Router. So I believe Cisco should support them as well.
Yes, I'm a pain to Cisco. However, I think you understand I'm being scared by my Routers messages to me... And would like some relief.
Bruce

Great suggestions. Problems is this is not the forum for your "wish list" as Apple does not read these USER forums.
Send your feedback to http://www.apple.com/feedback/iphone.html

I would like to programatically make settings on the SCXI 1520 Strain Gauge module. From MAX, I see that you can set the Gain, Fil

Similar Messages

Maybe you are looking for