I would like to replace Logic board on Macbook Pro 15" 2011 2.0Ghz to 2.3Ghz Logic board. Is it possible or not?

hello apple,
i have Macbook 8,2 Quoad core Intel i7 2.0Ghz 2011.
the problem is it not working on startup (startup with blue , gray or black screen)
already go to apple service center, they said i have to replace the new Logic Board 2.0Ghz.
but i would like to replace to 2.3GHz quad-core Intel Core i7 Logic Board.
my question why can not replace 2.3GHz quad-core Intel Core i7.
you know why because it bulit in USB 3 ports (up to 5 Gbps).
Many Thank,
Manthou Khorn

The 2011 MBPs do not have USB 3 Ports.
Check with iFixit.com and Powerbookmedic.com for logic boards for your MBP. They will have prices and installation instructions.
Ciao.

Similar Messages

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?

I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa

I have an iMac (800 mb, with O/S 10.3.9) with bookmarks and would like to transfer them to my MacBook Pro, but I have no idea how to do it. Please help.

Please feel free to contact me directly at [email protected]
Thanks for your help.

Use a USB flash drive or connect the two to your home network and use file sharing.
Note that have a MacBook Pro, not a PowerBook, running 10.6.4. Update it to 10.6.8 - Mac OS X 10.6.8 Update Combo v1.1. You can then install Lion or Mountain Lion so you can use iCloud.

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

After logic board replacement and software update, MacBook Pro is spontaneously shutting down and preventing restart. Inconsistent ability to restart after multiple tries. What is going on?

Hard drive sensor or logic board failure.
Try a SMC Reset, only thing I can help.
http://support.apple.com/kb/ht3964
Check your tones with this sounds like it's not recognizing the RAM, perhaps it's not seated well or making a bad connection or it's defective.
http://support.apple.com/kb/ht1547
Take it back. three times a charm

I would like to replace a keyboard in my Pavilion 15-p 199sa ENERGY STAR

Last February I bought my first laptop from Currys Pc world. Once at home I noticed that the touchpad was faulty: lifted up on the upper left corner. I should have brought it back on the following day, but shame on me, I did not. Now I do not mind to pay for a new keyboard, and replace the old one to get the problem sorted out. but I do not know where or how to get it. I tried to open the link: Hp Support, Replacement parts, but this web page is not available. I sent an email to hp support and i have been told: "Based on the information provided you have purchased your unit from the Dixon's Store Group (DSG). The DSG have an agreement with HP, where they support the standard 12 month warranty on your product.
Because of this agreement with the DSG, your product is out of warranty with HP, therefore please contact your point of purchase for any support you may require". Now I do not feel to bring the laptop to Currys, because I tried to fix the touchpad and I have scratched the keyboard a bit.
Therefore, my friends be aware that when you buy an HP laptop from Currys Pc World, your product won't have any Hp warranty.
I went to Merchant Square in London to Hp Total Care Centre: but the shop has disappeared.
I will try over the phone.
(Probably it would have been the case to buy from a laptob brand that is also the laptop manufactorer)

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck!

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

Portege R200: I would like to replace LCD screen

Hi all... This is my first post here, sorry for my basic questions...
My R200 screen has broken and I would like to replace it for as 'CHEAP' as possible...
I have looked online and seen an official one for over £300.
I have seen 2 different ones on Ebay... one for £165 +p&p, the other is for £100 +p&p.
links below:
==============================
[http://cgi.ebay.co.uk/BRAND-NEW-SCREEN-FOR-TOSHIBA-R200-12-1-XGA-LCD_W0QQitemZ180210412083QQihZ008QQcategoryZ31569Q QcmdZViewItem]
-and the one below is for £100 which is my prefered option
[http://cgi.ebay.co.uk/NEW-12-1-XGA-TOSHIBA-PORTEGE-A200-R100-R200-LCD-SCREEN_W0QQitemZ170204943757QQihZ007QQcategoryZ315 69QQssPageNameZWDVWQQrdZ1QQcmdZViewItem]
====================================
-Would this item work?
-Is it easy to replace?
-Any tips or recomendations?
-And most importantly.... Can I get this cheaper anywhere else???
Thanks in advance
Super D

Hi
Both screens seems to be designed for the Portg R200 thereofre I dont see any serious reasons why you should not use it.
> Is it easy to replace?
Its not easy to replace if you have no experience! In such case I would recommend contacting an notebook technician.
> And most importantly.... Can I get this cheaper anywhere else???
As you know the market makes prices just google for a better offer.
Cheers dude

I would like to replace my retina display

I would like to replace my retina display because of image retention. Is it possible to replace it?

Look at the iFixit.com and Powerbookmedic.com web sites for parts, prices and instructions.
That is NOT an easy repair.
Ciao.

I would like to replace my 4 cell battery in my HP Envy 17" with a much longer lasting battery

I would like to replace my 4 cell battery in my HP Envy 17" with a much longer lasting battery

You would get the details here:
http://partsurfer.hp.com/search.aspx
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Replacing logic board uni macbook pro 17"

I want to upgrade my macbook pro 17 early 2009 by replacing old logic board with logic board of macbook pro 17 mid 2009 (3.06). Is it compatible with newer one?

I can't find a definitive answer to this question, though my suspicion is that it may be compatible. But if it is, you'd be paying a very large amount of money for a speed upgrade of almost negligible significance. (2.66GHz or 2.93GHz to 3.06GHz). At most that's a 15% improvement — barely perceptible, if perceptible at all, in day-to-day use.

Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

Is reinstalling Photoshop CS6 still OK? My #1 machine is bogging down in Bridge, and I would like to replace the old klunker on #2

Larryt48503521 you are welcome to install Photoshop CS6 on a new computer. You can find details regarding the activation process at Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

I have a sequence on tcp that is Standard Def. I have a new set of files in High Def that match the old files. I would like to replace all the SD footage with the HD footage. Anyone know of a workflow to do this task?

I have a sequence on tcp that is Standard Def. I have a new set of files in High Def that match the old SD files. I would like to replace all the SD footage with the HD footage. Anyone know of a workflow to do this task?

Do a media manage of the sequence converting the files to the appropriate HD format making the clips offline. Then simply reconnect the offline clips to the HD clips. There may be issues in the file names, but they can usually be worked out either with the naming options in media manager or renaming your hd files. There are many utilities that allow you to batch rename files.

Replaced logic board on MacBook Pro; now I must reauthorize!

I've just synched my iPhone with my MacBook Pro which came back today after having its logic board replaced under the nVidia issue recall program. But I am not that comfortable with the idea that I've now used up 2 of my 5 computers for apps/songs etc.
What can I do? I imagine that I need to inform Apple to de-authorize my previous logic board. But how?

If you weren't able to de-authorize your MBP before sending it in for the logic board to be replaced, I don't believe you can reset or de authorize all currently authorized computers until you reach or authorize 5 computers. You can then do a complete reset or de-authorize all authorized computers followed by re-authorizing the computer you are currently using.

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

HT202667 Would like to replace ALTERNATE APPLE ID in the AppleID Utility

As you can see, the ALTERNATE APPLE ID is separate from ALTERNATE EMAILS. I would like to change the AppleID. As you can see there is no edit option. And adding an email is not the same as an apple id. Can anyone help me?

See Here for assistance...
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html

I would like to replace Logic board on Macbook Pro 15" 2011 2.0Ghz to 2.3Ghz Logic board. Is it possible or not?

Similar Messages

Maybe you are looking for