I would revert back to the old bt vision box in a ...

Wasted too much time with freezing screens, black screens, slower navigation. Will probably switch to Sky

You are talking to users just like yourself. The experts on this forum are volunteers. Strongly recommend you stay with Fx4 otherwise you'll never catch up. Fx5 is looming.
Try {Ctrl + Shift + B}.
Right click toolbar space>Customize. In the icons box, depending on your setup, you might find bookmarks icons>drag to a suitable toolbar.

Similar Messages

  • HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

    I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have?  Is there a way to revert back to the old itunes?

    I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
    The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

  • I have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

    i have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

    Safari is part of OS X and isn't available as a separate download. How did you get a newer version than the one that comes with Lion?

  • How to revert back to the old code in NWDI ??

    Hi,
    I have done some changes to one of the DC and have released the activities and imported that in consolidation tab in transport studio of CMS.
    Now my client do not want the changes we did, and he is asking me to revert back to the code that was prior to my changes.
    I want to know how to do this in dev. and Qa system, as we have moved our changes to QA also.
    What i have done is, i went to consolidation tab (in transport studio), i, went to "go history" and i have selected the activity that was imported to consolidation just prior to my activities, and than i clicked on import button. and than i went to assembly tab and i assembled that activity.
    than i went to Qa portal, but still its showing my changes only, its not showing changes that was made prior to me.
    What i m missing here?? and how to restore old code in dev and Qa system ??
    please help
    regards
    vikas

    HI,
    you can get back the changes done in an activity as a local copy in the following way:
    go to CBS web UI, click on compartments link'
    under that search for your DC, and click on view all link.
    you find all the activities under that DC. copy the integration time .
    switch to DTR perspective,
    righ tclick on the DC, choose Advanced sync, sync to date, give the integration time you got from CBS and click on ok.
    Regards,
    Satya.

  • How do I revert back to the old operating system?  The new upgrade that came out totally disabled my WiFi and the default backgrounds changed to white instead of bla k.

    An upgrade was sent to my Samsung Galaxy S5 phone on 3/27/15 and it ruined my phone.  I no longer have the ability to Wi-Fi.  When I swipe the phone on there is a clicking sound and the scree goes directly to my keypad.  I want the phone to go to my home screen like it did before.  My apps that had a black background now have a white background which is impossible to see outdoors.  I want the black background back for settings, clock, and calculator.  Samsung tech support says this stuff is default with the new upgrade.  How do I revert back to the version I had before without having to put the phone back to factory settings and lose all my pictures, memos and other files I have accumulated over the last year that I have had the phone.  I am desparate.  Please help me.  Send an e-mail to (removed)
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    You cannot revert back without voiding warranty and we cannot discuss the methods to do so.

  • Revert Back to the old status from newif error occurs in ServiceDesk Ticket

    Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
       When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
       In short please provide enhancement or routine or function module which can revert back to old status.

    Although it might be manifesting itself slightly differently in LP8, I just wanted to chime in here and say that I've had that problem with LP7 as well. I import a lot of mp3's, and most of them work, but every once in a while it would get confused and I'd see that message. It's been a while so I don't remember specifically what I did, but I do know that with a little tweaking of the name it will work fine. If memory serves, when the file in question had the suffix actually in the name itself (filename.mp3), I'd just take the suffix out and it would recognize it. Although it could have been the other way around, adding the suffix to an mp3 file that DIDN'T have it in the name. Point is, it was an easy fix, and with a little name tweaking LP7 was able to understand. Hopefully that's all it will take with LP8 too.
    Good Luck!

  • How do you get an updated Apple ID to change on your iPhone?  I've changed logged in using the new ID and password but when I go to synch my apps, it reverts back to the old ID

    I've changed my Apple ID on iTunes and my MacBook Pro, iPhone, and iPad.  When I try to update my apps on my iPhone, it reverts to the old Apple ID

    It sounds like your device might be in Activation Lock.  Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
    If so, do you recognize that email?  Do you have an Apple ID that fits the same format?  If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device.  If so, turn off the device, then remove the device from the list.

  • Is there a way to revert back to the old OS?

    I got a iPod Touch last week and it was able to connect to my home wireless and work wireless network just fine. I then downloaded the 3.0 OS and it will still connect to my home wireless [Belkin G+ Wireless] BUT only if I'm in close proximity [like 10 ft], but it won't connect to my work wireless [Cisco] at all. I know there are a few posts on the non-connecting issue, but I want to know how do I get my touch back to the software it was shipped to me with...I think it's the 2.2?
    Another question, if you buy your touch from another retailer [like Best Buy or Amazon] can you still take it into the Apple store if you need it repaired?
    Thanks to all who reply!
    AQ

    Downgrading the iOS is not supported by Apple. SOmetimes and iOS update does break compatibility.
    Have you went to Chrysler's support site?
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Resetting the car system               
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Is there a way to revert back to the old version of Cloud

    I installed Mountain Lion on my laptop to try it out before installing it on my Mac Pro. I didn't like it so I decided to leave the Mac Pro alone. Problem is, it installed the new version of Cloud and now I can't sync my Mac Pro. Now my laptop is broken. Is there a way to change back to the Cloud version that is recognized by Snow Leopard?
    Message was edited by: Niftyix

    If you mean MobileMe, no.  That's been closed since last July and was replaced with iCloud, which requires OS X Lion or higher.

  • How Do I Revert Back to The Old Version?

    Dead tired last night I automatically clicked "Install" when I saw the Safari download in updates thinking it was just the usual security fix, etc. Later when I launched Safari to get on the net I was horrified to see a whole new interface! As the owner of a small struggling business the last thing I need in the middle of my season is a new interface to learn. What is the easiest way for me to dump this new version of Safari and reinstall the old version from my SuperDuper backup?
    Thanks,
    Win

    If you have a bootable clone via SuperDuper then boot from the clone and choose backup all files.

  • Is there any way to revert back to the old Active X based Datasheet view?

    Hello,
    Is there a setting I can check to use the old Active X based Datasheet view from 2010? If not, then is there a way to have the new 2013 Datasheet view display more than 30 items per line? I clicked display all in the view settings and it displays 30
    items and gives me a little arrow at the bottom to get to the next set of 30. My list has close to 800 items and I want to edit them on one page without having to scroll to other pages. Its more user friendly that way

    > use the old Active X based Datasheet view from 2010
    No way I know of.
    But you can edit the view and set the item limit to a large number. One of my lists has 672 items and I can display them all in a single Quick Edit view.
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • Is there a way to revert back to the old 'New Tab' button?

    I would like to be able to place a 'New Tab' button right next to (or on) the current active tab like previous versions allowed.
    I believe even pre-RC versions of Firefox 4.0 did this, now I can't do this after updating to the latest version.
    (admittedly this was awhile ago now, but I figured I would try to figure it out)

    That new tab button should appear immediately to the right of the last tab.
    You can try to use Restore Default set in the Customize window to see if that brings back that button in the default location.
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
    See also:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT201210 The new iOS 7 download changed the screens tremendously making them difficult to read.  How can the type be darkened and enlarged?  Can you revert back to the old program?

    I downloaded iOS 7 to my iPhone. Now everything is lighter making it difficult to see. The words (letters) are smaller and the type is lighter.
    Questions:
    Is there anyway to change the type to display more distinctly as it did on the older version?
    If not, is there anyway to return to the older version?
    Also, on my weather app, my city name keeps changing to Southwood, SC. Sometimes I have both but usually the Southwood takes over my home city selection. I don't know where Southwood, SC is located and do not want it on my phone.
    Why is the app changing my selected home city  to Southwood, SC?
    How to I stop it from changing?
    Also, the top city on the weather app will not allow you to delete it. Why is this? The other additions can be deleted.

    Hi Jean4438,
    Welcome to the Support Communities!
    I made the changes below to my iPhone and have personally been delighted with how much easier everything is to read.  Hopefully they will help you as well.
    Large and bold text - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph73b89c6
    Here is the information for making changes to the Weather app:
    In most situations, you will swipe from right to left to see the Delete button.
    Weather - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph1ac0b35f
    Although this isn't your specific iPhone model, the tips and tricks in this new document may help you get started with iOS 7:
    Apple - iPhone - iPhone 4s Tips and Tricks
    http://www.apple.com/iphone-4s/tips/
    I hope this information helps ....
    Have a great day!
    - Judy

  • After selecting a photo in iPhoto 9.6, how can I quickly revert back to the main iPhoto page?

    Hello.  In my previous iPhoto program, after i had selected a photo and made any adjustments, I simply clicked on the photo and the page would revert back to the iPhoto main page with all my photos on it.  Now I seem to have to click on the upper left of the photo to accomplish the same thing and I find that slow and cumbersome.  Is there any quicker way to do it?  Thank you for any assistance.

    Is there any quicker way to do it?  Thank you for any assistance.
    In edit mode you can also use the arrow keys to step the photos - go to the next photo or previous photos.

  • Firefox 4 is not compatible with the skin i had been using for my browser, old factory black... i would prefer to keep this skin rather than use firefox 4... how can i revert back to the previous version of firefox?...

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/816154]''
    firefox 4 is not compatible with the skin i had been using for my browser, old factory black... i would prefer to keep this skin rather than use firefox 4... how can i revert back to the previous version of firefox?...

    Older versions of Firefox are available here:
    http://www.mozilla.com/en-US/firefox/all-older.html

Maybe you are looking for