I0S7 StatusBar Overlays stage, Adobe Air 3.9 Beta Bug VOTE this Bug

Hi
I am using Adobe air 3.9 Beta. It seems that iOS7 give you the the possibility to style the Statusbar. But if you open an adobe air application the statusbar overlays the stage by default. It creates problems with my tabs.
I tested the app with an iPod and IPhone, both with iOs7 Both have the Issues. If I compile the app with Adobe air 3.8 the Statusbar will be displayed correct.
But I can't use air 3.8 because I need the new Icons 120x120 76x76 etc.
Other people have the same issue. See screenshots https://github.com/mutualmobile/MMDrawerController/issues/51
I think the solution is in the info.plist. There is an option for the info.plist UIViewControllerBasedStatusBarAppearance. We need this paramter to activate or deactivate the Statusbar overlay.
Please vote to fix this bug
https://bugbase.adobe.com/index.cfm?event=bug&id=3633422
any Ideas for an workarround?
p.s.
sorry for double post in Air Development section

Hi,
up until now, I think this might be a general issue, even Xcode (5) apps have this.
However, if you just need the new icons you shouldn't care too much about this, you nearly can't see the differences when you adjust your icons a little bit (no border on the edges etc.), so I would rather use 3.8 (fast, since you might not be able to upload an app without the icons after tomorrow) and update it once those issues have been fixed (I think that this might need a while, since there are some more problems with 3.9).

Similar Messages

I0S7 StatusBar Overlays stage, Adobe Air 3.9 Beta Bug? Is there a Workarround

Hi
I am using Adobe air 3.9 Beta. It seems that iOS7 give you the the possibility to style the Statusbar. But if you open an adobe air application the statusbar overlays the stage by default. It creates problems with my tabs.
I tested the app with an iPod and IPhone, both with iOs7 Both have the Issues. If I compile the app with Adobe air 3.8 the Statusbar will be displayed correct.
But I can't use air 3.8 because I need the new Icons 120x120 76x76 etc.
Other people have the same issue. See screenshots https://github.com/mutualmobile/MMDrawerController/issues/51
I think the solution is in the info.plist. There is an option for the info.plist UIViewControllerBasedStatusBarAppearance. We need this paramter to activate or deactivate the Statusbar overlay.
any Ideas?

My variation of the problem shows different results in 790 and 1080. Here's what I'm doing, and what's different:
When I ask the user to pick a photo from their album, the status bar appears (my app is full screen, and no status bar is showing at first).
With build 790, the status bar is opaque, black background, and it sits on top of the title banner of the picker (the word "PHOTOS" gets obscured). When I return to the app, the status bar remains there, and is sitting on top of my stage content. The picker is iOS 6 styled.
With build 1080 the behavior is identical to the above, except that the status bar is transparent, and the picker is iOS 7 styled. The status bar does not obscure the "Photos" word, that is further down the screen. On returning to the app I see the black text of the status bar sat transparent on top of the top part of my stage content.
If I build for 3.8.0.910, the behavior is the same as it is for 3.9.0.790.
This is with the GM version of iOS 7.
Overall, I think I'll build for 1080, and hope the client doens't notice the remnants of the status bar. Hopefully you will have added the new icons to the next iOS 7 AIR build, and found a way to hide the status bar after showing the picker.

Adobe Air 2.0 beta causes overly transparent applications - unuseable

Hi,
   I'm running Crunchbang linux 9.04 (Ubuntu Jaunty) x64. I successfully installed Adobe Air 2.0 beta and apps run, but they are all so transparent that they can't be seen or used. Below is a screenpic of an adobe air application called doit.im. It works fine in Adobe air 1.5 on this rig, except it always asks me to click to okay the certificate and the window won't move, it's fixed where it is.
When running Adobe Air 2.0 apps, they are moveable, still ask me to click the certificate each time, but... they are WAY too unclear to see. When running the apps in a terminal, they yield no errors. I worked through all the gtk canberra errors successfully.
So I'm running the apps fine from 1.5, but just wondering if anyone know how to fix the overly transparent issue for adobe 2.0 beta - with X64 linux rigs.
    Thanks,
        Peace

Hi Tshann
Thanks for reporting this problem! We were aware of this issue and it will be fixed in the final release of AIR2.
-Thanks
Sundeep
AIR Team

Adobe AIR 2.0 beta out

hi guys,
Adobe AIR 2.0 beta 1 out
check it out in this url..
http://labs.adobe.com/downloads/air2.html
regards
Dhamu

Hi Tshann
Thanks for reporting this problem! We were aware of this issue and it will be fixed in the final release of AIR2.
-Thanks
Sundeep
AIR Team

Cant install or uninstall Adobe Air. Keep getting error message "This application requires a version of Adobe AIR which cannot be found"

I am running Windows 7 and use Adobe AIR for Flixster. When I tried to open Flixster I recieved an error message saying i needed to install Adobe AIR. I looked and saw that according to control panel, Adobe AIR is installed. I attempted to uninstall but get this EXACT message:
"This application requires a version of Adobe AIR which cannot be found. Please download the latest version of the runtime from http://www.adobe.com/go/getair, or contact the application author for an updated version."
I have tried going to the mentioned website but i get an error message saying installation failed and may need administrative privilages but I AM the administrator!
I then tried multiple solutions on the forums including the command prompt uninstall and still no luck. contacted customer support who told me i can only receive assistance through these forums.
Very frustrating. Please Help.

I have the same issue with a customer of ours:
Try to uninstall AIR – same message. (When I reinstall, the install says it’s successful.) I try to run our app, same message. I downloaded another AIR app, same message – so it’s not our app it’s AIR. We logged in as Administrator, same message. It’s a Windows7 machine. I did a system restore to 2 days ago and started over and still the same issues. I tried running the Windows Fixit to uninstall https://support.microsoft.com/en-us/mats/program_install_and_uninstall – didn’t work.

Adobe AIR 2.0 Major Bug

Hello,
We have an application built in Adobe AIR (HTML and Javascript Based).
It's been running for 14 months now with no problems.
Adobe came out with the AIR 2.0 version, and because the updates are pushed automaticaly to the clients, we started to suffer from major pages render issues.
The app is written in Hebrew. and now with version 2.0 we get every few paragraphs, in the middle of the paragraph a question mark or two instead of the letters, and sometimes it just drops letters.
This happens randomly and I can't put a rule on this.
Because Adobe pushes this upgrade, a lot of our customers updated to this buggy version.
This is a major issue. I wish to know if you know something about it or atleast tell me how can I easily revert this version back to AIR1.5.3 on the clients.
This software is in our main structure of the company. Adobe should not release new upgrades that are automatically updates on the client side. this is something that we, the developers, should push to our clients (after checking for bugs).
We spent a lot of hours and money to develop our app, what should we do now?
I wish to know how can I contact someone from the Adobe AIR team, and get this issue resolved ASAP.
Thanks,
Uri

Uri,
First, I am sorry to hear that your application was impacted. Whenever possible, we release public betas so that customers can report back issues related to backwards compatibility. In the case of AIR 2, we released two public betas.
However, per the Adobe AIR system requirements page, Hebrew is not a supported language. While it is possible that your application was working in an earlier version (AIR 1.5.3), it was still not a supported platform at that time.
I would encourage you to submit a bug using our feedback form and we'll take a look. However, to set expectations, we always prioritize supported systems over unsupported systems.
Feedback form (please provide all information necessary to reproduce the issue):
http://www.adobe.com/go/wish/
-Rob
Product Manager, Adobe AIR

Adobe AIR SDK 15 Beta (var dataSource:IDataInput = imagePromise.open();) crash on iOS

I have used Adobe AIR SDK15 to build a iOS app, which have a button to browse the Photo in the iPad, but when i run the line of code "var dataSource:IDataInput = imagePromise.open();", the app will be crash, any body experienced?

Hi Alericma,
Thank you for reporting issue, though we are not able to reproduce this issue at our end.
we have tried below code snippet,
protected function buttonclick(event:MouseEvent):void
var camera:CameraRoll=new CameraRoll();
if(CameraRoll.supportsBrowseForImage)
// Add event listeners for camera roll events
camera.addEventListener(MediaEvent.SELECT, imageSelected);
camera.addEventListener(Event.CANCEL, browseCancelled);
camera.addEventListener(ErrorEvent.ERROR, mediaError);
// Open up the camera roll
camera.browseForImage();
protected function imageSelected(evt:MediaEvent):void
       var imagepromise:MediaPromise=evt.data;
       try{
                 var dataSource:IDataInput=imagepromise.open();
       catch(err:Error)
            trace("Error Occured");
Could you please share the sample app, with device information,target and device OS, so that we can reproduce at our end.
Thank You

Bug Adobe Air 3.5 Beta with method "drawViewPortToBitmapData"

Hello,
I noticed there is a bug with the lastest build of Air 3.5 beta with the method "drawViewPortToBitmapData".
It resizes the viewport that we want to draw smaller that the original size.
Can you correct this bug before the release ?
Thanks,
Loïc L.

This was an issue with retina iPad's prior to AIR 3.5 .. I saw this fixed as of AIR 3.5. Altho it doesnt take a retina screen capture. It captures at 1024 x 768 and scales up to 2048 x 1536

Adobe AIR 3.9 beta sdk&compiler with ios 7 for windows download broken

Hi,
I couldn't download:
Download AIR 3.9 SDK & Compiler for Windows — with iOS7 support (ZIP, 204 MB)
from http://labs.adobe.com/downloads/air.html
The download gets to about 56mb or so and then cuts out. All other downloads work fine, just this one stops. I think that maybe the file was not uploaded right.
Cheers,
Grant

Hi,
The links is active and working, looks like some network issue at your end, please try again.
-Thanks
Pahup

Installing and using Adobe Air SDK 2.5 with Flash Professional CS4

Hi,
I am trying to install the Air SDK 2.5 with Flash Professional CS4 with the intention of creating a program to use Actionscript 3 to communicate with the UDP interface using datagrams. (The server is the IL2 device link interface) As I am very new to this development environment I was wondering if anyone could answer a few questions.
1) Can I use datagram sockets with Air 2.5 with Actionscript 3 and Flash CS4?
2) Is there special procedure for installing the AIR SDK 2.5 or do I use the instructions layout in "How to Overlay the Adobe Air 2 SDK for Use with Flash Professional - Flash professional CS4"?
3) If I do use those instructions, when I edit the namespace for my application do I set it to 2.0 or 2.5?
4) As a stepping stone to building my program I was trying to try to build the Actionscript 3 DatagramSocketExample program that is published by Adobe. Unfortunately I am getting a '1046: Type was not found or was not a compile-time constant: DatagramSocketDataEvent'.
Is there a step by step tutorial on how to get the example code up and running?
Thankyou for your time and patience with my noob questions
Ian

This was part of the AIR 2.0 beta release note, but I used this for 2.5 and it works nice.
You can try it too an make sure you use 2.5 wherever the not says 2.0beta2.
Goodluck.
How to Update Flash CS4 to Use the AIR 2 Beta SDK
If you use Flash CS4 Professional to build Adobe AIR applications, please follow the instructions below to manually update the version of the AIR SDK to use version 2.0.
Update Flash CS4 Professional to version 10.0.2 at http://www.adobe.com/support/flash/downloads.html or select "Help > Updates... " from within Flash CS4.
Quit Flash CS4 Professional if it is open.
Navigate to the Flash CS4 installation folder. The default location on Windows is "C:\Program Files\Adobe\Adobe Flash CS4\" and on Mac OS "/Applications/Adobe Flash CS4/"
Within the "Adobe Flash CS4" folder you should see a folder called "AIK1.5". If this folder is not present repeat step #1.
Rename the folder "AIK1.5" to "AIK1.5 OLD" or delete it if you do not need to save a copy of it.
Make a new folder called "AIK1.5"
Download the Adobe AIR 2 SDK from the labs website and uncompress the contents of the folder to the new "AIK1.5" folder you just created.
Copy the "airglobal.swc" file located within the "Adobe Flash CS4/AIK1.5/frameworks/libs/air/" folder into the "Adobe Flash CS4/Common/Configuration/ActionScript 3.0/AIR1.5/" folder.
Flash CS4 is now configured to use the AIR 2 beta 2 SDK.
In order to take advantage of the new AIR 2 beta 2 features, you will need to update your application descriptor file to use the "2.0beta2" namespace.

Flash Builder still shows adobe air 1.5.3 when creating a Flex project

How do I update Flash builder to now use Adobe air 2?

Hello,
Please follow the steps in the release note section: How to overlay the Adobe AIR SDK for use with the Flex SDK
Please let us know how it goes and if you run into difficulties.
Thanks,
Chris

Windows Xp Cannot Uninstall or Install Adobe Air.

I installed a new application that when I booted it It displayed the "This application requires Adobe air wich cannot be found" error. I already have adobe air, so I tried installing the latest version of air (didn't work), then after that I tried unstalling air but got the "This application requires Adobe air wich cannot be found" error again. I even tried manually uninstalling it and then reinstalling it but to no avail.
If any body could help with my promblem it would be much apreciated.

Please share the exact error message which you are getting while running the application? My guess is an appropriate Adobe AIR version is required for running this application. You can use the documentation http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html and use the check the determine the version of Adobe AIR on your computer.

Cannot update, uninstall or install Adobe AIR

I have a particularly puzzling problem.
AdobeAIR has never allowed me to update it. Ever. I have received countless notifications over the years, but everytime I clicked update, I received an error message. The version I have is 3.7.0.2090. I have attempted updating it to 16.0.0.273 all day. I continually receive this message:
"An error occurred while installing Adobe Air. Installation may not be allowed by your administrator. Please contact your administrator."
I have downloaded the latest version and selected "run as administrator". That didn't work. I tried creating a new administrator account on my pc and then selected "run as administrator" using that account. All to no avail.
I figured I might uninstall the version I have, so opened control panel (I'm running Windows 7, btw) and looked for the application in the Programmes list to uninstall it. However, the app was not listed. Anywhere.
I then found, in these forums, someone had a problem with updating and/or uninstalling and attempted a manual removal of some register keys. So following their instruction, I did that. However the issues and error messages remain unchanged.
I am at a complete loss. I cannot uninstall an app that doesn't exist. But I can't update the version I supposedly have.
Any help with this troubling issue would be most welcome.
Kind regards and desperate pleas...
podge
Edit: I have also tried repairing this problem using MicrosoftFixIt. That did not help.
Log File: Adobe Air log file - Pastebin.com
Message was edited by: podgemon

Please share the exact error message which you are getting while running the application? My guess is an appropriate Adobe AIR version is required for running this application. You can use the documentation http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html and use the check the determine the version of Adobe AIR on your computer.

Adobe AIR Apps + Safari = Very slow

Hi everybody,
I'm experiencing a strange behaviour of my Adobe AIR Apps on iPad. I've tested several Apps now (one GPU-Heavy Game, one CPU-Blitting App, one pretty standard Puzzle) and all of them do have the same issue - as soon as Safari is running in the background it sometimes (not always.. and most likely on iPad1) slows my App down to 1fps. Until I close Safari again. I haven't ever seen any other App doing so, thus I believe it's an Adobe AIR bug. Maybe only on iPad though.
Does anyone know why this happens or if I can get around of that? Besides my Apps run superfast.
What I've tested so far is:
- My memory usage is ~4mb. Doesn't seem to bother him if it's more or not
- My GPU-Cache is held quite low (but even with empty GPU Cache this issue appears)
- I'm using an Enter-Frame in all my apps which simulates the rendertick. Maybe this may be the fault?!
Many thanks in advance,
Marvin.

Furthermore:
- if the iPad was restarted you can have opened any iOS system-app without slowing down the Adobe AIR app
- nevertheless after some hours this bug occurs again.
Our game is in stores now: http://itunes.apple.com/us/app/ifunnel-frenzy-hd/id457822239?mt=8 and many people send us bugreports because of it. As soon as I'm telling them to close iOS system-apps things work superfine again.
You can download and test this bug for yourself - I think this might be pretty self-explaining then.
I'm a bit struggling how to solve this.. honestly.

Why is Adobe Air crashing Dofus on Windows 7 64-bit

Hello! I play an MMORPG called Dofus, which runs on Adobe Air.
I've been having this problem with Dofus since I started playing again a few weeks ago. My Dofus client and/or Adobe Air will crash, causing the error popup "DofusMod.exe has stopped responding". This happens many times a day, but it is not predictable. Sometimes I will go hours without a crash. Other times it crashes and re-load and re-login, and it immediately crashes again. I've tried everything that I can think of or find online, but there isn't much to go on. When you try to search for this problem all you find is stuff for MAC.
Systems Specs:
Windows 7 Home Premium SP1 64-bit
12GB of RAM
Intel Core i5 CPU
NVidia GeForce GTS 450 Graphics card
Dual Monitors
Adobe Air 3.7
Not sure what else you all might want to know about system specs.
Here is the data that gets logged into Event Viewer when this crash happens:
Faulting application name: DofusMod.exe, version: 0.0.0.0, time stamp: 0x4f9aad90
Faulting module name: Adobe AIR.dll, version: 3.4.0.2540, time stamp: 0x502c2269
Exception code: 0xc0000005
Fault offset: 0x004de65b
Faulting process id: 0x183c
Faulting application start time: 0x01ce5fa61afa53e0
Faulting application path: C:\Program Files (x86)\Dofus2\app\DofusMod.exe
Faulting module path: C:\Program Files (x86)\Dofus2\app\.runtime\3.4\Versions\1.0\Adobe AIR.dll
Report Id: a8864c9f-cb9a-11e2-b1e5-7071bc949f54
Things I have tried that do not fix my problem:
- Cleared Cache- Launching DofusMod.exe directly
- Running DofusMod.exe in compatibility mode for Windows XP SP3- Running DofusMod.exe as administrator
- Running the Launcher as administrator
- Installing different versions of Adobe Air
- Changing the AdobeAir.dll file located in the Dofus directory
- Closing every thing on my computer that I could possible close and still play the game
- Google. As I said, everything I can find is for a MAC, and is quite dated at that.
I play with 4 accounts, but this has happened with just one account open plenty of times. What, if anything, can I do to resolve this? It's not too bad when all I'm doing is leveling professions, but when I'm fighting mobs and one or two of my accounts just crashes randomly, it quickly becomes a major frustration.
This has never happened to me in the past so I don't know what could be causing it now. I'm tempted, but shouldn't be bothered, to setup a virtual machine running Ubuntu or something, specifically to play Dofus on. Please, if anyone can help me fix this it would be absolutely amazing.
Thanks!
**edit**
I've also started a topic on this problem at the Dofus "Problems and Solutions" forum. You can follow it here: http://forum.dofus.com/en/4-problems-solutions/253374-dofusmod-exe-stopped-responding

Oh, and if by chance you, too, run Windows 64 Bit and Flash CS4, I would appreciate if you could share any thing you did to your system or installation to make it work better.
Please don't just say, "Well, it works for me, blah blah blah."
Thanks.

I0S7 StatusBar Overlays stage, Adobe Air 3.9 Beta Bug VOTE this Bug

Similar Messages

Maybe you are looking for