I200 Wireless Remote Not Working

Evening all,
I've just received my I200 Wireless Remote from Creative, and it doesn't work .
I'm using the Creative I-Trigue 3300 speaker system, and tech support stated that the device would function with these speakers.
At the moment when i plug it in and press the power button, nothing happens.
Can anyone give me advice?
Regards
Craig

Luis -
Thank you for responding; I just this minute returned from my local Best Buy; the Mac guru there assisted me, and I found that I had to plug in the remote first, then turn on the iBook. It then recognized it as a keyboard, and we configured it from there. It's now working! Thank you again.

Similar Messages

Remote not working - doesn't seem to be pairing problem - any other ideas?

Remote not working - Unpair does nothing - Status light solid/screensaver running - no response from status light when any button clicked on remote - new batteries in remote - only Apple remote in the house - anyone have a suggestion?

Welcome to the Apple Community.
You might try restarting the Apple TV by removing ALL the cables for a 30 seconds.

Apple remote not working

My Apple remote is not working with my MacBook. The Mac OS X 10.5 Help Knowledge Base says to go to Security > Systems > and Disable remote control infrared receiver. I don't have a systems button or box nor the checkbox to Disable remote control infrared receiver. And, my MacBook has an infrared receiver.

Hi Focus,
I have the same problem. When I update from TIger to Leopard the front row apple remote still working. But is been a long time the last time i used and now on 10.5.2 osx the apple remote not working as I imagine.
I read some answers that help me understand better the problem. My check box of "disable remote.."is unchecked and I saw a "pair" button and try to pair with my apple remote. The tips told me to HOLD "menu" and "next" buttons of apple remote to pair him with computer. And Works fine. So I try to push only Menu button (as I've done so many times on tiger) but still does not working. So I realize the command to "start front row from apple remote" now on Leopard 10.5.2 is MENU+NEXT buttons and does not anymore only menu button. For me works like this.
While I write this answer I try again push and hold only MENU button and after almost 2 or 3 seconds holding button appears on screen an virtual image of my apple remote signaling to replace the battery, may be now will be works only on push menu, but I need to change the battery first.
I hope help somebody.

Apple infrared remote not working

Just a few days ago I updated Keynote, my time scale is a little hazy but I know recently, like last week, I used my appl infrared remote to control Keynote. I was able to press play and advance slides. This was a great thing, I remember doing and thinking wow apple is great. Now it doesn't work. I can turn the volume up but playing or advancing the slides does nothing. It sure seems like the last update removed this feature.
Anyone know whats going on?
Thanks,
Kris

Hi Kris,
If you are having an issue with your Apple Remote not working with your Keynote presentations, I would suggest that you troubleshoot using the steps in this article -
Troubleshooting the Apple Remote - Apple Support
Start with the section titled If you're using the remote with a computer.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Keyboard wireless key not working after upgrading to windows 8.1

Hello,
I am having hp pavilion dv6-6165tx notebook, where keyboard having a wireless button that turns ON and OFF all wireless devices, After upgrading to windows 8.1, HP Connection Manager is not getting installed, as well as Key is not working, key color turns red and white but no action is performed.
Kindly suggest me some solution.
Note: HP Doesn't provide drivers for windows 8/8.1 ONLY WINDOWS 7 for hp pavilion dv6-6165tx.
Thanks.

Hi @Jayesh_Bhadja ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6165tx Notebook and the Wireless keyboard not working correctly. Here is a link to troubleshoot the keyboard.
The HP Connection Manager is something that is for Windows 7 not Windows 8.1. I would uninstall this from your Notebook. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. It has a troubleshooting tool in this.
Make sure all your updates have been completed. I would try restarting my Notebook a few times.
If that does not help I would uninstall the keyboard from the Device manager.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Apple remote not working, is there a way to setup Apple TV without the remote

Apple remote not working, is there a way to setup Apple TV without the remote

Welcome to the Apple Community Sylvia.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

Hello @GeoffH777 ,
Perfect! You are very welcome, I am very happy to hear the reset helped!
If you have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
Greatly appreciated, have a wonderful day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Tecra A3 - Creative Mouse Wireless does not work

My Creative Mouse Wireless does not work while touchpad is installed.
Even if I disable the Touchpad, the mouse seal does not work.
Does anyone know how to solve this problem?
Thank you,
R.P.

Hello
On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
As far as I know functionality of external mouse doesn`t depend on touchpad settings.
Bye

Creative Entertainment Center in windows 7.the remote not working

how i can activate the remote from x-fi fatality champion series.after i change my system form vista to 7 my remote not working.can i install the software from vista?

B? You have Creative Console Launcher, I believe and that is the program you can use to change between audio creation, entertainment and gaming mode. Each mode highlights the card's specialities in that area. You have a vitural multi-track mixer in audio creation mode. You have Dolby and DTS encoder/decoder options in entertainment mode, and you have a generic access to the cards other features in gaming mode.

My wireless keypad not working even in a full battery, window display continously switching automatically without touching the cursor.

my wireless keypad not working even in full battery

I have a wireless keyboard with the attached keypad. The keyboard is working great, but the keypad quit working. I put in new batteries...did not help. Any suggestions?

I200 Wireless Remote

I have the Creative I-Trigue 5600 speaker system and i would like to find a wireless control solution. Ive come across the creative I200 remote, however the website does not specify if it will work with this particular system. The 5600 uses the same wired remote and connections as the 3600 which is compatable, yet i would like to know of the 5600 is definatly compatable and not mentioned simply because it is discontinued. If anyone has tried it or used another remote that works please help.

Actually, instead of asking that (unless anyone can answer it), can I just ask what connection the I200 uses to the sub? If it's the same as the current, wired remote on my speakers then I'll take my chances on it.
Thanks

Remote not working. network set up problem

okay... The remote app is not working.
I have installed it on my phone and successfully made it work both on my computer and on the computer in the mac store. So i know the iphone is not the problem. The problem is I had to set up a temporary network on my computer. I want to get the current network configured correctly to work with the iphone remote app.
Here is what is happening:
i open up remote, choose my library, the code comes up for me to enter. but itunes does not find my iphone.
Both the phone and the comp are using a wi-fi network from my router. It is password protected, both have the password installed in them. When i check system prefs on both they are using the same network.
When i went into the apple store, it instantly recognized my iphone and was able to set up the remote there.
On my own computer I can set up a secondary network and it works there. To so that I went to the airport icon on the top right, the pull down menu has "create network" as an option. I created a new network and THAT network used the remote app. But when i restart the computer that network is deleted.
What is configured incorrectly in my main wi-fi network that is not allowing the remote the be recognized?
I know the questions are going to come up:
i have itunes 8
iphone firmware is updated.
both have been reinstalled.
in itunes i do have the "accept remote" button clicked. i tried resetting it but it said it could not remove remotes since none were recognized yet.
I think that covers all the info i have on the problem. I really appreciate everyone's help on here. thanks!
gjclimer is online now Report Post Edit/Delete Message

I'm having this problem also and I'm in the process of reseting everything. I have tried turning iPod touch on/off, reinstalling the remote app and closing/opening iTunes.
Two things to check:
1. Go to View, Preferences, Sharing and make sure iTunes is set to share your library. Sometimes turning this on for the first time you connect the remote solves the problem and you can then turn it off again once it's working.
2. Make sure your wireless devices (everything connected to your wireless router) are on the same network as the computer you are trying to connect to. I have a main wired router going into my PC and use Airport Express as a wireless extender (basically plugging it into the router to beam the internet access out to wifi devices) and originally the main router put my PC on one network (172.x.x.x) whilst my wireless devices were on a different one (255.x.x.x), so the two devices couldn't see eachother. The way to solve this problem is to tell your wireless router to act as a 'bridge' under the wireless router's settings, which will extend the network of your wired router, rather than create a whole new one.
I'm not sure either of those will help but it's worth a go. I'll let you know if I solve the problem at my end and how I did it.

Wireless connection not working after installed newest Lenovo ThinkVantage System Update programs

Hi, everyone!
I've installed some newest programs through Lenovo ThinkVantage System Update and just after that my wireless connection has stopped working. Here are the installed programs:
ThinkPad UltraNav Driver for Windows 32-bit version 15.0.24.0;
ThinkPad Power Management Driver version 1.60;
ThinkPad Modem Adapter version 7.80.8.0;
ThinkPad Hotkey Features Integration Package Setup version 3.11.0001;
Inter Wireless WiFi Link for Window XP version 13.02.0000;
ThinkVantage Access Connections for Windows XP version 5.62;
ThinkPad Power Manager version 1.88;
Lenovo ThinkVantage Toolbox (32-bit) version 6.0.5514.61.
I've got a Lenovo T61 with Windows XP SP3.
Also in Device Manager, there are now the two "Other devices" bellow with a yellow question point and a yellow exclamation point by side:
Bluetooth Hands-free Audio;
Bluetooth LAN Access Server Driver.
Does anyone have any idea what can be done to have these issues solved?
P.S.: when I click Fn+F5 it shows only the Bluetooth Radio.

Hello and welcome,
I've seen something like this on XP machines after updates a couple of times now - my T61, a friend's T400, and his daughter's T61. I guess that makes 3
_Maybe_ your situation is the same.
The fix in all 3 cases was to go to device manager and uninstall the wifi driver. Then scan for hardware changes and let it reinstall the driver. Something about how Access Connections or some other networking mangement thingy was hooking the drivers I guess.
On both of the friend's machines, the wired networking was also b0rked. Same fix there.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Remote not working properly with Apple's iPod to TV dock/system

Everything appears to be set up right and the remote is communicating with the ipod base, which in turn is connected to the TV... But the Menu feature doesn't seem to work at all or defaults to the music library (no menu, just starts playing)... All the settings appear correct and if I manually select a TV show on the iPOD and can control the position and volume with the remote, but hitting the menu button as one would on the ipod to get the full list of shows either does notthing or starts the music... UG!!! Just bought this today and very diappointed that it seems buggy, not working...
I know this is probably not a high volume issue, but can someone please help???
Thanks!

Don't feel alone. I have the 80GB and my AV kit remote is doing the same thing. Start playing the video, pressing menu doesn't cause a response at all. However, if you hit the "go back" you end up back at the video menu. When you hit play it starts playing 1 of how many songs you have loaded in your ipod.
This has had to be known as an issue by now.
Cheers!

I200 Wireless Remote Not Working

Similar Messages

Maybe you are looking for