I4s goes blank when trying to message on hookt is anyone having same issue

My I 4s goes totally blank when using hookt . Does anyone have same problem and is there a fix ?

Hookt is a free ap thats like the BBM and allows I phones to chat with Black Berry users in the same fashion

Similar Messages

Adobe goes Blank when trying to print.

Hi,
When i click print, the software freezes and goes blank. this is happening repeatedly even after restarting numerous times.
My specs are:
Windows 7 Ultimate
and I just downloaded the patch.
thx to anyone who replies.

Which version of Reader do you have (Help->About) ? Which patch did you apply?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Lg cosmos touch goes blank when placing VM calls

My lg touch goes blank when calling vm & i cannot get the dial pad w/o opening the phone. I've seen other postings regarding resetting the proximity in the service menu but i cant find it on this phones menu. how / where do i go to reset the proximity settings IF that is what will fix it. thanks.

Hello yosmt! I've researched the operation you've mentioned (changing the proximity settings on the Cosmos Touch) and can't find any data on it. I can tell you this: If you're dialing to your voicemail or any other Interactive voice response system, the display should remain illuminated while the phone is held at a distance from the human face for at least 5 seconds. If your phone isn't doing that, then we have to discuss options other than changing settings. If you want, you can send me a personal message through the forum. Please include your name and mobile number. Thanks!

Diagram goes blank when bpel file is outside default dir

Hi,
I am using JDeveloper v10.1.2.1.0 and the “Diagram view” goes blank when I take the “.bpel” file from the project root directory (the default location) to some other directory, even though I modify the references accordingly. My suitcase looks like this:
<BPELSuitcase>
<BPELProcess id="TaskAssignment" src="../../bpel/TaskAssignment.bpel">
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">TaskAssignment.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
</BPELProcess>
</BPELSuitcase>
The project compiles successfully with “rebuild”, the “Source” tab allows me to see the BPEL source code, but the “Diagram view” remains blank. Why?
Thanks,
Manuel

I have the similiar issue even when the BPEL file is not touched or moved. This happens in I use the email activity.

<partnerLink name="client" partnerLinkType="client:AdaptationNotifier"
myRole="AdaptationNotifierProvider"
partnerRole="AdaptationNotifierRequester"/>
<partnerLink name="AdaptationService"
partnerLinkType="ns3:AdaptationService_PL"
partnerRole="AdaptationService_Role"/>
<partnerLink name="NotificationService"
partnerRole="NotificationServiceProvider"
partnerLinkType="ns1:NotificationServiceLink"/>
</partnerLinks>

<variables>

<variable name="inputVariable"
messageType="client:AdaptationNotifierRequestMessage"/>

<variable name="outputVariable"
messageType="client:AdaptationNotifierResponseMessage"/>
<variable name="Invoke_1_logMessage_InputVariable"
messageType="ns3:AdaptationService_logMessage"/>
<variable name="Invoke_1_logMessage_OutputVariable"
messageType="ns3:AdaptationService_logMessageResponse"/>
</variables>

<sequence name="main">
<receive name="Receive_Notification_Message" partnerLink="client"
portType="client:AdaptationNotifier" operation="initiate"
variable="inputVariable" createInstance="yes"/>
<scope name="Scope_1">
<scope name="Email_1">
<bpelx:annotation>
<bpelx:pattern patternName="bpelx:email"></bpelx:pattern>
</bpelx:annotation>
<variables>
<variable name="varNotificationReq"
messageType="ns1:EmailNotificationRequest"/>
<variable name="varNotificationResponse"
messageType="ns1:ArrayOfResponse"/>
<variable name="NotificationServiceFaultVariable"
messageType="ns1:NotificationServiceErrorMessage"/>
</variables>
<faultHandlers>
<catchAll>
<invoke name="Invoke_1" partnerLink="AdaptationService"
portType="ns3:AdaptationService"
operation="logMessage"
inputVariable="Invoke_1_logMessage_InputVariable"
outputVariable="Invoke_1_logMessage_OutputVariable"/>
</catchAll>
</faultHandlers>
<sequence name="Sequence_1">
<assign name="EmailParamsAssign">
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
<copy>
<from expression="string('Default')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:FromAccountName"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Bcc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Cc"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:ReplyToAddress"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Subject"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:To"/>
</copy>
<copy>
<from expression="string('')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody"/>
</copy>
<copy>
<from expression="string('text/html; charset=UTF-8')"/>
<to variable="varNotificationReq"
part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:MimeType"/>
</copy>
</assign>
<invoke name="InvokeNotificationService"
partnerLink="NotificationService"
portType="ns1:NotificationService"
operation="sendEmailNotification"
inputVariable="varNotificationReq"
outputVariable="varNotificationResponse"/>
</sequence>
</scope>
</scope>
</sequence>
</process>

My screen goes blank when receiving or making calls.

My screen goes blank when receiving or making calls. Cannot get back to the tiles window until the other party hangs up.

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Themes are blank when trying to make a card in iPhoto

themes are blank when trying to make a card in iPhoto. Cards appear blank/white, no patterns, no detail. Tried re-downloading the latest update of iPhoto but no difference. Any ideas?

Greetings,
You need to reinstall iPhoto.
Questions:
What version of iPhoto are you running (iPhoto > About iPhoto)?
What version of the Mac OS are you running (Apple > About this Mac)?
General steps:
Remove the following files to the trash:
Macintosh HD > Library > Application Support > iPhoto (if present)
Macintosh HD > Library > Application Support > NetServices (if present)
Macintosh HD > Library > Receipts > iPhoto (anything with iPhoto in the name)
Macintosh HD > Applications > iPhoto
Insert the iLife install disk you have or the Applications disk that came with your computer and reinstall iPhoto: http://support.apple.com/kb/HT2604
Once installation is complete go to the Apple > Software update and repeat this until no additional updates are offered.
Hope that helps.

HT4061 Why when trying to message or FaceTime my mom On her iPad, it will not go through. I tried sending to her iPad number and email address.

Why when trying to message or FaceTime my mom On her iPad, it will not go through. I tried sending to her iPad number and email address.

Hi Judy,
You can easily make FaceTime calls by opening the FaceTime app on your iPhone and entering in the email address and you will see an option for a FaceTime call. You can also create a contact for that person to make it easier if you plan on making frequent calls to them. Take a look at the link below for more information.
Make and answer calls
http://help.apple.com/iphone/8/#/iph7801d5771
Take it easy,
-Norm G.

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

Everytime I open Safari it downloads a series of blank.aspx files into my downloads folder. Anyone having the same problem?

Everytime I open Safari it downloads a series of blank.aspx files into my downloads folder. Anyone having the same problem?

Has there been a fix for this yet? I am downloading close to 150 blank aspx files every 15 minutes. I have tried the fix from Carolyn Samit and the AdBlock seems to be working thus far, but when it is not working it launches Adobe Dreamweaver. Which is going berzerker.
Any help would be much appreciated.
Thanks to all on this community.

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

5th generation ipod not detected by my windows xp. works fine on other pc. performed necessary steps to remove and reinstall itunes but having same issue. is there a driver i can download to pc then direct to that specific location when installing?

I have a similar issue - my iPod nano connects and is visible in Device Manager yet invisible in My Computer and iTunes. I've tried everything I can possibly think of to try and solve this myself, all in vain.
Mine is a nano 4G. I've been using it for quite some time without the slightest problem. I have been using WINAMP instead of iTunes to manage my darling nano.
Then, one fine day I bought a new computer and the nano would not show up in My Computer, though the nano display shows "Do not disconnect". On my old computer it worked (and still works) absolutely fine with win XP as well as with win7 (the later I currently use on my new/problematic computer, which I bought last summer and that's how long I've had this problem).
Of course, after several first attempts I gave up and installed iTunes. I've tried using the Apple support article "iPod not recognized in 'My Computer' and in iTunes for Windows":
- reset
- fully charged,
- cable works fine on two other computers
- in normal or disk mode makes no difference
- tried to find anything useful in the diagnostics mode
- reinstalled iTunes several different times since then to the latest version
- I've unplugged every other USB device except for my mouse and keyboard and tried several different USB ports on my motherboard (USB 3.0 and conventional), as well as trying different USB- related options in my BIOS.
- I've never used any Mac with this ipod
- I've tried fiddling with the win7 Services by stopping and restarting them and of course
- uninstalling the iPod drivers in Device Manager. After such an uninstall the ipod would automatically be recognised and "ready for use", i.e. being invisible in My Computer.
- Attempted to find any possible third-party conflict with msconfig or the possibility that my ipod is being confused for a network drive (for which I've disconnected my HDD, leaving only my SSD with the OS).
Sometimes, iTunes would note that iPod service (or something, can't remember exactly) failed to install properly and asked to try and repair it. I would click YES! and voila - no change! The ipod would rarely show up in iTunes on my problematic computer like this:
iTunes would warn me that the nano would need restoring so I would try and do it on my haunted machine upon which iTunes would freeze like you seen in the picture.
Despite this, I've updated and restored the nano on my father's computer to the latest version without any problems. This though, did not solve my problem in any way.
I can load music to my nano through my old computer (which for me is a real pain and hassle) and the gadget works normally in terms of its disconnected functionality.
I've taken my nano to the local service for repair and they said it was fine. Mercifully, they didn't charge for the diagnostics service (gee, thanks for not ripping me off!).
Here are two screengrabs from my Device Manager
and Devices and Printers screens on my comp:
That is my sad story as far as I can remember. It's most likely something with the drivers or something along those lines though I'm out of ideas at this point.
If you think you have any idea PLEASR HELP, I'M DESPERATE!

Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

updated ipad to IOS8,plus itunes 12.0.1,now when click on itunes-devices- no apps, magazines etc are visible except music,movies etc
what have they done?

My iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in all it does is vibrate. Anyone having this issue??

My Iphone will not revert back from silent mode. It will play when i am scrolling through ringtones but when a text or incoming call comes in it just vibrates. Anyone having this issue??

I have the same problem with my iPhone 5c after update to iOS 8 every time i have to restart my phone to solve the silent issue

Help..Screen Goes blank.. Error message will be more useful..

Hi All, I have a spry Dataset test page that works great in 'live View' but when I put it online, it flashes and goes blank.
no error message, nothing:
http://video360.world-television.com/CCOH/concept.html
I am getting the xml data from HTTP request BS...
what am I missing?

it looks like the issue is the <body spry:region="ds1 ds3 nds2">
as i need all of the datasets displayed I have put it in the body, and it works in CS5 live
tried moving it to the top div, with not much luck..
whats the best practice for spry:region with multiple datasets?

I4s goes blank when trying to message on hookt is anyone having same issue

Similar Messages

Maybe you are looking for